NUCLEO_F412ZG - Add new platform

targets/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F412ZG/PeripheralNames.h

@@ -0,0 +1,79 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2016 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_PERIPHERALNAMES_H
+#define MBED_PERIPHERALNAMES_H
+
+#include "cmsis.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+    ADC_1 = (int)ADC1_BASE
+} ADCName;
+
+typedef enum {
+    UART_1 = (int)USART1_BASE,
+    UART_2 = (int)USART2_BASE,
+    UART_3 = (int)USART3_BASE,
+    UART_6 = (int)USART6_BASE
+} UARTName;
+
+#define STDIO_UART_TX  PD_8
+#define STDIO_UART_RX  PD_9
+#define STDIO_UART     UART_3
+
+typedef enum {
+    SPI_1 = (int)SPI1_BASE,
+    SPI_2 = (int)SPI2_BASE,
+    SPI_3 = (int)SPI3_BASE,
+    SPI_4 = (int)SPI4_BASE,
+    SPI_5 = (int)SPI5_BASE
+} SPIName;
+
+typedef enum {
+    I2C_1 = (int)I2C1_BASE,
+    I2C_2 = (int)I2C2_BASE,
+    I2C_3 = (int)I2C3_BASE,
+    FMPI2C_1 = (int)FMPI2C1_BASE
+} I2CName;
+
+typedef enum {
+    PWM_1  = (int)TIM1_BASE,
+    PWM_2  = (int)TIM2_BASE,
+    PWM_3  = (int)TIM3_BASE,
+    PWM_4  = (int)TIM4_BASE,
+    PWM_5  = (int)TIM5_BASE,
+    PWM_8  = (int)TIM8_BASE,
+    PWM_9  = (int)TIM9_BASE,
+    PWM_10 = (int)TIM10_BASE,
+    PWM_11 = (int)TIM11_BASE,
+    PWM_12 = (int)TIM12_BASE,
+    PWM_13 = (int)TIM13_BASE,
+    PWM_14 = (int)TIM14_BASE
+} PWMName;
+
+typedef enum {
+    CAN_1 = (int)CAN1_BASE,
+    CAN_2 = (int)CAN2_BASE
+} CANName;
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif

targets/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F412ZG/PinNames.h

@@ -0,0 +1,252 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2016 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_PINNAMES_H
+#define MBED_PINNAMES_H
+
+#include "cmsis.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#define STM_PIN_DATA(MODE, PUPD, AFNUM)  ((int)(((MODE  & 0x0F) << 0) |\
+                                                ((PUPD  & 0x07) << 4) |\
+                                                ((AFNUM & 0x0F) << 7)))
+
+#define STM_PIN_DATA_EXT(MODE, PUPD, AFNUM, CHANNEL, INVERTED)  ((int)(((MODE     & 0x0F) <<  0) |\
+                                                                       ((PUPD     & 0x07) <<  4) |\
+                                                                       ((AFNUM    & 0x0F) <<  7) |\
+                                                                       ((CHANNEL  & 0x1F) << 11) |\
+                                                                       ((INVERTED & 0x01) << 16)))
+
+#define STM_PIN_MODE(X)     (((X) >>  0) & 0x0F)
+#define STM_PIN_PUPD(X)     (((X) >>  4) & 0x07)
+#define STM_PIN_AFNUM(X)    (((X) >>  7) & 0x0F)
+#define STM_PIN_CHANNEL(X)  (((X) >> 11) & 0x1F)
+#define STM_PIN_INVERTED(X) (((X) >> 16) & 0x01)
+
+#define STM_MODE_INPUT              (0)
+#define STM_MODE_OUTPUT_PP          (1)
+#define STM_MODE_OUTPUT_OD          (2)
+#define STM_MODE_AF_PP              (3)
+#define STM_MODE_AF_OD              (4)
+#define STM_MODE_ANALOG             (5)
+#define STM_MODE_IT_RISING          (6)
+#define STM_MODE_IT_FALLING         (7)
+#define STM_MODE_IT_RISING_FALLING  (8)
+#define STM_MODE_EVT_RISING         (9)
+#define STM_MODE_EVT_FALLING        (10)
+#define STM_MODE_EVT_RISING_FALLING (11)
+#define STM_MODE_IT_EVT_RESET       (12)
+
+// High nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, 6=G, 7=H)
+// Low nibble  = pin number
+#define STM_PORT(X) (((uint32_t)(X) >> 4) & 0xF)
+#define STM_PIN(X)  ((uint32_t)(X) & 0xF)
+
+typedef enum {
+    PIN_INPUT,
+    PIN_OUTPUT
+} PinDirection;
+
+typedef enum {
+    PA_0  = 0x00,
+    PA_1  = 0x01,
+    PA_2  = 0x02,
+    PA_3  = 0x03,
+    PA_4  = 0x04,
+    PA_5  = 0x05,
+    PA_6  = 0x06,
+    PA_7  = 0x07,
+    PA_8  = 0x08,
+    PA_9  = 0x09,
+    PA_10 = 0x0A,
+    PA_11 = 0x0B,
+    PA_12 = 0x0C,
+    PA_13 = 0x0D,
+    PA_14 = 0x0E,
+    PA_15 = 0x0F,
+
+    PB_0  = 0x10,
+    PB_1  = 0x11,
+    PB_2  = 0x12,
+    PB_3  = 0x13,
+    PB_4  = 0x14,
+    PB_5  = 0x15,
+    PB_6  = 0x16,
+    PB_7  = 0x17,
+    PB_8  = 0x18,
+    PB_9  = 0x19,
+    PB_10 = 0x1A,
+    PB_11 = 0x1B,
+    PB_12 = 0x1C,
+    PB_13 = 0x1D,
+    PB_14 = 0x1E,
+    PB_15 = 0x1F,
+
+    PC_0  = 0x20,
+    PC_1  = 0x21,
+    PC_2  = 0x22,
+    PC_3  = 0x23,
+    PC_4  = 0x24,
+    PC_5  = 0x25,
+    PC_6  = 0x26,
+    PC_7  = 0x27,
+    PC_8  = 0x28,
+    PC_9  = 0x29,
+    PC_10 = 0x2A,
+    PC_11 = 0x2B,
+    PC_12 = 0x2C,
+    PC_13 = 0x2D,
+    PC_14 = 0x2E,
+    PC_15 = 0x2F,
+
+    PD_0  = 0x30,
+    PD_1  = 0x31,
+    PD_2  = 0x32,
+    PD_3  = 0x33,
+    PD_4  = 0x34,
+    PD_5  = 0x35,
+    PD_6  = 0x36,
+    PD_7  = 0x37,
+    PD_8  = 0x38,
+    PD_9  = 0x39,
+    PD_10 = 0x3A,
+    PD_11 = 0x3B,
+    PD_12 = 0x3C,
+    PD_13 = 0x3D,
+    PD_14 = 0x3E,
+    PD_15 = 0x3F,
+
+    PE_0  = 0x40,
+    PE_1  = 0x41,
+    PE_2  = 0x42,
+    PE_3  = 0x43,
+    PE_4  = 0x44,
+    PE_5  = 0x45,
+    PE_6  = 0x46,
+    PE_7  = 0x47,
+    PE_8  = 0x48,
+    PE_9  = 0x49,
+    PE_10 = 0x4A,
+    PE_11 = 0x4B,
+    PE_12 = 0x4C,
+    PE_13 = 0x4D,
+    PE_14 = 0x4E,
+    PE_15 = 0x4F,
+
+    PF_0  = 0x50,
+    PF_1  = 0x51,
+    PF_2  = 0x52,
+    PF_3  = 0x53,
+    PF_4  = 0x54,
+    PF_5  = 0x55,
+    PF_6  = 0x56,
+    PF_7  = 0x57,
+    PF_8  = 0x58,
+    PF_9  = 0x59,
+    PF_10 = 0x5A,
+    PF_11 = 0x5B,
+    PF_12 = 0x5C,
+    PF_13 = 0x5D,
+    PF_14 = 0x5E,
+    PF_15 = 0x5F,
+
+    PG_0  = 0x60,
+    PG_1  = 0x61,
+    PG_2  = 0x62,
+    PG_3  = 0x63,
+    PG_4  = 0x64,
+    PG_5  = 0x65,
+    PG_6  = 0x66,
+    PG_7  = 0x67,
+    PG_8  = 0x68,
+    PG_9  = 0x69,
+    PG_10 = 0x6A,
+    PG_11 = 0x6B,
+    PG_12 = 0x6C,
+    PG_13 = 0x6D,
+    PG_14 = 0x6E,
+    PG_15 = 0x6F,
+
+    PH_0  = 0x70,
+    PH_1  = 0x71,
+
+    // ADC internal channels
+    ADC_TEMP = 0xF0,
+    ADC_VREF = 0xF1,
+    ADC_VBAT = 0xF2,
+
+    // Arduino connector namings
+    A0          = PA_3,
+    A1          = PC_0,
+    A2          = PC_3,
+    A3          = PC_1,
+    A4          = PC_4,
+    A5          = PC_5,
+    D0          = PG_9,
+    D1          = PG_14,
+    D2          = PF_15,
+    D3          = PE_13,
+    D4          = PF_14,
+    D5          = PE_11,
+    D6          = PE_9,
+    D7          = PF_13,
+    D8          = PF_12,
+    D9          = PD_15,
+    D10         = PD_14,
+    D11         = PA_7,
+    D12         = PA_6,
+    D13         = PA_5,
+    D14         = PB_9,
+    D15         = PB_8,
+
+    // Generic signals namings
+    LED1        = PB_0,
+    LED2        = PB_7,
+    LED3        = PB_14,
+    LED4        = LED1,
+    LED_RED     = LED1,
+    USER_BUTTON = PC_13,
+    SERIAL_TX   = PD_8,
+    SERIAL_RX   = PD_9,
+    USBTX       = SERIAL_TX,
+    USBRX       = SERIAL_RX,
+    I2C_SCL     = D15,
+    I2C_SDA     = D14,
+    SPI_MOSI    = D11,
+    SPI_MISO    = D12,
+    SPI_SCK     = D13,
+    SPI_CS      = D10,
+    PWM_OUT     = D9,
+
+    // Not connected
+    NC = (int)0xFFFFFFFF
+} PinName;
+
+typedef enum {
+    PullNone  = 0,
+    PullUp    = 1,
+    PullDown  = 2,
+    OpenDrain = 3,
+    PullDefault = PullNone
+} PinMode;
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif

targets/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F412ZG/PortNames.h

@@ -0,0 +1,37 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2016 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_PORTNAMES_H
+#define MBED_PORTNAMES_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+    PortA = 0,
+    PortB = 1,
+    PortC = 2,
+    PortD = 3,
+    PortE = 4,
+    PortF = 5,
+    PortG = 6,
+    PortH = 7
+} PortName;
+
+#ifdef __cplusplus
+}
+#endif
+#endif