Getting started

• If using Windows, install WSL: https://docs.microsoft.com/en-us/windows/wsl/install-win10#manual-installation-steps
  • Both WSL 1 or WSL 2 should work. However, when in doubt, WSL 1 is probably a better choice.
• Download VSCode https://code.visualstudio.com/Download
• Open the terminal
• cd into the desired workspace
• git clone https://github.com/uorocketry/rocket-code-2020.git --recurse-submodules
• cd rocket-code-2020
• Install the necessary libraries and build tools: ninja-build, cmake, gcc, make, boost, protobuf, libi2c
  • Command for Debian/Ubuntu: sudo apt update && sudo apt install ninja-build cmake gcc g++ make libboost-all-dev protobuf-compiler libi2c-dev
• Compile the project with - ./build.sh
  • To run the Hotfire test code without a pi - USE_RADIO=0 USE_GPIO=0 USE_WIRING_PI=0 HOTFIRE_TEST=1 ./build.sh
• You can now run the project locally with - ./run.sh

To update the github submodules

• git submodule update --init --recursive

Once you are setup:

• Check the stuff in the Next Up column in the GitHub project
• Check out how to set up the environment variables with this wiki page https://github.com/uorocketry/rocket-code-2020/wiki/Environment-Variables