Add alt texts to images

Author: wouterj

_build/_exts/symfonycom/__pycache__/__init__.cpython-310.pyc

@@ -11,7 +11,8 @@ cursor position in a console command. This allows you to write on any position
 of the output:
 
 .. image:: /_images/components/console/cursor.gif
-   :align: center
+    :alt: A command outputs on various positions on the screen, eventually
+          drawing the letters "SF".
 
 .. code-block:: php
 

_build/_exts/symfonycom/sphinx/__pycache__/__init__.cpython-310.pyc

@@ -8,7 +8,9 @@ the results of running ``figlet symfony``, it might output something like
 this:
 
 .. image:: /_images/components/console/debug_formatter.png
-   :align: center
+    :alt: Console output, with the first line showing "RUN Running figlet",
+          followed by lines showing the output of the command prefixed with
+          "OUT" and "RES Finished the command" as last line in the output.
 
 Using the debug_formatter
 -------------------------

_build/_exts/symfonycom/sphinx/__pycache__/lexer.cpython-310.pyc

@@ -19,14 +19,21 @@ a very verbose verbosity (e.g. ``-vv``)::
 will result in this output:
 
 .. image:: /_images/components/console/process-helper-verbose.png
+    :alt: Console output showing two lines: "RUN 'figlet' 'Symfony'" and
+          "RES Command ran successfully".
 
 It will result in more detailed output with debug verbosity (e.g. ``-vvv``):
 
 .. image:: /_images/components/console/process-helper-debug.png
+    :alt: In between the command line and the result line, the
+          command's output is now shown prefixed by "OUT".
 
 In case the process fails, debugging is easier:
 
 .. image:: /_images/components/console/process-helper-error-debug.png
+    :alt: The last line shows "RES 127 Command dit not run successfully",
+          and the output lines show more the error information from the
+          command.
 
 Arguments
 ---------

components/console/helpers/cursor.rst

@@ -5,6 +5,9 @@ When executing longer-running commands, it may be helpful to show progress
 information, which updates as your command runs:
 
 .. image:: /_images/components/console/progressbar.gif
+    :alt: Console output showing a progress bar advance to 100%, with
+          the esimated time left, the memory usage and a special message
+          that changes when the bar closes completion.
 
 .. note::
 

components/console/helpers/debug_formatter.rst

@@ -511,7 +511,9 @@ done by passing a special form "view" object to your template (notice the
     {{ form_end(form) }}
 
 .. image:: /_images/form/simple-form.png
-    :align: center
+    :alt: An HTML form showing a text box labelled "Task", three select
+          boxes for a year, month and day labelled "Due date" and a button
+          labelled "Create Task".
 
 That's it! By printing ``form_widget(form)``, each field in the form is
 rendered, along with a label and error message (if there is one). While this is

components/console/helpers/processhelper.rst

@@ -72,7 +72,10 @@ and ends with a :class:`Symfony\\Component\\HttpFoundation\\Response`.
 
 .. raw:: html
 
-    <object data="../_images/components/http_kernel/http-workflow.svg" type="image/svg+xml"></object>
+    <object data="../_images/components/http_kernel/http-workflow.svg" type="image/svg+xml"
+        alt="A flow diagram showing all HTTP Kernel events in the Request-Response lifecycle.
+             Each event is numbered 1 to 8 and described in detail in the following subsections."
+    ></object>
 
 The exact details of this workflow are the key to understanding how the kernel
 (and the Symfony Framework or any other library that uses the kernel) works.
@@ -504,7 +507,10 @@ to the exception.
 
 .. raw:: html
 
-    <object data="../_images/components/http_kernel/http-workflow-exception.svg" type="image/svg+xml"></object>
+    <object data="../_images/components/http_kernel/http-workflow-exception.svg" type="image/svg+xml"
+        alt="The HTTP KErnel flow diagram showing how exceptions bypass all further steps and are
+             directly transformed to responses."
+    ></object>
 
 Each listener to this event is passed a :class:`Symfony\\Component\\HttpKernel\\Event\\ExceptionEvent`
 object, which you can use to access the original exception via the
@@ -663,7 +669,10 @@ your controller).
 
 .. raw:: html
 
-    <object data="../_images/components/http_kernel/http-workflow-subrequest.svg" type="image/svg+xml"></object>
+    <object data="../_images/components/http_kernel/http-workflow-subrequest.svg" type="image/svg+xml"
+        alt="The HTTP Kernel flow diagram with a sub request from a controller starting the lifecycle
+             at step 1 again and feeding the sub Response content back into the controller."
+    ></object>
 
 To execute a sub request, use ``HttpKernel::handle()``, but change the second
 argument as follows::

components/console/helpers/progressbar.rst

@@ -27,7 +27,10 @@ Concepts
 
 .. raw:: html
 
-    <object data="../_images/components/messenger/overview.svg" type="image/svg+xml"></object>
+    <object data="../_images/components/messenger/overview.svg" type="image/svg+xml"
+        alt="A flow diagram visualizing how each concept relates to eachother. Each
+             concept is described in the subsequent text."
+    ></object>
 
 **Sender**:
    Responsible for serializing and sending messages to *something*. This

components/form.rst

@@ -8,15 +8,21 @@ In order to do so, the Serializer component follows the following schema.
 
 .. raw:: html
 
-    <object data="../_images/components/serializer/serializer_workflow.svg" type="image/svg+xml"></object>
-
-As you can see in the picture above, an array is used as an intermediary between
-objects and serialized contents. This way, encoders will only deal with turning
-specific **formats** into **arrays** and vice versa. The same way, Normalizers
-will deal with turning specific **objects** into **arrays** and vice versa.
-
-Serialization is a complex topic. This component may not cover all your use cases out of the box,
-but it can be useful for developing tools to serialize and deserialize your objects.
+    <object data="../_images/components/serializer/serializer_workflow.svg" type="image/svg+xml"
+        alt="A flow diagram showing how objects are serialized/deserialized. This is described
+             in the subsequent paragraph."
+    ></object>
+
+When (de)serializing objects, the Serializer uses an array as the intermediary
+between objects and serialized contents. Encoders will only deal with
+turning specific **formats** into **arrays** and vice versa. The same way,
+normalizers will deal with turning specific **objects** into **arrays** and
+vice versa. The Serializer deals with calling the normalizers and encoders
+when serializing objects or deserializing formats.
+
+Serialization is a complex topic. This component may not cover all your use
+cases out of the box, but it can be useful for developing tools to
+serialize and deserialize your objects.
 
 Installation
 ------------

components/http_kernel.rst

@@ -48,7 +48,11 @@ The following image displays the bytes, code points and grapheme clusters for
 the same word written in English (``hello``) and Hindi (``नमस्ते``):
 
 .. image:: /_images/components/string/bytes-points-graphemes.png
-   :align: center
+    :alt: Each letter in "hello" is made up of one byte, one code point and
+          one grapheme cluster. In the Hindi translation, the first two
+          letters ("नम") take up three bytes, one code point and one
+          grapheme cluster. The last letters ("स्ते") each take up six
+          bytes, two code points and one grapheme cluster.
 
 Usage
 -----

components/messenger.rst

@@ -354,6 +354,7 @@ then its dump representation::
     dump($var);
 
 .. image:: /_images/components/var_dumper/01-simple.png
+    :alt: Dump output showing the array with length five and all keys and values.
 
 .. note::
 
@@ -371,6 +372,7 @@ then its dump representation::
     dump($var);
 
 .. image:: /_images/components/var_dumper/02-multi-line-str.png
+    :alt: Dump output showing the string on multiple lines in between three quotes.
 
 .. code-block:: php
 
@@ -385,6 +387,7 @@ then its dump representation::
     dump($var);
 
 .. image:: /_images/components/var_dumper/03-object.png
+    :alt: Dump output showing the PropertyExample object and all three properties with their values.
 
 .. note::
 
@@ -403,6 +406,8 @@ then its dump representation::
     dump($var);
 
 .. image:: /_images/components/var_dumper/04-dynamic-property.png
+    :alt: Dump output showing the DynamicPropertyExample object and both
+          declared and undeclared properties with their values.
 
 .. code-block:: php
 
@@ -415,6 +420,8 @@ then its dump representation::
     dump($var);
 
 .. image:: /_images/components/var_dumper/05-soft-ref.png
+    :alt: Dump output showing the "aCircularReference" property value referencing
+          the parent object, instead of showing all properties again.
 
 .. code-block:: php
 
@@ -428,6 +435,7 @@ then its dump representation::
     dump($var);
 
 .. image:: /_images/components/var_dumper/06-constants.png
+    :alt: Dump output with the "E_WARNING" constant shown as value of "severity".
 
 .. code-block:: php
 
@@ -441,6 +449,7 @@ then its dump representation::
     dump($var);
 
 .. image:: /_images/components/var_dumper/07-hard-ref.png
+    :alt: Dump output showing the referenced arrays.
 
 .. code-block:: php
 
@@ -451,6 +460,7 @@ then its dump representation::
     dump($var);
 
 .. image:: /_images/components/var_dumper/08-virtual-property.png
+    :alt: Dump output of the ArrayObject.
 
 .. code-block:: php
 
@@ -464,6 +474,7 @@ then its dump representation::
     dump($var);
 
 .. image:: /_images/components/var_dumper/09-cut.png
+    :alt: Dump output where the children of the Container object are hidden.
 
 .. _var-dumper-advanced:
 

components/serializer.rst

@@ -22,6 +22,7 @@ process is called a *place*. You do also define *transitions* that describe
 the action to get from one place to another.
 
 .. image:: /_images/components/workflow/states_transitions.png
+    :alt: An example state diagram for a workflow, showing transitions and places.
 
 A set of places and transitions creates a **definition**. A workflow needs
 a ``Definition`` and a way to write the states to the objects (i.e. an

components/string.rst

@@ -77,6 +77,8 @@ commands support name and option completion, and some can even complete
 values.
 
 .. image:: /_images/components/console/completion.gif
+    :alt: The terminal completes the command name "secrets:remove" and the
+          argument "SOME_OTHER_SECRET".
 
 First, make sure you installed and setup the "bash completion" package for
 your OS (typically named ``bash-completion``). Then, install the Symfony

components/var_dumper.rst

@@ -91,8 +91,8 @@ Several things need to be paid attention to when picking a stack trace
 from your development environment through a web browser:
 
 1. Are there several exceptions? If yes, the most interesting one is
-   often exception 1/n which, is shown *last* in the example below (it
-   is the one marked as an exception [1/2]).
+   often exception 1/n which, is shown *last* in the default exception page
+   (it is the one marked as ``exception [1/2]`` in the below example).
 2. Under the "Stack Traces" tab, you will find exceptions in plain
    text, so that you can easily share them in e.g. bug reports. Make
    sure to **remove any sensitive information** before doing so.
@@ -102,8 +102,9 @@ from your development environment through a web browser:
    are getting, but are not what the term "stack trace" refers to.
 
 .. image:: /_images/contributing/code/stack-trace.gif
-   :align: center
-   :class: with-browser
+    :alt: The default Symfony exception page with the "Exceptions", "Logs"
+          and "Stack Traces" tabs.
+    :class: with-browser
 
 Since stack traces may contain sensitive data, they should not be
 exposed in production. Getting a stack trace from your production

components/workflow.rst

@@ -25,8 +25,8 @@ while you're reading the Symfony documentation.
 and you'll be redirected to GitHub:
 
 .. image:: /_images/contributing/docs-github-edit-page.png
-   :align: center
-   :class: with-browser
+    :alt: The "Edit this page" button is located directly below the first heading.
+    :class: with-browser
 
 **Step 2.** Edit the contents, describe your changes and click on the
 **Propose file change** button.
@@ -36,8 +36,8 @@ and you'll be redirected to GitHub:
 also display a preview of your changes:
 
 .. image:: /_images/contributing/docs-github-create-pr.png
-   :align: center
-   :class: with-browser
+    :alt: The "Comparing changes" page on GitHub.
+    :class: with-browser
 
 If everything is correct, click on the **Create pull request** button.
 
@@ -152,7 +152,7 @@ exact changes that you want to propose, select the appropriate branches where
 changes should be applied:
 
 .. image:: /_images/contributing/docs-pull-request-change-base.png
-   :align: center
+    :alt: The base branch select option on the GitHub page.
 
 In this example, the **base fork** should be ``symfony/symfony-docs`` and
 the **base** branch should be the ``5.4``, which is the branch that you selected

console.rst

@@ -10,18 +10,17 @@ Symfony catches all the exceptions and displays a special **exception page**
 with lots of debug information to help you discover the root problem:
 
 .. image:: /_images/controller/error_pages/exceptions-in-dev-environment.png
-   :alt: A typical exception page in the development environment
-   :align: center
-   :class: with-browser
+    :alt: A typical exception page in the development environment with the
+          full stacktrace and log information.
+    :class: with-browser
 
 Since these pages contain a lot of sensitive internal information, Symfony won't
 display them in the production environment. Instead, it'll show a minimal and
 generic **error page**:
 
 .. image:: /_images/controller/error_pages/errors-in-prod-environment.png
-   :alt: A typical error page in the production environment
-   :align: center
-   :class: with-browser
+    :alt: A typical error page in the production environment.
+    :class: with-browser
 
 Error pages for the production environment can be customized in different ways
 depending on your needs:

contributing/code/stack_trace.rst

@@ -185,8 +185,11 @@ objects to a ``product`` table in your database. Each property in the ``Product`
 entity can be mapped to a column in that table. This is usually done with attributes:
 the ``#[ORM\Column(...)]`` comments that you see above each property:
 
-.. image:: /_images/doctrine/mapping_single_entity.png
-   :align: center
+.. raw:: html
+
+    <object data="../_images/doctrine/mapping_single_entity.svg" type="image/svg+xml"
+        alt="Doctrine mapping between properties of a Product PHP object and the data in the product database table"
+    ></object>
 
 The ``make:entity`` command is a tool to make life easier. But this is *your* code:
 add/remove fields, add/remove methods or update configuration.
@@ -586,8 +589,8 @@ the :ref:`doctrine-queries` section.
     will display the number of queries and the time it took to execute them:
 
     .. image:: /_images/doctrine/doctrine_web_debug_toolbar.png
-       :align: center
-       :class: with-browser
+        :alt: The web dev toolbar showing the Doctrine item.
+        :class: with-browser
 
     If the number of database queries is too high, the icon will turn yellow to
     indicate that something may not be correct. Click on the icon to open the

contributing/documentation/overview.rst

@@ -409,8 +409,11 @@ When you go to ``/product``, a single row is added to both the ``category`` and
 to whatever the ``id`` is of the new category. Doctrine manages the persistence of this
 relationship for you:
 
-.. image:: /_images/doctrine/mapping_relations.png
-    :align: center
+.. raw:: html
+
+    <object data="../_images/doctrine/mapping_relations.svg" type="image/svg+xml"
+        alt="Doctrine mapping associated Product and Category entities to a product and category database table"
+    ></object>
 
 If you're new to an ORM, this is the *hardest* concept: you need to stop thinking
 about your database, and instead *only* think about your objects. Instead of setting
@@ -456,8 +459,11 @@ Doctrine silently makes a second query to find the ``Category`` that's related
 to this ``Product``. It prepares the ``$category`` object and returns it to
 you.
 
-.. image:: /_images/doctrine/mapping_relations_proxy.png
-    :align: center
+.. raw:: html
+
+    <object data="../_images/doctrine/mapping_relations_proxy.svg" type="image/svg+xml"
+        alt="Doctrine only querying Category data when needed"
+    ></object>
 
 What's important is the fact that you have access to the product's related
 category, but the category data isn't actually retrieved until you ask for