Code::Blocks project file exporter

tools/export/__init__.py

@@ -30,7 +30,7 @@
 from ..targets import TARGET_NAMES
 from . import (lpcxpresso, ds5_5, iar, makefile, embitz, coide, kds, simplicity,
                atmelstudio, mcuxpresso, sw4stm32, e2studio, zip, cmsis, uvision,
-               cdt, vscode, gnuarmeclipse, qtcreator, cmake, nb, cces)
+               cdt, vscode, gnuarmeclipse, qtcreator, cmake, nb, cces, codeblocks)
 
 EXPORTERS = {
     u'uvision5': uvision.Uvision,
@@ -61,7 +61,8 @@
     u'vscode_iar' : vscode.VSCodeIAR,
     u'vscode_armc5' : vscode.VSCodeArmc5,
     u'cmake_gcc_arm': cmake.GccArm,
-    u'cces' : cces.CCES
+    u'cces' : cces.CCES,
+    u'codeblocks': codeblocks.CodeBlocks
 }
 
 ERROR_MESSAGE_UNSUPPORTED_TOOLCHAIN = """

tools/export/codeblocks/__init__.py

@@ -0,0 +1,153 @@
+"""
+mbed SDK
+Copyright (c) 2014-2017 ARM Limited
+Copyright (c) 2018 ON Semiconductor
+
+Licensed under the Apache License, Version 2.0 (the "License");
+you may not use this file except in compliance with the License.
+You may obtain a copy of the License at
+
+    http://www.apache.org/licenses/LICENSE-2.0
+
+Unless required by applicable law or agreed to in writing, software
+distributed under the License is distributed on an "AS IS" BASIS,
+WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+See the License for the specific language governing permissions and
+limitations under the License.
+"""
+import copy
+import stat
+import os
+from os.path import splitext, basename, dirname, abspath, isdir
+from os import remove, mkdir
+from shutil import rmtree, copyfile
+from tools.targets import TARGET_MAP
+from tools.export.exporters import Exporter
+from tools.export.makefile import GccArm
+
+class CodeBlocks(GccArm):
+    NAME = 'Code::Blocks'
+
+    DOT_IN_RELATIVE_PATH = True
+
+    MBED_CONFIG_HEADER_SUPPORTED = True
+
+    PREPROCESS_ASM = False
+
+    POST_BINARY_WHITELIST = set([
+        "NCS36510TargetCode.ncs36510_addfib"
+    ])
+
+    @staticmethod
+    def filter_dot(str_in):
+        """
+        Remove the './' prefix, if present.
+        This function assumes that resources.win_to_unix()
+        replaced all windows backslashes with slashes.
+        """
+        if str_in is None:
+            return None
+        if str_in[:2] == './':
+            return str_in[2:]
+        return str_in
+
+    @staticmethod
+    def prepare_lib(libname):
+        if "lib" == libname[:3]:
+            libname = libname[3:-2]
+        return "-l" + libname
+
+    @staticmethod
+    def prepare_sys_lib(libname):
+        return "-l" + libname
+
+    def generate(self):
+        self.resources.win_to_unix()
+
+        comp_flags = []
+        debug_flags = []
+        release_flags = [ '-Os', '-g1' ]
+        next_is_include = False
+        for f in self.flags['c_flags'] + self.flags['cxx_flags'] + self.flags['common_flags']:
+            f = f.strip()
+            if f == "-include":
+                next_is_include = True
+                continue
+            if f == '-c':
+                continue
+            if next_is_include:
+                f = '-include ' + f
+            next_is_include = False
+            if f.startswith('-O') or f.startswith('-g'):
+                debug_flags.append(f)
+            else:
+                comp_flags.append(f)
+        comp_flags = sorted(list(set(comp_flags)))
+        inc_dirs = [self.filter_dot(s) for s in self.resources.inc_dirs];
+        inc_dirs = [x for x in inc_dirs if (x is not None and
+                                            x != '' and x != '.' and
+                                            not x.startswith('bin') and
+                                            not x.startswith('obj'))];
+
+        c_sources = sorted([self.filter_dot(s) for s in self.resources.c_sources])
+        libraries = [self.prepare_lib(basename(lib)) for lib
+                     in self.resources.libraries]
+        sys_libs = [self.prepare_sys_lib(lib) for lib
+                    in self.toolchain.sys_libs]
+
+        ctx = {
+            'project_name': self.project_name,
+            'debug_flags': debug_flags,
+            'release_flags': release_flags,
+            'comp_flags': comp_flags,
+            'ld_flags': self.flags['ld_flags'],
+            'headers': sorted(list(set([self.filter_dot(s) for s in self.resources.headers]))),
+            'c_sources': c_sources,
+            's_sources': sorted([self.filter_dot(s) for s in self.resources.s_sources]),
+            'cpp_sources': sorted([self.filter_dot(s) for s in self.resources.cpp_sources]),
+            'include_paths': inc_dirs,
+            'linker_script': self.filter_dot(self.resources.linker_script),
+            'libraries': libraries,
+            'sys_libs': sys_libs,
+            'openocdboard': ''
+            }
+
+        openocd_board = {
+            'NCS36510': 'board/ncs36510_axdbg.cfg',
+            'DISCO_F429ZI': 'board/stm32f429discovery.cfg',
+            'DISCO_F469NI': 'board/stm32f469discovery.cfg',
+            'DISCO_L053C8': 'board/stm32l0discovery.cfg',
+            'DISCO_L072CZ_LRWAN1': 'board/stm32l0discovery.cfg',
+            'DISCO_F769NI': 'board/stm32f7discovery.cfg',
+            'DISCO_L475VG_IOT01A': 'board/stm32l4discovery.cfg',
+            'DISCO_L476VG': 'board/stm32l4discovery.cfg',
+            'NRF51822': 'board/nordic_nrf51822_mkit.cfg',
+            'NRF51822_BOOT': 'board/nordic_nrf51822_mkit.cfg',
+            'NRF51822_OTA': 'board/nordic_nrf51822_mkit.cfg',
+            'NRF51_DK_LEGACY': 'board/nordic_nrf51_dk.cfg',
+            'NRF51_DK_BOOT': 'board/nordic_nrf51_dk.cfg',
+            'NRF51_DK_OTA': 'board/nordic_nrf51_dk.cfg',
+            'NRF51_DK': 'board/nordic_nrf51_dk.cfg'
+            }
+
+        if self.target in openocd_board:
+            ctx['openocdboard'] = openocd_board[self.target]
+
+        self.gen_file('codeblocks/cbp.tmpl', ctx, "%s.%s" % (self.project_name, 'cbp'))
+        for f in [ 'obj', 'bin' ]:
+            if not isdir(f):
+                mkdir(f)
+            self.gen_file_nonoverwrite('codeblocks/mbedignore.tmpl',
+                                       ctx, f + '/.mbedignore')
+
+        # finally, generate the project file
+        super(CodeBlocks, self).generate()
+
+    @staticmethod
+    def clean(project_name):
+        for ext in ['cbp', 'depend', 'layout']:
+            remove("%s.%s" % (project_name, ext))
+        for f in ['openocd.log']:
+            remove(f)
+        for d in ['bin', 'obj']:
+            rmtree(d, ignore_errors=True)

tools/export/codeblocks/cbp.tmpl

@@ -0,0 +1,93 @@
+<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
+<CodeBlocks_project_file>
+	<FileVersion major="1" minor="6" />
+	<Project>
+		<Option title="{{project_name}}" />
+		<Option pch_mode="2" />
+		<Option compiler="arm-elf-gcc" />
+		<Build>
+			<Target title="Debug">
+				<Option output="bin/Debug/{{project_name}}.elf" prefix_auto="1" extension_auto="0" />
+				<Option object_output="obj/Debug/" />
+				<Option type="1" />
+				<Option compiler="arm-elf-gcc" />
+				<Option use_console_runner="0" />
+				<Compiler>
+					{%  for f in debug_flags -%}
+					<Add option="{{f}}" />
+					{%  endfor -%}
+				</Compiler>
+				<Linker>
+					<Add option='-Wl,-Map,&quot;bin/Debug/{{project_name}}.map&quot;' />
+				</Linker>
+			</Target>
+			<Target title="Release">
+				<Option output="bin/Release/{{project_name}}.elf" prefix_auto="1" extension_auto="0" />
+				<Option object_output="obj/Release/" />
+				<Option type="1" />
+				<Option compiler="arm-elf-gcc" />
+				<Option use_console_runner="0" />
+				<Compiler>
+                                        <Add option="-DNDEBUG" />
+					{%  for f in release_flags -%}
+					<Add option="{{f}}" />
+					{%  endfor -%}
+				</Compiler>
+				<Linker>
+					<Add option='-Wl,-Map,&quot;bin/Release/{{project_name}}.map&quot;' />
+				</Linker>
+			</Target>
+		</Build>
+		<Compiler>
+			{%  for f in comp_flags -%}
+			<Add option="{{f}}" />
+			{%  endfor -%}
+			{%  for f in include_paths -%}
+			<Add directory="{{f}}" />
+			{%  endfor -%}
+		</Compiler>
+		<Linker>
+			{%  for f in ld_flags -%}
+			<Add option="{{f}}" />
+			{%  endfor -%}
+			<Add option="-T {{linker_script}}" />
+			<Add option="-Wl,--start-group {{sys_libs|join(" ")}} {{libraries|join(" ")}} -Wl,--end-group" />
+			{%  for f in sys_libs -%}
+			<Add option="{{f}}" />
+			{%  endfor -%}
+			{%  for f in libraries -%}
+			<Add option="{{f}}" />
+			{%  endfor -%}
+		</Linker>
+		{%  for f in headers -%}
+		<Unit filename="{{f}}"/>
+		{%  endfor -%}
+		{%  for f in c_sources -%}
+		<Unit filename="{{f}}">
+			<Option compilerVar="CC" />
+		</Unit>
+		{%  endfor -%}
+		{%  for f in s_sources -%}
+		<Unit filename="{{f}}">
+			<Option compilerVar="CPP" />
+		</Unit>
+		{%  endfor -%}
+		{%  for f in cpp_sources -%}
+		<Unit filename="{{f}}">
+			<Option compilerVar="CPP" />
+		</Unit>
+		{%  endfor -%}
+		<Extensions>
+		        {% if openocdboard != '' -%}
+			<debugger>
+				<remote_debugging target="Release">
+					<options conn_type="3" serial_baud="115200" pipe_command="openocd -p -l openocd.log -f {{openocdboard}}" additional_cmds='monitor reset halt&#x0A;monitor flash write_image erase &quot;bin/Release/{{project_name}}.elf&quot;&#x0A;file &quot;bin/Release/{{project_name}}.elf&quot;&#x0A;monitor reset halt&#x0A;' extended_remote="1" />
+				</remote_debugging>
+				<remote_debugging target="Debug">
+					<options conn_type="3" serial_baud="115200" pipe_command="openocd -p -l openocd.log -f {{openocdboard}}" additional_cmds='monitor reset halt&#x0A;monitor flash write_image erase &quot;bin/Debug/{{project_name}}.elf&quot;&#x0A;file &quot;bin/Debug/{{project_name}}.elf&quot;&#x0A;monitor reset halt&#x0A;' extended_remote="1" />
+				</remote_debugging>
+			</debugger>
+			{% endif -%}
+		</Extensions>
+	</Project>
+</CodeBlocks_project_file>

tools/export/codeblocks/mbedignore.tmpl

@@ -0,0 +1 @@
+*