[STM32L4] Modify folder structure

targets/TARGET_STM/TARGET_STM32L4/TARGET_L476_L486/device/TOOLCHAIN_IAR/stm32l476xx.icf → targets/TARGET_STM/TARGET_STM32L4/TARGET_STM32L476xG/device/TOOLCHAIN_IAR/stm32l476xx.icf

@@ -19,8 +19,8 @@ define region SRAM2_region = mem:[from __region_SRAM2_start__ to __region_SRAM2_
 define region SRAM1_region = mem:[from __region_SRAM1_start__ to __region_SRAM1_end__];
 
 /* Stack 1/8 and Heap 1/4 of RAM */
-define symbol __size_cstack__ = 0x4000;
-define symbol __size_heap__   = 0x8000;
+define symbol __size_cstack__ = 0x8000;
+define symbol __size_heap__   = 0xa000;
 define block CSTACK    with alignment = 8, size = __size_cstack__   { };
 define block HEAP      with alignment = 8, size = __size_heap__     { };
 define block STACKHEAP with fixed order { block HEAP, block CSTACK };

targets/TARGET_STM/TARGET_STM32L4/TARGET_STM32L486xG/TARGET_NUCLEO_L486RG/PeripheralNames.h

@@ -0,0 +1,94 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2015, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#ifndef MBED_PERIPHERALNAMES_H
+#define MBED_PERIPHERALNAMES_H
+
+#include "cmsis.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+    ADC_1 = (int)ADC1_BASE,
+    ADC_2 = (int)ADC2_BASE,
+    ADC_3 = (int)ADC3_BASE
+} ADCName;
+
+typedef enum {
+    DAC_1 = (int)DAC_BASE
+} DACName;
+
+typedef enum {
+    UART_1 = (int)USART1_BASE,
+    UART_2 = (int)USART2_BASE,
+    UART_3 = (int)USART3_BASE,
+    UART_4 = (int)UART4_BASE,
+    UART_5 = (int)UART5_BASE,
+    LPUART_1 = (int)LPUART1_BASE
+} UARTName;
+
+#define STDIO_UART_TX  PA_2
+#define STDIO_UART_RX  PA_3
+#define STDIO_UART     UART_2
+
+typedef enum {
+    SPI_1 = (int)SPI1_BASE,
+    SPI_2 = (int)SPI2_BASE,
+    SPI_3 = (int)SPI3_BASE
+} SPIName;
+
+typedef enum {
+    I2C_1 = (int)I2C1_BASE,
+    I2C_2 = (int)I2C2_BASE,
+    I2C_3 = (int)I2C3_BASE
+} I2CName;
+
+typedef enum {
+    PWM_1  = (int)TIM1_BASE,
+    PWM_2  = (int)TIM2_BASE,
+    PWM_3  = (int)TIM3_BASE,
+    PWM_4  = (int)TIM4_BASE,
+    PWM_5  = (int)TIM5_BASE,
+    PWM_8  = (int)TIM8_BASE,
+    PWM_15 = (int)TIM15_BASE,
+    PWM_16 = (int)TIM16_BASE,
+    PWM_17 = (int)TIM17_BASE
+} PWMName;
+
+typedef enum {
+    CAN_1 = (int)CAN1_BASE
+} CANName;
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif