Skip to content

STM32 : set all PinMap structures as weak #5936

New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Merged
merged 1 commit into from
Jan 30, 2018
Merged

STM32 : set all PinMap structures as weak #5936

Show file tree
Hide file tree
Changes from all commits
Commits
Show all changes
1 commit
Select commit
File filter

Filter by extension

Filter by extension
Conversations
Failed to load comments.
Loading
Jump to
Jump to file
Failed to load files.
Loading
Diff view
Diff view
27 changes: 14 additions & 13 deletions targets/TARGET_STM/TARGET_STM32F0/TARGET_NUCLEO_F030R8/PeripheralPins.c
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -29,6 +29,7 @@
*/

#include "PeripheralPins.h"
#include "mbed_toolchain.h"

// =====
// Note: Commented lines are alternative possibilities which are not used per default.
Expand All @@ -38,7 +39,7 @@

//*** ADC ***

const PinMap PinMap_ADC[] = {
MBED_WEAK const PinMap PinMap_ADC[] = {
{PA_0, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 0, 0)}, // ADC_IN0
{PA_1, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC_IN1
// {PA_2, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC_IN2 - Connected to STDIO_UART_TX
Expand All @@ -58,7 +59,7 @@ const PinMap PinMap_ADC[] = {
{NC, NC, 0}
};

const PinMap PinMap_ADC_Internal[] = {
MBED_WEAK const PinMap PinMap_ADC_Internal[] = {
{ADC_TEMP, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 16, 0)}, // ADC_IN16
{ADC_VREF, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 17, 0)}, // ADC_IN17
// {ADC_VBAT, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 18, 0)}, // ADC_IN18 - Not present
Expand All @@ -67,14 +68,14 @@ const PinMap PinMap_ADC_Internal[] = {

//*** I2C ***

const PinMap PinMap_I2C_SDA[] = {
MBED_WEAK const PinMap PinMap_I2C_SDA[] = {
{PB_7, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)},
{PB_9, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)},
{PB_11, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C2)},
{NC, NC, 0}
};

const PinMap PinMap_I2C_SCL[] = {
MBED_WEAK const PinMap PinMap_I2C_SCL[] = {
{PB_6, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)},
{PB_8, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)},
{PB_10, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C2)},
Expand All @@ -84,7 +85,7 @@ const PinMap PinMap_I2C_SCL[] = {
//*** PWM ***

// TIM1 cannot be used because already used by the us_ticker
const PinMap PinMap_PWM[] = {
MBED_WEAK const PinMap PinMap_PWM[] = {
{PA_4, PWM_14, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF4_TIM14, 1, 0)}, // TIM14_CH1
{PA_6, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF1_TIM3, 1, 0)}, // TIM3_CH1
// {PA_6, PWM_16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_TIM16, 1, 0)}, // TIM16_CH1
Expand Down Expand Up @@ -112,55 +113,55 @@ const PinMap PinMap_PWM[] = {

//*** SERIAL ***

const PinMap PinMap_UART_TX[] = {
MBED_WEAK const PinMap PinMap_UART_TX[] = {
{PA_2, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, // Connected to STDIO_UART_TX
{PA_9, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)},
{PB_6, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_USART1)},
{NC, NC, 0}
};

const PinMap PinMap_UART_RX[] = {
MBED_WEAK const PinMap PinMap_UART_RX[] = {
{PA_3, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, // Connected to STDIO_UART_RX
{PA_10, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)},
{PA_15, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)},
{PB_7, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_USART1)},
{NC, NC, 0}
};

const PinMap PinMap_UART_RTS[] = {
MBED_WEAK const PinMap PinMap_UART_RTS[] = {
{PA_12, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)},
{NC, NC, 0}
};

const PinMap PinMap_UART_CTS[] = {
MBED_WEAK const PinMap PinMap_UART_CTS[] = {
{PA_11, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)},
{NC, NC, 0}
};

//*** SPI ***

const PinMap PinMap_SPI_MOSI[] = {
MBED_WEAK const PinMap PinMap_SPI_MOSI[] = {
{PA_7, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF0_SPI1)},
{PB_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF0_SPI1)},
{PB_15, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF0_SPI2)},
{NC, NC, 0}
};

const PinMap PinMap_SPI_MISO[] = {
MBED_WEAK const PinMap PinMap_SPI_MISO[] = {
{PA_6, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF0_SPI1)},
{PB_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF0_SPI1)},
{PB_14, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF0_SPI2)},
{NC, NC, 0}
};

const PinMap PinMap_SPI_SCLK[] = {
MBED_WEAK const PinMap PinMap_SPI_SCLK[] = {
{PA_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF0_SPI1)},
{PB_3, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF0_SPI1)},
{PB_13, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLDOWN, GPIO_AF0_SPI2)},
{NC, NC, 0}
};

const PinMap PinMap_SPI_SSEL[] = {
MBED_WEAK const PinMap PinMap_SPI_SSEL[] = {
{PA_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF0_SPI1)},
{PA_15, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF0_SPI1)},
{PB_12, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF0_SPI2)},
Expand Down
27 changes: 14 additions & 13 deletions targets/TARGET_STM/TARGET_STM32F0/TARGET_NUCLEO_F031K6/PeripheralPins.c
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -29,6 +29,7 @@
*/

#include "PeripheralPins.h"
#include "mbed_toolchain.h"

// =====
// Note: Commented lines are alternative possibilities which are not used per default.
Expand All @@ -38,7 +39,7 @@

//*** ADC ***

const PinMap PinMap_ADC[] = {
MBED_WEAK const PinMap PinMap_ADC[] = {
{PA_0, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 0, 0)}, // ADC_IN0
{PA_1, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC_IN1
// {PA_2, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC_IN2 - Connected to STDIO_UART_TX
Expand All @@ -52,7 +53,7 @@ const PinMap PinMap_ADC[] = {
{NC, NC, 0}
};

const PinMap PinMap_ADC_Internal[] = {
MBED_WEAK const PinMap PinMap_ADC_Internal[] = {
{ADC_TEMP, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 16, 0)}, // ADC_IN16
{ADC_VREF, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 17, 0)}, // ADC_IN17
{ADC_VBAT, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 18, 0)}, // ADC_IN18
Expand All @@ -61,13 +62,13 @@ const PinMap PinMap_ADC_Internal[] = {

//*** I2C ***

const PinMap PinMap_I2C_SDA[] = {
MBED_WEAK const PinMap PinMap_I2C_SDA[] = {
{PA_10, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
{PB_7, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)},
{NC, NC, 0}
};

const PinMap PinMap_I2C_SCL[] = {
MBED_WEAK const PinMap PinMap_I2C_SCL[] = {
{PA_9, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
{PB_6, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)},
{NC, NC, 0}
Expand All @@ -76,7 +77,7 @@ const PinMap PinMap_I2C_SCL[] = {
//*** PWM ***

// TIM2 cannot be used because already used by the us_ticker
const PinMap PinMap_PWM[] = {
MBED_WEAK const PinMap PinMap_PWM[] = {
// {PA_1, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF2_TIM2, 2, 0)}, // TIM2_CH2
// {PA_2, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF2_TIM2, 3, 0)}, // TIM2_CH3 - Connected to STDIO_UART_TX
// {PA_3, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF2_TIM2, 4, 0)}, // TIM2_CH4
Expand Down Expand Up @@ -106,7 +107,7 @@ const PinMap PinMap_PWM[] = {

//*** SERIAL ***

const PinMap PinMap_UART_TX[] = {
MBED_WEAK const PinMap PinMap_UART_TX[] = {
{PA_1, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)},
{PA_2, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, // Connected to STDIO_UART_TX
{PA_9, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)},
Expand All @@ -115,47 +116,47 @@ const PinMap PinMap_UART_TX[] = {
{NC, NC, 0}
};

const PinMap PinMap_UART_RX[] = {
MBED_WEAK const PinMap PinMap_UART_RX[] = {
{PA_3, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)},
{PA_10, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)},
{PA_15, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, // Connected to STDIO_UART_RX
{PB_7, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_USART1)},
{NC, NC, 0}
};

const PinMap PinMap_UART_RTS[] = {
MBED_WEAK const PinMap PinMap_UART_RTS[] = {
{PA_1, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)},
{PA_12, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)},
{NC, NC, 0}
};

const PinMap PinMap_UART_CTS[] = {
MBED_WEAK const PinMap PinMap_UART_CTS[] = {
{PA_0, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)},
{PA_11, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)},
{NC, NC, 0}
};

//*** SPI ***

const PinMap PinMap_SPI_MOSI[] = {
MBED_WEAK const PinMap PinMap_SPI_MOSI[] = {
{PA_7, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF0_SPI1)},
{PB_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF0_SPI1)},
{NC, NC, 0}
};

const PinMap PinMap_SPI_MISO[] = {
MBED_WEAK const PinMap PinMap_SPI_MISO[] = {
{PA_6, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF0_SPI1)},
{PB_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF0_SPI1)},
{NC, NC, 0}
};

const PinMap PinMap_SPI_SCLK[] = {
MBED_WEAK const PinMap PinMap_SPI_SCLK[] = {
{PA_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF0_SPI1)},
{PB_3, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF0_SPI1)},
{NC, NC, 0}
};

const PinMap PinMap_SPI_SSEL[] = {
MBED_WEAK const PinMap PinMap_SPI_SSEL[] = {
{PA_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF0_SPI1)},
// {PA_15, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF0_SPI1)}, // Connected to STDIO_UART_RX
{NC, NC, 0}
Expand Down
31 changes: 16 additions & 15 deletions targets/TARGET_STM/TARGET_STM32F0/TARGET_NUCLEO_F042K6/PeripheralPins.c
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -29,6 +29,7 @@
*/

#include "PeripheralPins.h"
#include "mbed_toolchain.h"

//==============================================================================
// Notes
Expand All @@ -47,7 +48,7 @@

//*** ADC ***

const PinMap PinMap_ADC[] = {
MBED_WEAK const PinMap PinMap_ADC[] = {
{PA_0, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 0, 0)}, // ADC_IN0
{PA_1, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC_IN1
// {PA_2, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC_IN2 - Connected to STDIO_UART_TX
Expand All @@ -61,7 +62,7 @@ const PinMap PinMap_ADC[] = {
{NC, NC, 0}
};

const PinMap PinMap_ADC_Internal[] = {
MBED_WEAK const PinMap PinMap_ADC_Internal[] = {
{ADC_TEMP, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 16, 0)}, // ADC_IN16
{ADC_VREF, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 17, 0)}, // ADC_IN17
{ADC_VBAT, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 18, 0)}, // ADC_IN18
Expand All @@ -70,15 +71,15 @@ const PinMap PinMap_ADC_Internal[] = {

//*** I2C ***

const PinMap PinMap_I2C_SDA[] = {
MBED_WEAK const PinMap PinMap_I2C_SDA[] = {
{PA_10, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
{PA_12, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF5_I2C1)},
{PB_7, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)},
{PF_0, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)},
{NC, NC, 0}
};

const PinMap PinMap_I2C_SCL[] = {
MBED_WEAK const PinMap PinMap_I2C_SCL[] = {
{PA_9, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
{PA_11, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF5_I2C1)},
{PB_6, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)},
Expand All @@ -89,7 +90,7 @@ const PinMap PinMap_I2C_SCL[] = {
//*** PWM ***

// TIM2 (PWM_2) cannot be used because already used by the us_ticker
const PinMap PinMap_PWM[] = {
MBED_WEAK const PinMap PinMap_PWM[] = {
// {PA_1, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF2_TIM2, 2, 0)}, // TIM2_CH2
// {PA_2, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF2_TIM2, 3, 0)}, // TIM2_CH3 - Connected to STDIO_UART_TX
// {PA_3, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF2_TIM2, 4, 0)}, // TIM2_CH4
Expand Down Expand Up @@ -119,68 +120,68 @@ const PinMap PinMap_PWM[] = {

//*** SERIAL ***

const PinMap PinMap_UART_TX[] = {
MBED_WEAK const PinMap PinMap_UART_TX[] = {
{PA_2, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, // Connected to STDIO_UART_TX
{PA_9, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)},
// {PA_14, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, // Connected to SWCLK
{PB_6, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_USART1)},
{NC, NC, 0}
};

const PinMap PinMap_UART_RX[] = {
MBED_WEAK const PinMap PinMap_UART_RX[] = {
{PA_3, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)},
{PA_10, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)},
{PA_15, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, // Connected to STDIO_UART_RX
{PB_7, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_USART1)},
{NC, NC, 0}
};

const PinMap PinMap_UART_RTS[] = {
MBED_WEAK const PinMap PinMap_UART_RTS[] = {
{PA_1, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)},
{PA_12, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)},
{NC, NC, 0}
};

const PinMap PinMap_UART_CTS[] = {
MBED_WEAK const PinMap PinMap_UART_CTS[] = {
{PA_0, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)},
{PA_11, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)},
{NC, NC, 0}
};

//*** SPI ***

const PinMap PinMap_SPI_MOSI[] = {
MBED_WEAK const PinMap PinMap_SPI_MOSI[] = {
{PA_7, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF0_SPI1)},
{PB_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF0_SPI1)},
{NC, NC, 0}
};

const PinMap PinMap_SPI_MISO[] = {
MBED_WEAK const PinMap PinMap_SPI_MISO[] = {
{PA_6, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF0_SPI1)},
{PB_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF0_SPI1)},
{NC, NC, 0}
};

const PinMap PinMap_SPI_SCLK[] = {
MBED_WEAK const PinMap PinMap_SPI_SCLK[] = {
{PA_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF0_SPI1)},
{PB_3, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF0_SPI1)}, // Connected to LED
{NC, NC, 0}
};

const PinMap PinMap_SPI_SSEL[] = {
MBED_WEAK const PinMap PinMap_SPI_SSEL[] = {
{PA_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF0_SPI1)},
// {PA_15, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF0_SPI1)}, // Connected to STDIO_UART_RX
{NC, NC, 0}
};

//*** CAN ***

const PinMap PinMap_CAN_RD[] = {
MBED_WEAK const PinMap PinMap_CAN_RD[] = {
{PA_11, CAN_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF4_CAN)},
{NC, NC, 0}
};

const PinMap PinMap_CAN_TD[] = {
MBED_WEAK const PinMap PinMap_CAN_TD[] = {
{PA_12, CAN_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF4_CAN)},
{NC, NC, 0}
};
Loading