NUCLEO_L496ZG_P support

targets/TARGET_STM/TARGET_STM32L4/TARGET_STM32L496xG/TARGET_NUCLEO_L496ZG/PeripheralPins.c

@@ -258,8 +258,8 @@ const PinMap PinMap_UART_TX[] = {
     {PC_12,      UART_5,   STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART5)},
     {PD_5,       UART_2,   STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
     {PD_8,       UART_3,   STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)}, // ARDUINO D1
-    {PG_7,       LPUART_1,   STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_LPUART1)},
-    {PG_9,       UART_1,   STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, // Connected to STDIO_UART_TX
+    {PG_7,       LPUART_1,   STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_LPUART1)}, // Connected to STDIO_UART_TX
+    {PG_9,       UART_1,   STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
     {NC,    NC,    0}
 };
 

targets/TARGET_STM/TARGET_STM32L4/TARGET_STM32L496xG/TARGET_NUCLEO_L496ZG/PinNames.h

@@ -266,6 +266,15 @@ typedef enum {
     SPI_CS      = D10,
     PWM_OUT     = D9,
 
+    USB_OTG_FS_SOF = PA_8,
+    USB_OTG_FS_VBUS = PA_9,
+    USB_OTG_FS_ID = PA_10,
+    USB_OTG_FS_DM = PA_11,
+    USB_OTG_FS_DP = PA_12,
+    USB_OTG_FS_NOE_ALT = PA_13,
+    USB_OTG_FS_SOF_ALT = PA_14,
+    USB_OTG_FS_NOE = PC_9,
+
     // Not connected
     NC = (int)0xFFFFFFFF
 } PinName;

targets/TARGET_STM/TARGET_STM32L4/TARGET_STM32L496xG/TARGET_NUCLEO_L496ZG/system_clock.c

@@ -190,10 +190,10 @@ uint8_t SetSysClock_PLL_HSE(uint8_t bypass)
 
     // Select PLL clock as system clock source and configure the HCLK, PCLK1 and PCLK2 clocks dividers
     RCC_ClkInitStruct.ClockType      = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2);
-    RCC_ClkInitStruct.SYSCLKSource   = RCC_SYSCLKSOURCE_PLLCLK; // 80 MHz or 48 MHz
-    RCC_ClkInitStruct.AHBCLKDivider  = RCC_SYSCLK_DIV1;         // 80 MHz or 48 MHz
-    RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1;           // 80 MHz or 48 MHz
-    RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1;           // 80 MHz or 48 MHz
+    RCC_ClkInitStruct.SYSCLKSource   = RCC_SYSCLKSOURCE_PLLCLK; // 80 MHz
+    RCC_ClkInitStruct.AHBCLKDivider  = RCC_SYSCLK_DIV1;         // 80 MHz
+    RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1;           /* 80 MHz */
+    RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1;           // 80 MHz
     if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_4) != HAL_OK) {
         return 0; // FAIL
     }
@@ -217,6 +217,13 @@ uint8_t SetSysClock_PLL_HSE(uint8_t bypass)
     RCC_OscInitStruct.PLL.PLLState   = RCC_PLL_NONE; // No PLL update
     HAL_RCC_OscConfig(&RCC_OscInitStruct);
 
+    /* Select HSI as clock source for LPUART1 */
+    RCC_PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_LPUART1;
+    RCC_PeriphClkInit.Lpuart1ClockSelection = RCC_LPUART1CLKSOURCE_HSI;
+    if (HAL_RCCEx_PeriphCLKConfig(&RCC_PeriphClkInit) != HAL_OK) {
+        return 0; // FAIL
+    }
+
     // Output clock on MCO1 pin(PA8) for debugging purpose
 #if DEBUG_MCO == 2
     if (bypass == 0)
@@ -289,6 +296,13 @@ uint8_t SetSysClock_PLL_HSI(void)
     RCC_OscInitStruct.PLL.PLLState   = RCC_PLL_NONE; // No PLL update
     HAL_RCC_OscConfig(&RCC_OscInitStruct);
 
+    /* Select HSI as clock source for LPUART1 */
+    RCC_PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_LPUART1;
+    RCC_PeriphClkInit.Lpuart1ClockSelection = RCC_LPUART1CLKSOURCE_HSI;
+    if (HAL_RCCEx_PeriphCLKConfig(&RCC_PeriphClkInit) != HAL_OK) {
+        return 0; // FAIL
+    }
+
     // Output clock on MCO1 pin(PA8) for debugging purpose
 #if DEBUG_MCO == 3
     HAL_RCC_MCOConfig(RCC_MCO1, RCC_MCO1SOURCE_HSI, RCC_MCODIV_1); // 16 MHz
@@ -322,7 +336,6 @@ uint8_t SetSysClock_PLL_MSI(void)
     RCC_OscInitStruct.MSIState             = RCC_MSI_ON;
     RCC_OscInitStruct.HSEState             = RCC_HSE_OFF;
     RCC_OscInitStruct.HSIState             = RCC_HSI_OFF;
-
     RCC_OscInitStruct.MSICalibrationValue = RCC_MSICALIBRATION_DEFAULT;
     RCC_OscInitStruct.MSIClockRange       = RCC_MSIRANGE_11; /* 48 MHz */
     RCC_OscInitStruct.PLL.PLLState        = RCC_PLL_ON;
@@ -342,11 +355,6 @@ uint8_t SetSysClock_PLL_MSI(void)
     PeriphClkInitStruct.UsbClockSelection = RCC_USBCLKSOURCE_MSI; /* 48 MHz */
     HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct);
 
-    /* Select LSE as clock source for LPUART1 */
-    PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_LPUART1;
-    PeriphClkInitStruct.Lpuart1ClockSelection = RCC_LPUART1CLKSOURCE_LSE;
-    HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct);
-
     // Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2 clocks dividers
     RCC_ClkInitStruct.ClockType      = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2);
     RCC_ClkInitStruct.SYSCLKSource   = RCC_SYSCLKSOURCE_PLLCLK; /* 80 MHz */
@@ -357,6 +365,13 @@ uint8_t SetSysClock_PLL_MSI(void)
         return 0; // FAIL
     }
 
+    /* Select LSE as clock source for LPUART1 */
+    PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_LPUART1;
+    PeriphClkInitStruct.Lpuart1ClockSelection = RCC_LPUART1CLKSOURCE_LSE;
+    if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct) != HAL_OK) {
+        return 0; // FAIL
+    }
+
     // Output clock on MCO1 pin(PA8) for debugging purpose
 #if DEBUG_MCO == 4
     HAL_RCC_MCOConfig(RCC_MCO1, RCC_MCO1SOURCE_MSI, RCC_MCODIV_2); // 2 MHz

targets/targets.json

@@ -3396,6 +3396,10 @@
         "release_versions": ["2", "5"],
         "device_name": "STM32L496ZG"
     },
+    "NUCLEO_L496ZG_P": {
+        "inherits": ["NUCLEO_L496ZG"],
+        "detect_code": ["0828"]
+        },
     "VBLUNO52": {
         "supported_form_factors": ["ARDUINO"],
         "inherits": ["MCU_NRF52"],

tools/export/sw4stm32/__init__.py

@@ -259,6 +259,11 @@ class Sw4STM32(GNUARMEclipse):
             'name': 'NUCLEO-L496ZG',
             'mcuId': 'STM32L496ZGTx'
         },        
+        'NUCLEO_L496ZG_P':
+        {
+            'name': 'NUCLEO-L496ZG',
+            'mcuId': 'STM32L496ZGTx'
+        },
     }
 
     TARGETS = BOARDS.keys()