Skip to content

Commit 097966b

Browse files
cmonrcmonr
authored
Merge pull request #5905 from ithinuel/add-CMWX1ZZABZ-078-support
add support for the murata's module CMWX1ZZABZ-078 based on STM32L0
2 parents 5cd30b9 + f8e88d7 commit 097966b

File tree

21 files changed

+10070
-1
lines changed

21 files changed

+10070
-1
lines changed

‎targets/TARGET_STM/TARGET_STM32L0/TARGET_STM32L0x2xZ/TARGET_CMWX1ZZABZ_078/PeripheralNames.h

Lines changed: 78 additions & 0 deletions
Original file line numberDiff line numberDiff line change
@@ -0,0 +1,78 @@
1+
/* mbed Microcontroller Library
2+
*******************************************************************************
3+
* Copyright (c) 2017, STMicroelectronics
4+
* All rights reserved.
5+
*
6+
* Redistribution and use in source and binary forms, with or without
7+
* modification, are permitted provided that the following conditions are met:
8+
*
9+
* 1. Redistributions of source code must retain the above copyright notice,
10+
* this list of conditions and the following disclaimer.
11+
* 2. Redistributions in binary form must reproduce the above copyright notice,
12+
* this list of conditions and the following disclaimer in the documentation
13+
* and/or other materials provided with the distribution.
14+
* 3. Neither the name of STMicroelectronics nor the names of its contributors
15+
* may be used to endorse or promote products derived from this software
16+
* without specific prior written permission.
17+
*
18+
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
19+
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
20+
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
21+
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
22+
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
23+
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
24+
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
25+
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
26+
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
27+
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
28+
*******************************************************************************
29+
*/
30+
#ifndef MBED_PERIPHERALNAMES_H
31+
#define MBED_PERIPHERALNAMES_H
32+
33+
#include "cmsis.h"
34+
35+
#ifdef __cplusplus
36+
extern "C" {
37+
#endif
38+
39+
typedef enum {
40+
ADC_1 = (int)ADC1_BASE
41+
} ADCName;
42+
43+
typedef enum {
44+
DAC_1 = (int)DAC_BASE
45+
} DACName;
46+
47+
typedef enum {
48+
UART_1 = (int)USART1_BASE,
49+
UART_2 = (int)USART2_BASE,
50+
UART_4 = (int)USART4_BASE,
51+
UART_5 = (int)USART5_BASE,
52+
LPUART_1 = (int)LPUART1_BASE
53+
} UARTName;
54+
55+
typedef enum {
56+
SPI_1 = (int)SPI1_BASE,
57+
SPI_2 = (int)SPI2_BASE
58+
} SPIName;
59+
60+
typedef enum {
61+
I2C_1 = (int)I2C1_BASE,
62+
I2C_2 = (int)I2C2_BASE,
63+
I2C_3 = (int)I2C3_BASE
64+
} I2CName;
65+
66+
typedef enum {
67+
PWM_1 = (int)LPTIM1_BASE,
68+
PWM_2 = (int)TIM2_BASE,
69+
PWM_3 = (int)TIM3_BASE,
70+
PWM_21 = (int)TIM21_BASE,
71+
PWM_22 = (int)TIM22_BASE
72+
} PWMName;
73+
74+
#ifdef __cplusplus
75+
}
76+
#endif
77+
78+
#endif

‎targets/TARGET_STM/TARGET_STM32L0/TARGET_STM32L0x2xZ/TARGET_CMWX1ZZABZ_078/PeripheralPins.c

Lines changed: 166 additions & 0 deletions
Original file line numberDiff line numberDiff line change
@@ -0,0 +1,166 @@
1+
/* mbed Microcontroller Library
2+
*******************************************************************************
3+
* Copyright (c) 2017, STMicroelectronics
4+
* All rights reserved.
5+
*
6+
* Redistribution and use in source and binary forms, with or without
7+
* modification, are permitted provided that the following conditions are met:
8+
*
9+
* 1. Redistributions of source code must retain the above copyright notice,
10+
* this list of conditions and the following disclaimer.
11+
* 2. Redistributions in binary form must reproduce the above copyright notice,
12+
* this list of conditions and the following disclaimer in the documentation
13+
* and/or other materials provided with the distribution.
14+
* 3. Neither the name of STMicroelectronics nor the names of its contributors
15+
* may be used to endorse or promote products derived from this software
16+
* without specific prior written permission.
17+
*
18+
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
19+
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
20+
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
21+
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
22+
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
23+
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
24+
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
25+
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
26+
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
27+
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
28+
*******************************************************************************
29+
*/
30+
31+
#include "PeripheralPins.h"
32+
33+
// =====
34+
// Note: Commented lines are alternative possibilities which are not used per default.
35+
// If you change them, you will have also to modify the corresponding xxx_api.c file
36+
// for pwmout, analogin, analogout, ...
37+
// =====
38+
39+
//*** ADC ***
40+
41+
const PinMap PinMap_ADC[] = {
42+
{PA_0, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 0, 0)}, // BLUE-LED
43+
{PA_2, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // POT
44+
{PA_3, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // BUTTON
45+
{PA_4, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // RED-LED
46+
{PA_5, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // GREEN-LED
47+
{NC, NC, 0}
48+
};
49+
50+
const PinMap PinMap_ADC_Internal[] = {
51+
{ADC_TEMP, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 17, 0)}, // Internal channel
52+
{ADC_VREF, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 0, 0)}, // Internal channel
53+
{ADC_VBAT, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 18, 0)}, // Internal channel
54+
{NC, NC, 0}
55+
};
56+
57+
//*** DAC ***
58+
59+
const PinMap PinMap_DAC[] = {
60+
{PA_4, DAC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // RED-LED
61+
{PA_5, DAC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // GREEN-LED
62+
{NC, NC, 0}
63+
};
64+
65+
//*** I2C ***
66+
67+
const PinMap PinMap_I2C_SDA[] = {
68+
{PA_10, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF6_I2C1)},
69+
{PB_7, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)},
70+
{PB_9, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)}, // SDA
71+
{PB_14, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF5_I2C2)},
72+
{NC, NC, 0}
73+
};
74+
75+
const PinMap PinMap_I2C_SCL[] = {
76+
{PA_9, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF6_I2C1)},
77+
{PB_6, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)},
78+
{PB_8, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)}, // SCL
79+
{PB_13, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF5_I2C2)},
80+
{NC, NC, 0}
81+
};
82+
83+
//*** PWM ***
84+
// Pins using TIM21 cannot be used as TIM21 is already used by ticker.
85+
const PinMap PinMap_PWM[] = {
86+
{PA_0, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 1, 0)}, // TIM2_CH1
87+
// {PA_2, PWM_21, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM21, 1, 0)}, // TIM21_CH1
88+
{PA_2_ALT0, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 3, 0)}, // TIM2_CH3
89+
// {PA_3, PWM_21, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM21, 2, 0)}, // TIM21_CH2
90+
{PA_3_ALT0, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 4, 0)}, // TIM2_CH4
91+
{PA_5, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM2, 1, 0)}, // TIM2_CH1
92+
{PB_2, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_LPTIM1, 0, 0)}, // TIM2_CH2
93+
{PB_5, PWM_22, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM22, 2, 0)}, // TIM22_CH2
94+
{PB_5_ALT0, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM3, 2, 0)}, // TIM3_CH2
95+
// {PB_13, PWM_21, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM21, 1, 0)}, // TIM21_CH1
96+
// {PB_14, PWM_21, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM21, 2, 0)}, // TIM21_CH2
97+
{NC, NC, 0}
98+
};
99+
100+
//*** SERIAL ***
101+
102+
const PinMap PinMap_UART_TX[] = {
103+
{PA_2, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART2)},
104+
{PA_2_ALT0, LPUART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_LPUART1)},
105+
{PA_9, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART1)},
106+
{PA_14, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART2)},
107+
{PA_14_ALT0, LPUART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_LPUART1)}, // SWCLK
108+
{PB_6, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART1)},
109+
{NC, NC, 0}
110+
};
111+
112+
const PinMap PinMap_UART_RX[] = {
113+
{PA_1, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_USART4)},
114+
{PA_3, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART2)},
115+
{PA_3_ALT0, LPUART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_LPUART1)},
116+
{PA_10, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART1)},
117+
{PA_13, LPUART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_LPUART1)}, // SWDIO
118+
{PB_7, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART1)},
119+
{NC, NC, 0}
120+
};
121+
122+
const PinMap PinMap_UART_RTS[] = {
123+
{PA_12, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART1)},
124+
{PB_12, LPUART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_LPUART1)},
125+
{PB_14, LPUART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_LPUART1)},
126+
{NC, NC, 0}
127+
};
128+
129+
const PinMap PinMap_UART_CTS[] = {
130+
{PA_0, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART2)},
131+
{PA_11, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART1)},
132+
{PB_13, LPUART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_LPUART1)},
133+
{NC, NC, 0}
134+
};
135+
136+
//*** SPI ***
137+
138+
const PinMap PinMap_SPI_MOSI[] = {
139+
{PA_7, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, // MOSI
140+
{PA_12, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
141+
{PB_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
142+
{PB_15, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI2)}, // MOSI
143+
{NC, NC, 0}
144+
};
145+
146+
const PinMap PinMap_SPI_MISO[] = {
147+
{PA_6, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
148+
{PA_11, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
149+
{PB_14, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI2)}, // MISO
150+
{NC, NC, 0}
151+
};
152+
153+
const PinMap PinMap_SPI_SCLK[] = {
154+
{PA_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
155+
{PB_3, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, // SCK
156+
{PB_13, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI2)}, // SCK
157+
{NC, NC, 0}
158+
};
159+
160+
const PinMap PinMap_SPI_SSEL[] = {
161+
{PA_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
162+
{PA_15, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
163+
{PB_9, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
164+
{PB_12, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI2)}, // /SD_CS
165+
{NC, NC, 0}
166+
};

0 commit comments

Comments
 (0)