STM32F3: Update with STM32CubeF3 V1.9.0

targets/TARGET_STM/TARGET_STM32F3/TARGET_STM32F302x8/device/TOOLCHAIN_ARM_MICRO/startup_stm32f302x8.S

@@ -1,33 +1,41 @@
 ;******************** (C) COPYRIGHT 2014 STMicroelectronics ********************
 ;* File Name          : startup_stm32f302x8.s
-; STM32F302x8 Devices vector table for MDK ARM_MICRO toolchain
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-; Copyright (c) 2014, STMicroelectronics
-; All rights reserved.
+;* Author             : MCD Application Team
+;* Description        : STM32F302x6/x8 devices vector table for MDK-ARM toolchain.
+;*                      This module performs:
+;*                      - Set the initial SP
+;*                      - Set the initial PC == Reset_Handler
+;*                      - Set the vector table entries with the exceptions ISR address
+;*                      - Branches to __main in the C library (which eventually
+;*                        calls main()).
+;*                      After Reset the CortexM4 processor is in Thread mode,
+;*                      priority is Privileged, and the Stack is set to Main.
+;*
+;*******************************************************************************
 ;
-; Redistribution and use in source and binary forms, with or without
-; modification, are permitted provided that the following conditions are met:
+;* Redistribution and use in source and binary forms, with or without modification,
+;* are permitted provided that the following conditions are met:
+;*   1. Redistributions of source code must retain the above copyright notice,
+;*      this list of conditions and the following disclaimer.
+;*   2. Redistributions in binary form must reproduce the above copyright notice,
+;*      this list of conditions and the following disclaimer in the documentation
+;*      and/or other materials provided with the distribution.
+;*   3. Neither the name of STMicroelectronics nor the names of its contributors
+;*      may be used to endorse or promote products derived from this software
+;*      without specific prior written permission.
+;*
+;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 ;
-; 1. Redistributions of source code must retain the above copyright notice,
-;     this list of conditions and the following disclaimer.
-; 2. Redistributions in binary form must reproduce the above copyright notice,
-;    this list of conditions and the following disclaimer in the documentation
-;    and/or other materials provided with the distribution.
-; 3. Neither the name of STMicroelectronics nor the names of its contributors
-;    may be used to endorse or promote products derived from this software
-;    without specific prior written permission.
-;
-; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-; AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-; IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-; DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-; FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-; DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-; SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-; CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-; OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-; OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+;*******************************************************************************
 
 ; Amount of memory (in bytes) allocated for Stack
 ; Tailor this value to your application needs

targets/TARGET_STM/TARGET_STM32F3/TARGET_STM32F302x8/device/TOOLCHAIN_ARM_STD/startup_stm32f302x8.S

@@ -1,33 +1,41 @@
 ;******************** (C) COPYRIGHT 2014 STMicroelectronics ********************
 ;* File Name          : startup_stm32f302x8.s
-; STM32F302x8 Devices vector table for MDK ARM_STD toolchain
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-; Copyright (c) 2014, STMicroelectronics
-; All rights reserved.
+;* Author             : MCD Application Team
+;* Description        : STM32F302x6/x8 devices vector table for MDK-ARM toolchain.
+;*                      This module performs:
+;*                      - Set the initial SP
+;*                      - Set the initial PC == Reset_Handler
+;*                      - Set the vector table entries with the exceptions ISR address
+;*                      - Branches to __main in the C library (which eventually
+;*                        calls main()).
+;*                      After Reset the CortexM4 processor is in Thread mode,
+;*                      priority is Privileged, and the Stack is set to Main.
+;*
+;*******************************************************************************
 ;
-; Redistribution and use in source and binary forms, with or without
-; modification, are permitted provided that the following conditions are met:
+;* Redistribution and use in source and binary forms, with or without modification,
+;* are permitted provided that the following conditions are met:
+;*   1. Redistributions of source code must retain the above copyright notice,
+;*      this list of conditions and the following disclaimer.
+;*   2. Redistributions in binary form must reproduce the above copyright notice,
+;*      this list of conditions and the following disclaimer in the documentation
+;*      and/or other materials provided with the distribution.
+;*   3. Neither the name of STMicroelectronics nor the names of its contributors
+;*      may be used to endorse or promote products derived from this software
+;*      without specific prior written permission.
+;*
+;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 ;
-; 1. Redistributions of source code must retain the above copyright notice,
-;     this list of conditions and the following disclaimer.
-; 2. Redistributions in binary form must reproduce the above copyright notice,
-;    this list of conditions and the following disclaimer in the documentation
-;    and/or other materials provided with the distribution.
-; 3. Neither the name of STMicroelectronics nor the names of its contributors
-;    may be used to endorse or promote products derived from this software
-;    without specific prior written permission.
-;
-; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-; AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-; IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-; DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-; FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-; DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-; SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-; CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-; OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-; OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+;*******************************************************************************
 
 __initial_sp    EQU     0x20004000 ; Top of RAM
 

targets/TARGET_STM/TARGET_STM32F3/TARGET_STM32F302x8/device/TOOLCHAIN_GCC_ARM/startup_stm32f302x8.S

@@ -2,10 +2,7 @@
   ******************************************************************************
   * @file      startup_stm32f302x8.s
   * @author    MCD Application Team
-  * @version   V1.1.0
-  * @date      12-Sept-2014
-  * @brief     STM32F302x6/STM32F302x8 devices vector table for 
-  *            Atollic TrueSTUDIO toolchain.
+  * @brief     STM32F302x6/STM32F302x8 devices vector table for GCC toolchain.
   *            This module performs:
   *                - Set the initial SP
   *                - Set the initial PC == Reset_Handler,
@@ -16,21 +13,28 @@
   *            After Reset the Cortex-M4 processor is in Thread mode,
   *            priority is Privileged, and the Stack is set to Main.
   ******************************************************************************
-  * @attention
   *
-  * <h2><center>&copy; COPYRIGHT 2014 STMicroelectronics</center></h2>
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
   *
-  * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
-  * You may not use this file except in compliance with the License.
-  * You may obtain a copy of the License at:
-  *
-  *        http://www.st.com/software_license_agreement_liberty_v2
-  *
-  * Unless required by applicable law or agreed to in writing, software 
-  * distributed under the License is distributed on an "AS IS" BASIS, 
-  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-  * See the License for the specific language governing permissions and
-  * limitations under the License.
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
   *
   ******************************************************************************
   */
@@ -50,6 +54,10 @@ defined in linker script */
 .word	_sdata
 /* end address for the .data section. defined in linker script */
 .word	_edata
+/* start address for the .bss section. defined in linker script */
+.word	_sbss
+/* end address for the .bss section. defined in linker script */
+.word	_ebss
 
 .equ  BootRAM,        0xF1E0F85F
 /**
@@ -83,6 +91,17 @@ LoopCopyDataInit:
 	adds	r2, r0, r1
 	cmp	r2, r3
 	bcc	CopyDataInit
+	ldr	r2, =_sbss
+	b	LoopFillZerobss
+/* Zero fill the bss segment. */
+FillZerobss:
+	movs	r3, #0
+	str	r3, [r2], #4
+
+LoopFillZerobss:
+	ldr	r3, = _ebss
+	cmp	r2, r3
+	bcc	FillZerobss
 
 /* Call the clock system intitialization function.*/
     bl  SystemInit

targets/TARGET_STM/TARGET_STM32F3/TARGET_STM32F302x8/device/TOOLCHAIN_IAR/startup_stm32f302x8.S

@@ -1,8 +1,6 @@
 ;/******************** (C) COPYRIGHT 2014 STMicroelectronics ********************
 ;* File Name          : startup_stm32f302x8.s
 ;* Author             : MCD Application Team
-;* Version            : V2.1.0
-;* Date               : 12-Sept-2014
 ;* Description        : STM32F302x6/STM32F302x8 devices vector table for EWARM toolchain.
 ;*                      This module performs:
 ;*                      - Set the initial SP
@@ -15,8 +13,6 @@
 ;*                      priority is Privileged, and the Stack is set to Main.
 ;********************************************************************************
 ;*
-;* <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
-;*
 ;* Redistribution and use in source and binary forms, with or without modification,
 ;* are permitted provided that the following conditions are met:
 ;*   1. Redistributions of source code must retain the above copyright notice,

targets/TARGET_STM/TARGET_STM32F3/TARGET_STM32F302x8/device/hal_tick.h

@@ -45,11 +45,11 @@
 
 #define TIM_MST      TIM2
 #define TIM_MST_IRQ  TIM2_IRQn
-#define TIM_MST_RCC  __TIM2_CLK_ENABLE()
+#define TIM_MST_RCC  __HAL_RCC_TIM2_CLK_ENABLE()
 #define TIM_MST_DBGMCU_FREEZE  __HAL_DBGMCU_FREEZE_TIM2()
 
-#define TIM_MST_RESET_ON   __TIM2_FORCE_RESET()
-#define TIM_MST_RESET_OFF  __TIM2_RELEASE_RESET()
+#define TIM_MST_RESET_ON   __HAL_RCC_TIM2_FORCE_RESET()
+#define TIM_MST_RESET_OFF  __HAL_RCC_TIM2_RELEASE_RESET()
 
 #define TIM_MST_16BIT  0 // 1=16-bit timer, 0=32-bit timer