Added target XBED_LPC1768

libraries/mbed/targets/cmsis/TARGET_NXP/TARGET_LPC176X/TOOLCHAIN_GCC_ARM/TARGET_XBED_LPC1768/XBED_LPC1768.ld

@@ -0,0 +1,172 @@
+/* Linker script for mbed LPC1768 */
+
+/* Linker script to configure memory regions. */
+MEMORY
+{
+  FLASH (rx) : ORIGIN = 0x00002000, LENGTH = 504K
+  RAM (rwx) : ORIGIN = 0x100000C8, LENGTH = (32K - 0xC8)
+
+  USB_RAM(rwx) : ORIGIN = 0x2007C000, LENGTH = 16K
+  ETH_RAM(rwx) : ORIGIN = 0x20080000, LENGTH = 16K
+}
+
+/* Linker script to place sections and symbol values. Should be used together
+ * with other linker script that defines memory regions FLASH and RAM.
+ * It references following symbols, which must be defined in code:
+ *   Reset_Handler : Entry of reset handler
+ * 
+ * It defines following symbols, which code can use without definition:
+ *   __exidx_start
+ *   __exidx_end
+ *   __etext
+ *   __data_start__
+ *   __preinit_array_start
+ *   __preinit_array_end
+ *   __init_array_start
+ *   __init_array_end
+ *   __fini_array_start
+ *   __fini_array_end
+ *   __data_end__
+ *   __bss_start__
+ *   __bss_end__
+ *   __end__
+ *   end
+ *   __HeapLimit
+ *   __StackLimit
+ *   __StackTop
+ *   __stack
+ */
+ENTRY(Reset_Handler)
+
+SECTIONS
+{
+    .text :
+    {
+        KEEP(*(.isr_vector))
+        *(.text*)
+
+        KEEP(*(.init))
+        KEEP(*(.fini))
+
+        /* .ctors */
+        *crtbegin.o(.ctors)
+        *crtbegin?.o(.ctors)
+        *(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors)
+        *(SORT(.ctors.*))
+        *(.ctors)
+
+        /* .dtors */
+        *crtbegin.o(.dtors)
+        *crtbegin?.o(.dtors)
+        *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors)
+        *(SORT(.dtors.*))
+        *(.dtors)
+
+        *(.rodata*)
+
+        KEEP(*(.eh_frame*))
+    } > FLASH
+
+    .ARM.extab : 
+    {
+        *(.ARM.extab* .gnu.linkonce.armextab.*)
+    } > FLASH
+
+    __exidx_start = .;
+    .ARM.exidx :
+    {
+        *(.ARM.exidx* .gnu.linkonce.armexidx.*)
+    } > FLASH
+    __exidx_end = .;
+
+    __etext = .;
+
+    .data : AT (__etext)
+    {
+        __data_start__ = .;
+        Image$$RW_IRAM1$$Base = .;
+        *(vtable)
+        *(.data*)
+
+        . = ALIGN(4);
+        /* preinit data */
+        PROVIDE (__preinit_array_start = .);
+        KEEP(*(.preinit_array))
+        PROVIDE (__preinit_array_end = .);
+
+        . = ALIGN(4);
+        /* init data */
+        PROVIDE (__init_array_start = .);
+        KEEP(*(SORT(.init_array.*)))
+        KEEP(*(.init_array))
+        PROVIDE (__init_array_end = .);
+
+
+        . = ALIGN(4);
+        /* finit data */
+        PROVIDE (__fini_array_start = .);
+        KEEP(*(SORT(.fini_array.*)))
+        KEEP(*(.fini_array))
+        PROVIDE (__fini_array_end = .);
+
+        . = ALIGN(4);
+        /* All data end */
+        __data_end__ = .;
+
+    } > RAM
+
+
+    .bss :
+    {
+        __bss_start__ = .;
+        *(.bss*)
+        *(COMMON)
+        __bss_end__ = .;
+        Image$$RW_IRAM1$$ZI$$Limit = . ;
+    } > RAM
+
+
+    .heap :
+    {
+        __end__ = .;
+        end = __end__;
+        *(.heap*)
+        __HeapLimit = .;
+    } > RAM
+
+    /* .stack_dummy section doesn't contains any symbols. It is only
+     * used for linker to calculate size of stack sections, and assign
+     * values to stack symbols later */
+    .stack_dummy :
+    {
+        *(.stack)
+    } > RAM
+
+    /* Set stack top to end of RAM, and stack limit move down by
+     * size of stack_dummy section */
+    __StackTop = ORIGIN(RAM) + LENGTH(RAM);
+    __StackLimit = __StackTop - SIZEOF(.stack_dummy);
+    PROVIDE(__stack = __StackTop);
+
+    /* Check if data + heap + stack exceeds RAM limit */
+    ASSERT(__StackLimit >= __HeapLimit, "region RAM overflowed with stack")
+
+
+    /* Code can explicitly ask for data to be 
+       placed in these higher RAM banks where
+       they will be left uninitialized. 
+    */
+    .AHBSRAM0 (NOLOAD):
+    {
+        Image$$RW_IRAM2$$Base = . ;
+        *(AHBSRAM0)
+        Image$$RW_IRAM2$$ZI$$Limit = .;
+    } > USB_RAM
+
+    .AHBSRAM1 (NOLOAD):
+    {
+        Image$$RW_IRAM3$$Base = . ;
+        *(AHBSRAM1)
+        Image$$RW_IRAM3$$ZI$$Limit = .;
+    } > ETH_RAM
+}

libraries/mbed/targets/hal/TARGET_NXP/TARGET_LPC176X/TARGET_XBED_LPC1768/PinNames.h

@@ -0,0 +1,143 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_PINNAMES_H
+#define MBED_PINNAMES_H
+
+#include "cmsis.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+    PIN_INPUT,
+    PIN_OUTPUT
+} PinDirection;
+
+#define PORT_SHIFT  5
+
+typedef enum {
+    // LPC Pin Names
+    P0_0 = LPC_GPIO0_BASE,
+          P0_1, P0_2, P0_3, P0_4, P0_5, P0_6, P0_7, P0_8, P0_9, P0_10, P0_11, P0_12, P0_13, P0_14, P0_15, P0_16, P0_17, P0_18, P0_19, P0_20, P0_21, P0_22, P0_23, P0_24, P0_25, P0_26, P0_27, P0_28, P0_29, P0_30, P0_31,
+    P1_0, P1_1, P1_2, P1_3, P1_4, P1_5, P1_6, P1_7, P1_8, P1_9, P1_10, P1_11, P1_12, P1_13, P1_14, P1_15, P1_16, P1_17, P1_18, P1_19, P1_20, P1_21, P1_22, P1_23, P1_24, P1_25, P1_26, P1_27, P1_28, P1_29, P1_30, P1_31,
+    P2_0, P2_1, P2_2, P2_3, P2_4, P2_5, P2_6, P2_7, P2_8, P2_9, P2_10, P2_11, P2_12, P2_13, P2_14, P2_15, P2_16, P2_17, P2_18, P2_19, P2_20, P2_21, P2_22, P2_23, P2_24, P2_25, P2_26, P2_27, P2_28, P2_29, P2_30, P2_31,
+    P3_0, P3_1, P3_2, P3_3, P3_4, P3_5, P3_6, P3_7, P3_8, P3_9, P3_10, P3_11, P3_12, P3_13, P3_14, P3_15, P3_16, P3_17, P3_18, P3_19, P3_20, P3_21, P3_22, P3_23, P3_24, P3_25, P3_26, P3_27, P3_28, P3_29, P3_30, P3_31,
+    P4_0, P4_1, P4_2, P4_3, P4_4, P4_5, P4_6, P4_7, P4_8, P4_9, P4_10, P4_11, P4_12, P4_13, P4_14, P4_15, P4_16, P4_17, P4_18, P4_19, P4_20, P4_21, P4_22, P4_23, P4_24, P4_25, P4_26, P4_27, P4_28, P4_29, P4_30, P4_31,
+
+    // mbed DIP Pin Names
+    p5 = P0_9,
+    p6 = P0_8,
+    p7 = P0_7,
+    p8 = P0_6,
+    p9 = P0_0,
+    p10 = P0_1,
+    p11 = P0_18,
+    p12 = P0_17,
+    p13 = P0_15,
+    p14 = P0_16,
+    p15 = P0_23,
+    p16 = P0_24,
+    p17 = P0_25,
+    p18 = P0_26,
+    p19 = P1_30,
+    p20 = P1_31,
+    p21 = P2_5,
+    p22 = P2_4,
+    p23 = P2_3,
+    p24 = P2_2,
+    p25 = P2_1,
+    p26 = P2_0,
+    p27 = P0_11,
+    p28 = P0_10,
+    p29 = P0_5,
+    p30 = P0_4,
+
+
+    LED1 = P1_18,
+    LED2 = P1_20,
+    LED3 = P1_21,
+    LED4 = P1_23,
+
+    USBTX = P0_2,
+    USBRX = P0_3,
+
+	//xbed lpc1768 Pin Names
+	LED5 = P2_6,
+	BTN1 = P2_8,
+	SDA = P0_27,
+	SCL = P0_28,
+	ISP = P2_10,
+	CLK = P1_27,
+
+
+
+    // Arch Pro Pin Names
+    D0 = P4_29,
+    D1 = P4_28,
+    D2 = P0_4,
+    D3 = P0_5,
+    D4 = P2_2,
+    D5 = P2_3,
+    D6 = P2_4,
+    D7 = P2_5,
+    D8 = P0_0,
+    D9 = P0_1,
+    D10 = P0_6,
+    D11 = P0_9,
+    D12 = P0_8,
+    D13 = P0_7,
+    D14 = P0_27,
+    D15 = P0_28,
+
+    A0 = P0_23,
+    A1 = P0_24,
+    A2 = P0_25,
+    A3 = P0_26,
+    A4 = P1_30,
+    A5 = P1_31,
+
+    I2C_SCL = D15,
+    I2C_SDA = D14,
+
+    // Not connected
+    NC = (int)0xFFFFFFFF
+} PinName;
+
+typedef enum {
+    PullUp = 0,
+    PullDown = 3,
+    PullNone = 2,
+    Repeater = 1,
+    OpenDrain = 4,
+    PullDefault = PullDown
+} PinMode;
+
+// version of PINCON_TypeDef using register arrays
+typedef struct {
+  __IO uint32_t PINSEL[11];
+       uint32_t RESERVED0[5];
+  __IO uint32_t PINMODE[10];
+  __IO uint32_t PINMODE_OD[5];
+} PINCONARRAY_TypeDef;
+
+#define PINCONARRAY ((PINCONARRAY_TypeDef *)LPC_PINCON_BASE)
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif

libraries/mbed/targets/hal/TARGET_NXP/TARGET_LPC176X/TARGET_XBED_LPC1768/device.h

@@ -0,0 +1,60 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_DEVICE_H
+#define MBED_DEVICE_H
+
+#define DEVICE_PORTIN           1
+#define DEVICE_PORTOUT          1
+#define DEVICE_PORTINOUT        1
+
+#define DEVICE_INTERRUPTIN      1
+
+#define DEVICE_ANALOGIN         1
+#define DEVICE_ANALOGOUT        1
+
+#define DEVICE_SERIAL           1
+#define DEVICE_SERIAL_FC        1
+
+#define DEVICE_I2C              1
+#define DEVICE_I2CSLAVE         1
+
+#define DEVICE_SPI              1
+#define DEVICE_SPISLAVE         1
+
+#define DEVICE_CAN              1
+
+#define DEVICE_RTC              1
+
+#define DEVICE_ETHERNET         1
+
+#define DEVICE_PWMOUT           1
+
+#define DEVICE_SEMIHOST         1
+#define DEVICE_LOCALFILESYSTEM  1
+#define DEVICE_ID_LENGTH       32
+#define DEVICE_MAC_OFFSET      20
+
+#define DEVICE_SLEEP            1
+
+#define DEVICE_DEBUG_AWARENESS  1
+
+#define DEVICE_STDIO_MESSAGES   1
+
+#define DEVICE_ERROR_PATTERN    1
+
+#include "objects.h"
+
+#endif

libraries/mbed/targets/hal/TARGET_NXP/TARGET_LPC176X/TARGET_XBED_LPC1768/reserved_pins.h

@@ -0,0 +1,8 @@
+// List of reserved pins for MBED LPC1768
+
+#ifndef RESERVED_PINS_H
+#define RESERVED_PINS_H
+
+#define TARGET_RESERVED_PINS {}
+
+#endif