---

yaml
---
r: 236494
b: refs/heads/auto
c: 219eca1
h: refs/heads/master
v: v3

Author: bors

[refs]

@@ -8,7 +8,7 @@ refs/tags/release-0.3: b5f0d0f648d9a6153664837026ba1be43d3e2503
 refs/tags/release-0.3.1: 495bae036dfe5ec6ceafd3312b4dca48741e845b
 refs/tags/release-0.4: e828ea2080499553b97dfe33b3f4d472b4562ad7
 refs/tags/release-0.5: 7e3bcfbf21278251ee936ad53e92e9b719702d73
-refs/heads/auto: 804efdabcdf5c44051845e11cdcd10efa636688e
+refs/heads/auto: 219eca11b044de3644b3e9101124513c1a842b09
 refs/tags/release-0.6: b4ebcfa1812664df5e142f0134a5faea3918544c
 refs/tags/0.1: b19db808c2793fe2976759b85a355c3ad8c8b336
 refs/tags/0.2: 1754d02027f2924bed83b0160ee340c7f41d5ea1

branches/auto/COMPILER_TESTS.md

@@ -1,6 +1,6 @@
 # Compiler Test Documentation
 
-In the Rust project, we use a special set of comands imbedded in
+In the Rust project, we use a special set of comands embedded in
 comments to test the Rust compiler. There are two groups of commands:
 
 1. Header commands
@@ -29,11 +29,11 @@ The error levels that you can have are:
 3. `NOTE`
 4. `HELP` and `SUGGESTION`*
 
-\* **Note**: `SUGGESTION` must follow emediatly after `HELP`.
+\* **Note**: `SUGGESTION` must follow immediately after `HELP`.
 
 ## Summary of Header Commands
 
-Header commands specify something about the entire test file, as a
+Header commands specify something about the entire test file as a
 whole, instead of just a few lines inside the test.
 
 * `ignore-X` where `X` is an architecture, OS or stage will ignore the test accordingly

branches/auto/Makefile.in

@@ -26,7 +26,7 @@
 #
 #   * check - Run the complete test suite
 #
-#   * clean - Clean the build repertory. It is advised to run this
+#   * clean - Clean the build repository. It is advised to run this
 #             command if you want to build Rust again, after an update
 #             of the git repository.
 #

branches/auto/RELEASES.md

@@ -1,4 +1,4 @@
-Version 1.3.0 (September 2015)
+Version 1.3.0 (2015-09-17)
 ==============================
 
 * ~900 changes, numerous bugfixes

branches/auto/configure

@@ -1095,6 +1095,12 @@ envopt CPP
 envopt CFLAGS
 envopt CXXFLAGS
 
+# stdc++ name in use
+# used to manage non-standard name (on OpenBSD for example)
+program_transform_name=$($CFG_CC -v 2>&1 | sed -n "s/.*--program-transform-name='\([^']*\)'.*/\1/p")
+CFG_STDCPP_NAME=$(echo "stdc++" | sed "${program_transform_name}")
+putvar CFG_STDCPP_NAME
+
 # a little post-processing of various config values
 CFG_PREFIX=${CFG_PREFIX%/}
 CFG_MANDIR=${CFG_MANDIR%/}
@@ -1289,6 +1295,12 @@ $ pacman -R cmake && pacman -S mingw-w64-x86_64-cmake
             putvar CFG_MSVC_LIB_PATH_${bits}
             ;;
 
+        *-rumprun-netbsd)
+            step_msg "targeting rumprun-netbsd, disabling jemalloc"
+            CFG_DISABLE_JEMALLOC=1
+            putvar CFG_DISABLE_JEMALLOC
+            ;;
+
         *)
             ;;
     esac

branches/auto/mk/cfg/x86_64-rumprun-netbsd.mk

@@ -0,0 +1,24 @@
+# x86_64-rumprun-netbsd configuration
+CROSS_PREFIX_x86_64-rumprun-netbsd=x86_64-rumprun-netbsd-
+CC_x86_64-rumprun-netbsd=gcc
+CXX_x86_64-rumprun-netbsd=g++
+CPP_x86_64-rumprun-netbsd=gcc -E
+AR_x86_64-rumprun-netbsd=ar
+CFG_INSTALL_ONLY_RLIB_x86_64-rumprun-netbsd = 1
+CFG_LIB_NAME_x86_64-rumprun-netbsd=lib$(1).so
+CFG_STATIC_LIB_NAME_x86_64-rumprun-netbsd=lib$(1).a
+CFG_LIB_GLOB_x86_64-rumprun-netbsd=lib$(1)-*.so
+CFG_JEMALLOC_CFLAGS_x86_64-rumprun-netbsd := -m64
+CFG_GCCISH_CFLAGS_x86_64-rumprun-netbsd := -Wall -Werror -g -fPIC -m64
+CFG_GCCISH_CXXFLAGS_x86_64-rumprun-netbsd :=
+CFG_GCCISH_LINK_FLAGS_x86_64-rumprun-netbsd :=
+CFG_GCCISH_DEF_FLAG_x86_64-rumprun-netbsd :=
+CFG_LLC_FLAGS_x86_64-rumprun-netbsd :=
+CFG_INSTALL_NAME_x86_64-rumprun-netbsd =
+CFG_EXE_SUFFIX_x86_64-rumprun-netbsd =
+CFG_WINDOWSY_x86_64-rumprun-netbsd :=
+CFG_UNIXY_x86_64-rumprun-netbsd := 1
+CFG_LDPATH_x86_64-rumprun-netbsd :=
+CFG_RUN_x86_64-rumprun-netbsd=$(2)
+CFG_RUN_TARG_x86_64-rumprun-netbsd=$(call CFG_RUN_x86_64-rumprun-netbsd,,$(2))
+CFG_GNU_TRIPLE_x86_64-rumprun-netbsd := x86_64-rumprun-netbsd

branches/auto/mk/cfg/x86_64-unknown-netbsd.mk

@@ -1,4 +1,5 @@
 # x86_64-unknown-netbsd configuration
+CROSS_PREFIX_x86_64-unknown-netbsd=x86_64-unknown-netbsd-
 CC_x86_64-unknown-netbsd=$(CC)
 CXX_x86_64-unknown-netbsd=$(CXX)
 CPP_x86_64-unknown-netbsd=$(CPP)

branches/auto/mk/dist.mk

@@ -77,6 +77,7 @@ $(PKG_TAR): $(PKG_FILES)
          -C $(S) \
          --exclude-vcs \
          --exclude=*~ \
+         --exclude=*.pyc \
          --exclude=*/llvm/test/*/*.ll \
          --exclude=*/llvm/test/*/*.td \
          --exclude=*/llvm/test/*/*.s \

branches/auto/mk/grammar.mk

@@ -58,17 +58,17 @@ check-lexer: $(BG) $(BG)RustLexer.class check-build-lexer-verifier
 	$(Q)$(SG)check.sh $(S) "$(BG)" \
 		"$(CFG_GRUN)" "$(BG)verify" "$(BG)RustLexer.tokens"
 else
-$(info cfg: grun not available, skipping lexer test...)
+$(info cfg: lexer tooling not available, skipping lexer test...)
 check-lexer:
 
 endif
 else
-$(info cfg: antlr4 not available, skipping lexer test...)
+$(info cfg: lexer tooling not available, skipping lexer test...)
 check-lexer:
 
 endif
 else
-$(info cfg: javac not available, skipping lexer test...)
+$(info cfg: lexer tooling not available, skipping lexer test...)
 check-lexer:
 
 endif

branches/auto/mk/llvm.mk

@@ -73,7 +73,7 @@ $$(LLVM_STAMP_$(1)): $(S)src/rustllvm/llvm-auto-clean-trigger
 
 ifeq ($$(CFG_ENABLE_LLVM_STATIC_STDCPP),1)
 LLVM_STDCPP_RUSTFLAGS_$(1) = -L "$$(dir $$(shell $$(CC_$(1)) $$(CFG_GCCISH_CFLAGS_$(1)) \
-					-print-file-name=libstdc++.a))"
+					-print-file-name=lib$(CFG_STDCPP_NAME).a))"
 else
 LLVM_STDCPP_RUSTFLAGS_$(1) =
 endif
@@ -83,7 +83,7 @@ endif
 LLVM_LINKAGE_PATH_$(1):=$$(abspath $$(RT_OUTPUT_DIR_$(1))/llvmdeps.rs)
 $$(LLVM_LINKAGE_PATH_$(1)): $(S)src/etc/mklldeps.py $$(LLVM_CONFIG_$(1))
 	$(Q)$(CFG_PYTHON) "$$<" "$$@" "$$(LLVM_COMPONENTS)" "$$(CFG_ENABLE_LLVM_STATIC_STDCPP)" \
-		$$(LLVM_CONFIG_$(1))
+		$$(LLVM_CONFIG_$(1)) "$(CFG_STDCPP_NAME)"
 endef
 
 $(foreach host,$(CFG_HOST), \

branches/auto/mk/platform.mk

@@ -208,6 +208,14 @@ define CFG_MAKE_TOOLCHAIN
 
   ifeq ($$(findstring $(HOST_$(1)),arm aarch64 mips mipsel powerpc),)
 
+  # On OpenBSD, we need to pass the path of libstdc++.so to the linker
+  # (use path of libstdc++.a which is a known name for the same path)
+  ifeq ($(OSTYPE_$(1)),unknown-openbsd)
+    RUSTC_FLAGS_$(1)=-L "$$(dir $$(shell $$(CC_$(1)) $$(CFG_GCCISH_CFLAGS_$(1)) \
+        -print-file-name=lib$(CFG_STDCPP_NAME).a))" \
+        $(RUSTC_FLAGS_$(1))
+  endif
+
   # On Bitrig, we need the relocation model to be PIC for everything
   ifeq (,$(filter $(OSTYPE_$(1)),bitrig))
     LLVM_MC_RELOCATION_MODEL="pic"

branches/auto/src/compiletest/compiletest.rs

@@ -348,7 +348,7 @@ fn extract_gdb_version(full_version_line: Option<String>) -> Option<String> {
           if !full_version_line.trim().is_empty() => {
             let full_version_line = full_version_line.trim();
 
-            // used to be a regex "(^|[^0-9])([0-9]\.[0-9])([^0-9]|$)"
+            // used to be a regex "(^|[^0-9])([0-9]\.[0-9]+)"
             for (pos, c) in full_version_line.char_indices() {
                 if !c.is_digit(10) { continue }
                 if pos + 2 >= full_version_line.len() { continue }
@@ -357,11 +357,12 @@ fn extract_gdb_version(full_version_line: Option<String>) -> Option<String> {
                 if pos > 0 && full_version_line.char_at_reverse(pos).is_digit(10) {
                     continue
                 }
-                if pos + 3 < full_version_line.len() &&
-                   full_version_line.char_at(pos + 3).is_digit(10) {
-                    continue
+                let mut end = pos + 3;
+                while end < full_version_line.len() &&
+                      full_version_line.char_at(end).is_digit(10) {
+                    end += 1;
                 }
-                return Some(full_version_line[pos..pos+3].to_owned());
+                return Some(full_version_line[pos..end].to_owned());
             }
             println!("Could not extract GDB version from line '{}'",
                      full_version_line);

branches/auto/src/compiletest/runtest.rs

@@ -1669,8 +1669,7 @@ fn compile_test_and_save_ir(config: &Config, props: &TestProps,
     // FIXME (#9639): This needs to handle non-utf8 paths
     let mut link_args = vec!("-L".to_owned(),
                              aux_dir.to_str().unwrap().to_owned());
-    let llvm_args = vec!("--emit=llvm-ir".to_owned(),
-                         "--crate-type=lib".to_owned());
+    let llvm_args = vec!("--emit=llvm-ir".to_owned(),);
     link_args.extend(llvm_args);
     let args = make_compile_args(config,
                                  props,

branches/auto/src/doc/README.md

@@ -2,9 +2,10 @@
 
 ## Building
 
-To generate all the docs, just run `make docs` from the root of the repository.
-This will convert the distributed Markdown docs to HTML and generate HTML doc
-for the 'std' and 'extra' libraries.
+To generate all the docs, follow the "Building Documentation" instructions in
+the README in the root of the repository. This will convert the distributed
+Markdown docs to HTML and generate HTML doc for the books, 'std' and 'extra'
+libraries.
 
 To generate HTML documentation from one source file/crate, do something like:
 

branches/auto/src/doc/complement-project-faq.md

@@ -22,7 +22,7 @@ Existing languages at this level of abstraction and efficiency are unsatisfactor
 
 # Is any part of this thing production-ready?
 
-No. Feel free to play around, but don't expect completeness or stability yet. Expect incompleteness and breakage.
+Yes!
 
 # Is this a completely Mozilla-planned and orchestrated thing?
 

branches/auto/src/doc/grammar.md

@@ -9,7 +9,7 @@ provides only one kind of material:
 
 This document does not serve as an introduction to the language. Background
 familiarity with the language is assumed. A separate [guide] is available to
-help acquire such background familiarity.
+help acquire such background.
 
 This document also does not serve as a reference to the [standard] library
 included in the language distribution. Those libraries are documented