Add lpc821 cocorico target

hal/targets.json

@@ -407,6 +407,21 @@
             }
         }
     },
+    "ELEKTOR_COCORICO": {
+        "core": "Cortex-M0",
+        "default_toolchain": "uARM",
+        "extra_labels": ["NXP", "LPC81X"],
+        "supported_toolchains": ["uARM", "GCC_ARM", "IAR"],
+        "inherits": ["LPCTarget"],
+        "is_disk_virtual": true,
+        "detect_code": ["C000"],
+        "progen": {
+            "target": "cocorico",
+            "uvision": {
+                "template": ["uvision_microlib.uvproj.tmpl"]
+            }
+        }
+    },
     "KL05Z": {
         "supported_form_factors": ["ARDUINO"],
         "core": "Cortex-M0+",

hal/targets/hal/TARGET_NXP/TARGET_LPC81X/TARGET_ELEKTOR_COCORICO/PeripheralNames.h

@@ -0,0 +1,37 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_PERIPHERALNAMES_H
+#define MBED_PERIPHERALNAMES_H
+
+#include "cmsis.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+// Default peripherals
+#define MBED_SPI0         P0_14, P0_15, P0_12, P0_13 
+
+#define MBED_UART0        P0_4, P0_0
+#define MBED_UARTUSB      USBTX, USBRX
+
+#define MBED_I2C0         P0_10, P0_11
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif

hal/targets/hal/TARGET_NXP/TARGET_LPC81X/TARGET_ELEKTOR_COCORICO/PinNames.h

@@ -0,0 +1,108 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_PINNAMES_H
+#define MBED_PINNAMES_H
+
+#include "cmsis.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+    PIN_INPUT,
+    PIN_OUTPUT
+} PinDirection;
+
+typedef enum {
+    P0_0 = 0,
+    P0_1 = 1,
+    P0_2 = 2,
+    P0_3 = 3,
+    P0_4 = 4,
+    P0_5 = 5,
+    P0_6 = 6,
+    P0_7 = 7,
+    P0_8 = 8,
+    P0_9 = 9,
+    P0_10 = 10,
+    P0_11 = 11,
+    P0_12 = 12,
+    P0_13 = 13,
+    P0_14 = 14,
+    P0_15 = 15,
+    P0_16 = 16,
+    P0_17 = 17,
+
+    D0 = P0_0,
+    D1 = P0_4,
+    D2 = P0_6,
+    D3 = P0_8,
+    D4 = P0_9,
+
+    D7 = P0_7,
+    D8 = P0_17,
+    D9 = P0_16,
+    D10 = P0_13,
+    D11 = P0_14,
+    D12 = P0_15,
+    D13 = P0_12,
+    D14 = P0_10,
+    D15 = P0_11,
+
+    A4 = P0_10,
+    A5 = P0_11,
+
+    // Elektor CoCO-ri-Co board
+    LED_RED = P0_11,
+    LED_GREEN = P0_10,
+
+    // mbed original LED naming
+    LED1 = LED_RED,
+    LED2 = LED_GREEN,
+    LED3 = LED_RED,
+    LED4 = LED_GREEN,
+
+    // Serial to USB pins
+    USBTX = P0_6,
+    USBRX = P0_1,
+
+    // Not connected
+    NC = (int)0xFFFFFFFF,
+} PinName;
+
+typedef enum {
+    PullUp = 2,
+    PullDown = 1,
+    PullNone = 0,
+    Repeater = 3,
+    OpenDrain = 4,
+    PullDefault = PullDown
+} PinMode;
+
+#define STDIO_UART_TX     USBTX
+#define STDIO_UART_RX     USBRX
+
+typedef struct {
+    unsigned char n;
+    unsigned char offset;
+} SWM_Map;
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif