Skip to content

STM32 : enable PinMap_GPIO table #14451

New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Merged
merged 3 commits into from
Apr 28, 2021
Merged

STM32 : enable PinMap_GPIO table #14451

Show file tree
Hide file tree
Changes from all commits
Commits
Show all changes
3 commits
Select commit Hold shift + click to select a range
297522b
STM32: enable PinMap_GPIO table with GPIO_PINMAP_READY
jeromecoutant Mar 19, 2021
4e9ef59
DISCO_L475VG_IOT01A: enable PinMap_GPIO[]
jeromecoutant Mar 19, 2021
d219378
NUCLEO_WB55RG: enable PinMap_GPIO[]
jeromecoutant Mar 19, 2021
File filter

Filter by extension

Filter by extension
Conversations
Failed to load comments.
Loading
Jump to
Jump to file
Failed to load files.
Loading
Diff view
Diff view
6 changes: 6 additions & 0 deletions targets/TARGET_STM/PeripheralPins.h
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -34,6 +34,12 @@
#include "pinmap.h"
#include "PeripheralNames.h"

//*** GPIO ***
#if GPIO_PINMAP_READY
/* If this macro is defined, then PinMap_GPIO is present in PeripheralPins.c */
extern const PinMap PinMap_GPIO[];
#endif

//*** ADC ***
#if DEVICE_ANALOGIN
extern const PinMap PinMap_ADC[];
Expand Down
123 changes: 99 additions & 24 deletions ...RGET_STM/TARGET_STM32L4/TARGET_STM32L475xG/TARGET_DISCO_L475VG_IOT01A/PeripheralPinMaps.h
View file
Open in desktop
Original file line number Diff line number Diff line change
@@ -1,31 +1,18 @@
/* mbed Microcontroller Library
*******************************************************************************
* Copyright (c) 2018, STMicroelectronics
* SPDX-License-Identifier: BSD-3-Clause
******************************************************************************
*
* Copyright (c) 2016-2021 STMicroelectronics.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
******************************************************************************
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*******************************************************************************
* Automatically generated from STM32CubeMX/db/mcu/STM32L475V(C-E-G)Tx.xml
*/

//==============================================================================
Expand All @@ -52,6 +39,94 @@
#include "PinNamesTypes.h"
#include <mstd_cstddef>

//*** GPIO ***

MSTD_CONSTEXPR_OBJ_11 PinMap PinMap_GPIO[] = {
{PA_0, 0, GPIO_NOPULL}, // Connected to ARD_D1 [UART4_TX]
{PA_1, 0, GPIO_NOPULL}, // Connected to ARD_D0 [UART4_RX]
{PA_2, 0, GPIO_NOPULL}, // Connected to ARD_D10 [SPI_SSN]
{PA_3, 0, GPIO_NOPULL}, // Connected to ARD_D4
{PA_4, 0, GPIO_NOPULL}, // Connected to ARD_D7
{PA_5, 0, GPIO_NOPULL}, // Connected to ARD_D13 [SPI1_SCK]
{PA_6, 0, GPIO_NOPULL}, // Connected to ARD_D12 [SPI1_MISO]
{PA_7, 0, GPIO_NOPULL}, // Connected to ARD_D11 [SPI1_MOSI]
{PA_8, 0, GPIO_NOPULL}, // Connected to SPBTLE_RF_RST
{PA_9, 0, GPIO_NOPULL}, // Connected to USB_OTG_FS_VBUS [STMPS2141STR_OUT]
{PA_10, 0, GPIO_NOPULL}, // Connected to USB_OTG_FS_ID
{PA_11, 0, GPIO_NOPULL}, // Connected to USB_OTG_FS_DM
{PA_12, 0, GPIO_NOPULL}, // Connected to USB_OTG_FS_DP
{PA_13, 0, GPIO_NOPULL}, // PA13 (JTMS-SWDIO)
{PA_14, 0, GPIO_NOPULL}, // PA14 (JTCK-SWCLK)
{PA_15, 0, GPIO_NOPULL},
{PB_0, 0, GPIO_NOPULL}, // Connected to ARD_D3 [INT_EXT10]
{PB_1, 0, GPIO_NOPULL}, // Connected to ARD_D6 [ADC1_IN6]
{PB_2, 0, GPIO_NOPULL}, // Connected to ARD_D8
{PB_3, 0, GPIO_NOPULL}, // PB3 (JTDO-TRACESWO)
{PB_4, 0, GPIO_NOPULL},
{PB_5, 0, GPIO_NOPULL}, // Connected to SPSGRF_915_SPI3_CSN [SPSGRF_SPI_CS]
// {PB_6, 0, GPIO_NOPULL}, // Connected to STDIO_UART_TX
// {PB_7, 0, GPIO_NOPULL}, // Connected to STDIO_UART_RX
{PB_8, 0, GPIO_PULLUP}, // Connected to ARD_D15 [I2C1_SCL] // HW pull-up
{PB_9, 0, GPIO_PULLUP}, // Connected to ARD_D14 [I2C1_SDA] // HW pull-up
{PB_10, 0, GPIO_PULLUP}, // Connected to INTERNAL_I2C2_SCL [VL53L0X_SCL] // HW pull-up
{PB_11, 0, GPIO_PULLUP}, // Connected to INTERNAL_I2C2_SDA [VL53L0X_SDA] // HW pull-up
{PB_12, 0, GPIO_NOPULL}, // Connected to ISM43362_BOOT0 [ISM43362_BOOT]
{PB_13, 0, GPIO_NOPULL}, // Connected to ISM43362_WAKEUP [ISM43362_WKUP]
{PB_14, 0, GPIO_NOPULL}, // Connected to LED2 [LED_GREEN]
{PB_15, 0, GPIO_NOPULL}, // Connected to SPSGRF_915_SDN [SPSGRF_SDN]
{PC_0, 0, GPIO_NOPULL}, // Connected to ARD_A5 [ADC]
{PC_1, 0, GPIO_NOPULL}, // Connected to ARD_A4 [ADC]
{PC_2, 0, GPIO_NOPULL}, // Connected to ARD_A3 [ADC]
{PC_3, 0, GPIO_NOPULL}, // Connected to ARD_A2 [ADC]
{PC_4, 0, GPIO_NOPULL}, // Connected to ARD_A1 [ADC]
{PC_5, 0, GPIO_NOPULL}, // Connected to ARD_A0 [ADC]
{PC_6, 0, GPIO_NOPULL}, // Connected to VL53L0X_XSHUT [Read_XSHUT]
{PC_7, 0, GPIO_NOPULL}, // Connected to VL53L0X_GPIO1_EXTI7 [VL53L0X_GPIO1]
{PC_8, 0, GPIO_NOPULL}, // Connected to LSM3MDL_DRDY_EXTI8 [LIS3MDL_DRDY]
{PC_9, 0, GPIO_NOPULL}, // Connected to LED3_WIFI_ LED4_BLE
{PC_10, 0, GPIO_NOPULL}, // Connected to INTERNAL_SPI3_SCK [BT module_SPI_SCLK] [ISM43362_SCK]
{PC_11, 0, GPIO_NOPULL}, // Connected to INTERNAL_SPI3_MISO [BT module_SPI_MISO] [ISM43362_MISO]
{PC_12, 0, GPIO_NOPULL}, // Connected to INTERNAL_SPI3_MOSI [BT module_SPI_MOSI] [ISM43362_MOSI]
{PC_13, 0, GPIO_NOPULL}, // Connected to BUTTON_EXTI13 [B2]
// {PC_14, 0, GPIO_NOPULL}, // PC14-OSC32_IN (PC14)
// {PC_15, 0, GPIO_NOPULL}, // PC15-OSC32_OUT (PC15)
{PD_0, 0, GPIO_NOPULL}, // Connected to PMOD_RESET
{PD_1, 0, GPIO_NOPULL}, // Connected to PMOD_SPI2_SCK
{PD_2, 0, GPIO_NOPULL}, // Connected to PMOD_IRQ_EXTI12
{PD_3, 0, GPIO_NOPULL}, // Connected to PMOD_UART2_CTS
{PD_4, 0, GPIO_NOPULL}, // Connected to PMOD_UART2_RTS
{PD_5, 0, GPIO_NOPULL}, // Connected to PMOD_UART2_TX
{PD_6, 0, GPIO_NOPULL}, // Connected to PMOD_UART2_RX
{PD_7, 0, GPIO_NOPULL}, // Connected to STSAFE_A100_RESET [STSAFE-A100_RESET]
{PD_8, 0, GPIO_NOPULL}, // Connected to INTERNAL_UART3_TX [ISM43362_RX]
{PD_9, 0, GPIO_NOPULL}, // Connected to INTERNAL_UART3_RX [ISM43362_TX]
{PD_10, 0, GPIO_NOPULL}, // Connected to LPS22HB_INT_DRDY_EXTI0 [LPS22HB_INT_DRDY]
{PD_11, 0, GPIO_NOPULL}, // Connected to LSM6DSL_INT1_EXTI11 [LSM6DSL_INT1]
{PD_12, 0, GPIO_NOPULL}, // Connected to USB_OTG_FS_PWR_EN [STMPS2141STR_EN]
{PD_13, 0, GPIO_NOPULL}, // Connected to SPBTLE_RF_SPI3_CSN [BT module_SPI_CS]
{PD_14, 0, GPIO_NOPULL}, // Connected to ARD_D2 [INT0_EXTI14]
{PD_15, 0, GPIO_NOPULL}, // Connected to HTS221_DRDY_EXTI15 [HTS221_DRDY]
{PE_0, 0, GPIO_NOPULL}, // Connected to ISM43362_SPI3_CSN [ISM43362_SSN]
{PE_1, 0, GPIO_NOPULL}, // Connected to ISM43362_DRDY_EXTI1 [ISM43362_DATARDY]
{PE_2, 0, GPIO_NOPULL}, // Connected to M24SR64_Y_RF_DISABLE [M24SR64_RFDIS]
{PE_3, 0, GPIO_NOPULL}, // Connected to USB_OTG_FS_OVRCR_EXTI3 [STMPS2141STR_FAULT]
{PE_4, 0, GPIO_NOPULL}, // Connected to M24SR64_Y_GPO [M24SR64_GPO]
{PE_5, 0, GPIO_NOPULL}, // Connected to SPSGRF_915_GPIO3_EXTI5 [SPSGRF_GPIO_3]
{PE_6, 0, GPIO_NOPULL}, // Connected to SPBTLE_RF_IRQ_EXTI6 [BT module_SPI_IRQ]
{PE_7, 0, GPIO_NOPULL}, // Connected to DFSDM1_DATIN2 [MP34DT01_DOUT]
{PE_8, 0, GPIO_NOPULL}, // Connected to ISM43362_RST [ISM43362_RSTN]
{PE_9, 0, GPIO_NOPULL}, // Connected to DFSDM1_CKOUT [MP34DT01_CLK]
{PE_10, 0, GPIO_NOPULL}, // Connected to QUADSPI_CLK [MX25R6435F_SCLK]
{PE_11, 0, GPIO_NOPULL}, // Connected to QUADSPI_NCS [MX25R6435F_SCLK]
{PE_12, 0, GPIO_NOPULL}, // Connected to OQUADSPI_BK1_IO0 [MX25R6435F_IO0]
{PE_13, 0, GPIO_NOPULL}, // Connected to QUADSPI_BK1_IO1 [MX25R6435F_IO1]
{PE_14, 0, GPIO_NOPULL}, // Connected to QUAD_SPI_BK1_IO2 [MX25R6435F_IO2]
{PE_15, 0, GPIO_NOPULL}, // Connected to QUAD_SPI_BK1_IO3 [MX25R6435F_IO3]
// {PH_0, 0, GPIO_NOPULL}, // PH0-OSC_IN (PH0)
// {PH_1, 0, GPIO_NOPULL}, // PH1-OSC_OUT (PH1)
{NC, NC, 0}
};

//*** ADC ***

MSTD_CONSTEXPR_OBJ_11 PinMap PinMap_ADC[] = {
Expand Down Expand Up @@ -383,7 +458,7 @@ MSTD_CONSTEXPR_OBJ_11 PinMap PinMap_QSPI_SSEL[] = {

//*** USBDEVICE ***

MSTD_CONSTEXPR_OBJ_11 const PinMap PinMap_USB_FS[] = {
MSTD_CONSTEXPR_OBJ_11 PinMap PinMap_USB_FS[] = {
// {PA_8, USB_FS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_FS)}, // USB_OTG_FS_SOF // Connected to SPBTLE_RF_RST
{PA_9, USB_FS, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, GPIO_AF_NONE)}, // USB_OTG_FS_VBUS // Connected to USB_OTG_FS_VBUS [STMPS2141STR_OUT]
{PA_10, USB_FS, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_PULLUP, GPIO_AF10_OTG_FS)}, // USB_OTG_FS_ID // Connected to USB_OTG_FS_ID
Expand Down
20 changes: 0 additions & 20 deletions .../TARGET_STM/TARGET_STM32L4/TARGET_STM32L475xG/TARGET_DISCO_L475VG_IOT01A/PeripheralPins.c
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -31,23 +31,3 @@
#include "PeripheralPins.h"
#include "mbed_toolchain.h"
#include "PeripheralPinMaps.h"

// List of GPIOs with limited functionality
const PinList *pinmap_gpio_restricted_pins()
{
static const PinName pins[] = {
PB_8, // fixed pull-up (for I2C)
PB_9, // fixed pull-up (for I2C)
PB_10, // fixed pull-up (for I2C)
PB_11, // fixed pull-up (for I2C)
RCC_OSC32_IN, // OSC32_IN
RCC_OSC32_OUT, // OSC32_OUT
RCC_OSC_IN, // OSC_IN
RCC_OSC_OUT // OSC_OUT
};
static const PinList pin_list = {
sizeof(pins) / sizeof(pins[0]),
pins
};
return &pin_list;
}
3 changes: 3 additions & 0 deletions targets/TARGET_STM/TARGET_STM32L4/TARGET_STM32L475xG/TARGET_DISCO_L475VG_IOT01A/PinNames.h
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -30,6 +30,9 @@ extern "C" {
/* If this macro is defined, then constexpr utility functions for pin-map seach can be used. */
#define STATIC_PINMAP_READY 1

/* If this macro is defined, then PinMap_GPIO is present in PeripheralPins.c */
#define GPIO_PINMAP_READY 1

typedef enum {
ALT0 = 0x100,
ALT1 = 0x200,
Expand Down
108 changes: 74 additions & 34 deletions targets/TARGET_STM/TARGET_STM32WB/TARGET_STM32WB55xx/TARGET_NUCLEO_WB55RG/PeripheralPins.c
View file
Open in desktop
Original file line number Diff line number Diff line change
@@ -1,34 +1,18 @@
/* mbed Microcontroller Library
*******************************************************************************
* Copyright (c) 2019, STMicroelectronics
* SPDX-License-Identifier: Apache-2.0
* All rights reserved.
* SPDX-License-Identifier: BSD-3-Clause
******************************************************************************
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
* Copyright (c) 2016-2021 STMicroelectronics.
* All rights reserved.
*
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*******************************************************************************
******************************************************************************
*
* Automatically generated from STM32WB55RGVx.xml
* Automatically generated from STM32CubeMX/db/mcu/STM32WB55RGVx.xml
*/

#include "PeripheralPins.h"
Expand All @@ -53,6 +37,61 @@
//==============================================================================


//*** GPIO ***

MBED_WEAK const PinMap PinMap_GPIO[] = {
{PA_0, 0, GPIO_NOPULL},
{PA_1, 0, GPIO_NOPULL},
{PA_2, 0, GPIO_NOPULL},
{PA_3, 0, GPIO_NOPULL},
{PA_4, 0, GPIO_NOPULL},
{PA_5, 0, GPIO_NOPULL},
{PA_6, 0, GPIO_NOPULL},
{PA_7, 0, GPIO_NOPULL},
{PA_8, 0, GPIO_NOPULL},
{PA_9, 0, GPIO_NOPULL},
{PA_10, 0, GPIO_NOPULL},
{PA_11, 0, GPIO_NOPULL}, // Connected to USB_DM
{PA_12, 0, GPIO_NOPULL}, // Connected to USB_DP
{PA_13, 0, GPIO_NOPULL}, // Connected to JTMS
{PA_14, 0, GPIO_NOPULL}, // Connected to JTCK
{PA_15, 0, GPIO_NOPULL},
{PB_0, 0, GPIO_NOPULL}, // Connected to LD2 [Green Led]
{PB_1, 0, GPIO_NOPULL}, // Connected to LD3 [Red Led]
{PB_2, 0, GPIO_NOPULL},
{PB_3, 0, GPIO_NOPULL}, // Connected to JTDO
{PB_4, 0, GPIO_NOPULL},
{PB_5, 0, GPIO_NOPULL}, // Connected to LD1 [Blue Led]
// {PB_6, 0, GPIO_NOPULL}, // Connected to STDIO_UART_TX
// {PB_7, 0, GPIO_NOPULL}, // Connected to STDIO_UART_RX
{PB_8, 0, GPIO_NOPULL},
{PB_9, 0, GPIO_NOPULL},
{PB_10, 0, GPIO_NOPULL},
{PB_11, 0, GPIO_NOPULL},
{PB_12, 0, GPIO_NOPULL},
{PB_13, 0, GPIO_NOPULL},
{PB_14, 0, GPIO_NOPULL},
{PB_15, 0, GPIO_NOPULL},
{PC_0, 0, GPIO_NOPULL},
{PC_1, 0, GPIO_NOPULL},
{PC_2, 0, GPIO_NOPULL},
{PC_3, 0, GPIO_NOPULL},
{PC_4, 0, GPIO_NOPULL}, // Connected to B1 [Push Button]
{PC_5, 0, GPIO_NOPULL},
{PC_6, 0, GPIO_NOPULL},
{PC_10, 0, GPIO_NOPULL},
{PC_11, 0, GPIO_NOPULL},
{PC_12, 0, GPIO_NOPULL},
{PC_13, 0, GPIO_NOPULL}, // Connected to SYS_WKUP2
// {PC_14, 0, GPIO_NOPULL}, // Connected to RCC_OSC32_IN // PC14-OSC32_IN
// {PC_15, 0, GPIO_NOPULL}, // Connected to RCC_OSC32_OUT // PC15-OSC32_OUT
{PD_0, 0, GPIO_NOPULL}, // Connected to B2 [Push Button]
{PD_1, 0, GPIO_NOPULL}, // Connected to B3 [Push Button]
{PE_4, 0, GPIO_NOPULL},
{PH_3, 0, GPIO_NOPULL}, // PH3-BOOT0
{NC, NC, 0}
};

//*** ADC ***

MBED_WEAK const PinMap PinMap_ADC[] = {
Expand Down Expand Up @@ -109,6 +148,7 @@ MBED_WEAK const PinMap PinMap_I2C_SCL[] = {
//*** PWM ***

// TIM16 cannot be used because already used by the us_ticker
// (update us_ticker_data.h file if another timer is chosen)
MBED_WEAK const PinMap PinMap_PWM[] = {
{PA_0, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
{PA_1, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2
Expand Down Expand Up @@ -142,36 +182,36 @@ MBED_WEAK const PinMap PinMap_PWM[] = {

MBED_WEAK const PinMap PinMap_UART_TX[] = {
{PA_2, LPUART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_LPUART1)},
{PA_9, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
{PA_9, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
{PB_5, LPUART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_LPUART1)}, // Connected to LD1 [Blue Led]
{PB_6, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, // Connected to STDIO_UART_TX
{PB_6, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, // Connected to STDIO_UART_TX
{PB_11, LPUART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_LPUART1)},
{PC_1, LPUART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_LPUART1)},
{NC, NC, 0}
};

MBED_WEAK const PinMap PinMap_UART_RX[] = {
{PA_3, LPUART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_LPUART1)},
{PA_10, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
{PA_10, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
{PA_12, LPUART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_LPUART1)}, // Connected to USB_DP
{PB_7, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, // Connected to STDIO_UART_RX
{PB_7, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, // Connected to STDIO_UART_RX
{PB_10, LPUART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_LPUART1)},
{PC_0, LPUART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_LPUART1)},
{NC, NC, 0}
};

MBED_WEAK const PinMap PinMap_UART_RTS[] = {
{PA_12, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, // Connected to USB_DP
{PA_12, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, // Connected to USB_DP
{PB_1, LPUART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_LPUART1)}, // Connected to LD3 [Red Led]
{PB_3, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, // Connected to JTDO
{PB_3, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, // Connected to JTDO
{PB_12, LPUART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_LPUART1)},
{NC, NC, 0}
};

MBED_WEAK const PinMap PinMap_UART_CTS[] = {
{PA_6, LPUART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_LPUART1)},
{PA_11, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, // Connected to USB_DM
{PB_4, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
{PA_11, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, // Connected to USB_DM
{PB_4, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
{PB_13, LPUART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_LPUART1)},
{NC, NC, 0}
};
Expand Down
4 changes: 4 additions & 0 deletions targets/TARGET_STM/TARGET_STM32WB/TARGET_STM32WB55xx/TARGET_NUCLEO_WB55RG/PinNames.h
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -23,6 +23,9 @@
#include "cmsis.h"
#include "PinNamesTypes.h"

/* If this macro is defined, then PinMap_GPIO is present in PeripheralPins.c */
#define GPIO_PINMAP_READY 1

#ifdef __cplusplus
extern "C" {
#endif
Expand All @@ -32,6 +35,7 @@ typedef enum {
} ALTx;

typedef enum {

PA_0 = 0x00,
PA_1 = 0x01,
PA_2 = 0x02,
Expand Down
Loading