Split Az.Network Examples

src/Network/Network/help/Add-AzApplicationGatewayAuthenticationCertificate.md

@@ -24,10 +24,10 @@ The **Add-AzApplicationGatewayAuthenticationCertificate** cmdlet adds an authent
 ## EXAMPLES
 
 ### Example 1: Add authentication certificate to an application gateway
-```
-PS C:\> $appgw = Get-AzApplicationGateway -ResourceGroupName "rg" -Name "appGwName"
-PS C:\> $appgw = Add-AzApplicationGatewayAuthenticationCertificate -ApplicationGateway $appgw -Name "cert01" -CertificateFile "C:\cert.cer"
-PS C:\> $appgw = Set-AzApplicationGateway -ApplicationGateway $appgw
+```powershell
+$appgw = Get-AzApplicationGateway -ResourceGroupName "rg" -Name "appGwName"
+$appgw = Add-AzApplicationGatewayAuthenticationCertificate -ApplicationGateway $appgw -Name "cert01" -CertificateFile "C:\cert.cer"
+$appgw = Set-AzApplicationGateway -ApplicationGateway $appgw
 ```
 
 The first command gets an application gateway named appGwName and stores it in $appgw variable.

src/Network/Network/help/Add-AzApplicationGatewayBackendAddressPool.md

@@ -26,17 +26,17 @@ A back-end address can be specified using an IP address, a fully-qualified domai
 ## EXAMPLES
 
 ### Example 1: Add a back-end address pool by using a back-end server FQDN
-```
-PS C:\>$AppGw = Get-AzApplicationGateway -Name "ApplicationGateway01" -ResourceGroupName "ResourceGroup01"
-PS C:\> $AppGw = Add-AzApplicationGatewayBackendAddressPool -ApplicationGateway $AppGw -Name "Pool02" -BackendFqdns "contoso1.com", " contoso1.com"
+```powershell
+$AppGw = Get-AzApplicationGateway -Name "ApplicationGateway01" -ResourceGroupName "ResourceGroup01"
+$AppGw = Add-AzApplicationGatewayBackendAddressPool -ApplicationGateway $AppGw -Name "Pool02" -BackendFqdns "contoso1.com", " contoso1.com"
 ```
 
 The first command gets the application gateway named ApplicationGateway01 in the resource group named ResourceGroup01, and stores it in the $AppGw variable.The second command adds the back-end address pool of the application gateway stored in $AppGw by using FQDNs.
 
 ### Example 2: Add a back-end address pool by using backend server IP addresses
-```
-PS C:\>$AppGw = Get-AzApplicationGateway -Name "ApplicationGateway01" -ResourceGroupName "ResourceGroup01"
-PS C:\> $AppGw = Add-AzApplicationGatewayBackendAddressPool -ApplicationGateway $ AppGw -Name "Pool02" -BackendIPAddresses "10.10.10.10", "10.10.10.11"
+```powershell
+$AppGw = Get-AzApplicationGateway -Name "ApplicationGateway01" -ResourceGroupName "ResourceGroup01"
+$AppGw = Add-AzApplicationGatewayBackendAddressPool -ApplicationGateway $ AppGw -Name "Pool02" -BackendIPAddresses "10.10.10.10", "10.10.10.11"
 ```
 
 The first command gets the application gateway named ApplicationGateway01 in the resource group named ResourceGroup01, and stores it in the $AppGw variable.The second command adds the back-end address pool of the application gateway stored in $AppGw by using IP addresses.

src/Network/Network/help/Add-AzApplicationGatewayBackendHttpSetting.md

@@ -31,8 +31,8 @@ Back-end HTTP settings are applied to all back-end servers in the pool.
 
 ### Example 1: Add back-end HTTP settings to an application gateway
 ```powershell
-PS C:\>$AppGw = Get-AzApplicationGateway -Name "ApplicationGateway01" -ResourceGroupName "ResourceGroup01"
-PS C:\> $AppGw = Add-AzApplicationGatewayBackendHttpSetting -ApplicationGateway $AppGw -Name "Setting02" -Port 88 -Protocol "HTTP" -CookieBasedAffinity "Disabled"
+$AppGw = Get-AzApplicationGateway -Name "ApplicationGateway01" -ResourceGroupName "ResourceGroup01"
+$AppGw = Add-AzApplicationGatewayBackendHttpSetting -ApplicationGateway $AppGw -Name "Setting02" -Port 88 -Protocol "HTTP" -CookieBasedAffinity "Disabled"
 ```
 
 The first command gets the application gateway named ApplicationGateway01 that belongs to the resource group named ResourceGroup01 and stores it in the $AppGw variable.The second command adds back-end HTTP settings to the application gateway, setting the port to 88 and the protocol to HTTP and names the settings Setting02.

src/Network/Network/help/Add-AzApplicationGatewayCustomError.md

@@ -24,12 +24,12 @@ The **Add-AzApplicationGatewayCustomError** cmdlet adds a custom error to an app
 
 ### Example 1: Adds custom error to application gateway level
 ```powershell
-PS C:\> $resourceGroupName = "resourceGroupName"
-PS C:\> $AppGWName = "applicationGatewayName"
-PS C:\> $AppGw = Get-AzApplicationGateway -Name $AppGWName -ResourceGroup $resourceGroupName
-PS C:\> $customError502Url = "https://mycustomerrorpages.blob.core.windows.net/errorpages/502.htm"
-PS C:\> $updatedgateway = Add-AzApplicationGatewayCustomError -ApplicationGateway $AppGw -StatusCode HttpStatus502 -CustomErrorPageUrl $customError502Url
-PS C:\> Set-AzApplicationGateway -ApplicationGateway $AppGw
+$resourceGroupName = "resourceGroupName"
+$AppGWName = "applicationGatewayName"
+$AppGw = Get-AzApplicationGateway -Name $AppGWName -ResourceGroup $resourceGroupName
+$customError502Url = "https://mycustomerrorpages.blob.core.windows.net/errorpages/502.htm"
+$updatedgateway = Add-AzApplicationGatewayCustomError -ApplicationGateway $AppGw -StatusCode HttpStatus502 -CustomErrorPageUrl $customError502Url
+Set-AzApplicationGateway -ApplicationGateway $AppGw
 ```
 
 This command adds a custom error of http status code 502 to the application gateway $appgw, and return the updated gateway.

src/Network/Network/help/Add-AzApplicationGatewayFrontendIPConfig.md

@@ -39,22 +39,22 @@ Add the public IP address and private IP address as separate front-end IPs.
 ## EXAMPLES
 
 ### Example 1: Add a public IP as the front-end IP address
-```
-PS C:\>$PublicIp = New-AzPublicIpAddress -ResourceGroupName "ResourceGroup01" -Name "PublicIp01" -location "West US" -AllocationMethod Dynamic
-PS C:\> $AppGw = Get-AzApplicationGateway -Name "ApplicationGateway01" -ResourceGroupName "ResourceGroup01"
-PS C:\> $AppGw = Add-AzApplicationGatewayFrontendIPConfig -ApplicationGateway $AppGw -Name "FrontEndIp01" -PublicIPAddress $PublicIp
+```powershell
+$PublicIp = New-AzPublicIpAddress -ResourceGroupName "ResourceGroup01" -Name "PublicIp01" -location "West US" -AllocationMethod Dynamic
+$AppGw = Get-AzApplicationGateway -Name "ApplicationGateway01" -ResourceGroupName "ResourceGroup01"
+$AppGw = Add-AzApplicationGatewayFrontendIPConfig -ApplicationGateway $AppGw -Name "FrontEndIp01" -PublicIPAddress $PublicIp
 ```
 
 The first command creates a public IP address object and stores it in the $PublicIp variable.
 The second command gets the application gateway named ApplicationGateway01 that belongs to the resource group named ResourceGroup01, and stores it in the $AppGw variable.
 The third command adds the front-end IP configuration named FrontEndIp01, for the gateway in $AppGw, using the address stored in $PublicIp.
 
 ### Example 2: Add a static private IP as the front-end IP address
-```
-PS C:\>$VNet = Get-AzVirtualNetwork -Name "VNet01" -ResourceGroupName "ResourceGroup01"
-PS C:\> $Subnet = Get-AzVirtualNetworkSubnetConfig -Name "Subnet01" -VirtualNetwork $VNet
-PS C:\> $AppGw = Get-AzApplicationGateway -Name "ApplicationGateway01" -ResourceGroupName "ResourceGroup01"
-PS C:\> $AppGw = Add-AzApplicationGatewayFrontendIPConfig -ApplicationGateway $AppGw -Name "FrontendIP02" -Subnet $Subnet -PrivateIPAddress 10.0.1.1
+```powershell
+$VNet = Get-AzVirtualNetwork -Name "VNet01" -ResourceGroupName "ResourceGroup01"
+$Subnet = Get-AzVirtualNetworkSubnetConfig -Name "Subnet01" -VirtualNetwork $VNet
+$AppGw = Get-AzApplicationGateway -Name "ApplicationGateway01" -ResourceGroupName "ResourceGroup01"
+$AppGw = Add-AzApplicationGatewayFrontendIPConfig -ApplicationGateway $AppGw -Name "FrontendIP02" -Subnet $Subnet -PrivateIPAddress 10.0.1.1
 ```
 
 The first command gets a virtual network named VNet01 that belongs to the resource group named ResourceGroup01, and stores it in the $VNet variable.
@@ -63,11 +63,11 @@ The third command gets the application gateway named ApplicationGateway01 that b
 The fourth command adds a front-end IP configuration named FrontendIP02 using $Subnet from the second command and the private IP address 10.0.1.1.
 
 ### Example 3: Add a dynamic private IP as the front-end IP address
-```
-PS C:\>$VNet = Get-AzVirtualNetwork -Name "VNet01" -ResourceGroupName "ResourceGroup01"
-PS C:\> $Subnet = Get-AzVirtualNetworkSubnetConfig -Name "Subnet01" -VirtualNetwork $VNet
-PS C:\> $AppGw = Get-AzApplicationGateway -Name "ApplicationGateway01" -ResourceGroupName "ResourceGroup01"
-PS C:\> $AppGw = Add-AzApplicationGatewayFrontendIPConfig -ApplicationGateway $AppGw -Name "FrontendIP02" -Subnet $Subnet
+```powershell
+$VNet = Get-AzVirtualNetwork -Name "VNet01" -ResourceGroupName "ResourceGroup01"
+$Subnet = Get-AzVirtualNetworkSubnetConfig -Name "Subnet01" -VirtualNetwork $VNet
+$AppGw = Get-AzApplicationGateway -Name "ApplicationGateway01" -ResourceGroupName "ResourceGroup01"
+$AppGw = Add-AzApplicationGatewayFrontendIPConfig -ApplicationGateway $AppGw -Name "FrontendIP02" -Subnet $Subnet
 ```
 
 The first command gets a virtual network named VNet01 that belongs to the resource group named ResourceGroup01, and stores it in the $VNet variable.

src/Network/Network/help/Add-AzApplicationGatewayFrontendPort.md

@@ -24,9 +24,9 @@ The **Add-AzApplicationGatewayFrontendPort** cmdlet adds a front-end port to an
 ## EXAMPLES
 
 ### Example 1: Add a front-end port to an application gateway
-```
-PS C:\>$AppGw = Get-AzApplicationGateway -Name "ApplicationGateway01" -ResourceGroupName "ResourceGroup01"
-PS C:\> $AppGw = Add-AzApplicationGatewayFrontendPort -ApplicationGateway $AppGw -Name "FrontEndPort01" -Port 80
+```powershell
+$AppGw = Get-AzApplicationGateway -Name "ApplicationGateway01" -ResourceGroupName "ResourceGroup01"
+$AppGw = Add-AzApplicationGatewayFrontendPort -ApplicationGateway $AppGw -Name "FrontEndPort01" -Port 80
 ```
 
 The first command gets the application gateway named ApplicationGateway01 that belongs to the resource group named ResourceGroup01 and stores it in the $AppGw variable.

src/Network/Network/help/Add-AzApplicationGatewayHttpListener.md

@@ -41,26 +41,26 @@ The **Add-AzApplicationGatewayHttpListener** cmdlet adds a HTTP listener to an a
 ## EXAMPLES
 
 ### Example 1: Add a HTTP listener
-```
-PS C:\>$AppGw = Get-AzApplicationGateway -Name "ApplicationGateway01" -ResourceGroupName "ResourceGroup01"
-PS C:\> $Appgw = Add-AzApplicationGatewayHttpListener -ApplicationGateway $AppGw -Name "listener01" -Protocol "Http" -FrontendIpConfiguration $FIP01 -FrontendPort $FP01
+```powershell
+$AppGw = Get-AzApplicationGateway -Name "ApplicationGateway01" -ResourceGroupName "ResourceGroup01"
+$Appgw = Add-AzApplicationGatewayHttpListener -ApplicationGateway $AppGw -Name "listener01" -Protocol "Http" -FrontendIpConfiguration $FIP01 -FrontendPort $FP01
 ```
 
 The first command gets the application gateway and stores it in the $AppGw variable.The second command adds the HTTP listener to the application gateway.
 
 ### Example 2: Add a HTTPS listener with SSL
-```
-PS C:\>$AppGw = Get-AzApplicationGateway -Name "ApplicationGateway01" -ResourceGroupName "ResourceGroup01"
-PS C:\> $AppGw = Add-AzApplicationGatewayHttpListener -ApplicationGateway $AppGw -Name "Listener01" -Protocol "Https" -FrontendIpConfiguration $FIP01 -FrontendPort $FP01 -SslCertificate $SSLCert01
+```powershell
+$AppGw = Get-AzApplicationGateway -Name "ApplicationGateway01" -ResourceGroupName "ResourceGroup01"
+$AppGw = Add-AzApplicationGatewayHttpListener -ApplicationGateway $AppGw -Name "Listener01" -Protocol "Https" -FrontendIpConfiguration $FIP01 -FrontendPort $FP01 -SslCertificate $SSLCert01
 ```
 
 The first command gets the application gateway and stores it in the $AppGw variable.
 The second command adds the listener, which uses the HTTPS protocol, to the application gateway.
 
 ### Example 3: Add a HTTPS listener with SSL and HostNames
-```
-PS C:\>$AppGw = Get-AzApplicationGateway -Name "ApplicationGateway01" -ResourceGroupName "ResourceGroup01"
-PS C:\> $AppGw = Add-AzApplicationGatewayHttpListener -ApplicationGateway $AppGw -Name "Listener01" -Protocol "Https" -FrontendIpConfiguration $FIP01 -FrontendPort $FP01 -SslCertificate $SSLCert01 -HostNames "*.contoso.com","www.microsoft.com"
+```powershell
+$AppGw = Get-AzApplicationGateway -Name "ApplicationGateway01" -ResourceGroupName "ResourceGroup01"
+$AppGw = Add-AzApplicationGatewayHttpListener -ApplicationGateway $AppGw -Name "Listener01" -Protocol "Https" -FrontendIpConfiguration $FIP01 -FrontendPort $FP01 -SslCertificate $SSLCert01 -HostNames "*.contoso.com","www.microsoft.com"
 ```
 
 The first command gets the application gateway and stores it in the $AppGw variable.

src/Network/Network/help/Add-AzApplicationGatewayHttpListenerCustomError.md

@@ -25,8 +25,8 @@ The **Add-AzApplicationGatewayCustomError** cmdlet adds a custom error to a http
 
 ### Example 1: Adds custom error to http listener level
 ```powershell
-PS C:\> $customError502Url = "https://mycustomerrorpages.blob.core.windows.net/errorpages/502.htm"
-PS C:\> $updatedlistener = Add-AzApplicationGatewayHttpListenerCustomError -HttpListener $listener01 -StatusCode HttpStatus502 -CustomErrorPageUrl $customError502Url
+$customError502Url = "https://mycustomerrorpages.blob.core.windows.net/errorpages/502.htm"
+$updatedlistener = Add-AzApplicationGatewayHttpListenerCustomError -HttpListener $listener01 -StatusCode HttpStatus502 -CustomErrorPageUrl $customError502Url
 ```
 
 This command adds a custom error of http status code 502 to the http listener $listener01, and return the updated listener.

src/Network/Network/help/Add-AzApplicationGatewayIPConfiguration.md

@@ -32,11 +32,11 @@ IP configurations contain the subnet in which the application gateway is deploye
 ## EXAMPLES
 
 ### Example 1: Add an virtual network configuration to an application gateway
-```
-PS C:\>$Vnet = Get-AzVirtualNetwork -Name "Vnet01" -ResourceGroupName "ResourceGroup01"
-PS C:\> $Subnet = Get-AzVirtualNetworkSubnetConfig -Name "Subnet01" -VirtualNetwork $Vnet 
-PS C:\> $AppGw = Get-AzApplicationGateway -Name "ApplicationGateway01" -ResourceGroupName "ResourceGroup01"
-PS C:\> $AppGw = Add-AzApplicationGatewayIPConfiguration -ApplicationGateway $AppGw -Name "Appgwsubnet01" -Subnet $Subnet
+```powershell
+$Vnet = Get-AzVirtualNetwork -Name "Vnet01" -ResourceGroupName "ResourceGroup01"
+$Subnet = Get-AzVirtualNetworkSubnetConfig -Name "Subnet01" -VirtualNetwork $Vnet 
+$AppGw = Get-AzApplicationGateway -Name "ApplicationGateway01" -ResourceGroupName "ResourceGroup01"
+$AppGw = Add-AzApplicationGatewayIPConfiguration -ApplicationGateway $AppGw -Name "Appgwsubnet01" -Subnet $Subnet
 ```
 
 The first command gets a virtual network.

src/Network/Network/help/Add-AzApplicationGatewayPrivateLinkConfiguration.md

@@ -25,9 +25,9 @@ The **Add-AzApplicationGatewayPrivateLinkConfiguration** cmdlet adds a private l
 
 ### Example 1
 ```powershell
-PS C:\> $PrivateLinkIpConfiguration = New-AzApplicationGatewayPrivateLinkConfiguration -Name "ipConfig01" -Subnet $subnet -Primary
-PS C:\> $AppGw = Get-AzApplicationGateway -Name "ApplicationGateway01" -ResourceGroupName "ResourceGroup01"
-PS C:\> $AppGw = Add-AzApplicationGatewayPrivateLinkConfiguration -ApplicationGateway $AppGw -Name "privateLinkConfig01" -IpConfiguration $PrivateLinkIpConfiguration
+$PrivateLinkIpConfiguration = New-AzApplicationGatewayPrivateLinkConfiguration -Name "ipConfig01" -Subnet $subnet -Primary
+$AppGw = Get-AzApplicationGateway -Name "ApplicationGateway01" -ResourceGroupName "ResourceGroup01"
+$AppGw = Add-AzApplicationGatewayPrivateLinkConfiguration -ApplicationGateway $AppGw -Name "privateLinkConfig01" -IpConfiguration $PrivateLinkIpConfiguration
 ```
 
 The first command creates a privateLinkIpConfiguration and stores it in the $PrivateLinkIpConfiguration variable.

src/Network/Network/help/Add-AzApplicationGatewayProbeConfig.md

@@ -26,8 +26,8 @@ The Add-AzApplicationGatewayProbeConfig cmdlet adds a health probe to an Applica
 ## EXAMPLES
 
 ### Example 1: Add a health probe to an application gateway
-```
-PS C:\>$Probe = Add-AzApplicationGatewayProbeConfig -ApplicationGateway Gateway -Name "Probe01" -Protocol Http -HostName "contoso.com" -Path "/path/custompath.htm" -Interval 30 -Timeout 120 -UnhealthyThreshold 8
+```powershell
+$Probe = Add-AzApplicationGatewayProbeConfig -ApplicationGateway Gateway -Name "Probe01" -Protocol Http -HostName "contoso.com" -Path "/path/custompath.htm" -Interval 30 -Timeout 120 -UnhealthyThreshold 8
 ```
 
 This command adds a health probe named Probe01 for the application gateway named Gateway.

src/Network/Network/help/Add-AzApplicationGatewayRedirectConfiguration.md

@@ -40,8 +40,8 @@ The **Add-AzApplicationGatewayRedirectConfiguration** cmdlet adds a redirect con
 
 ### Example 1
 ```powershell
-PS C:\>$AppGw = Get-AzApplicationGateway -Name "ApplicationGateway01" -ResourceGroupName "ResourceGroup01"
-PS C:\>$Appgw = Add-AzApplicationGatewayRedirectConfiguration -ApplicationGateway $AppGw -Name "Redirect01" -RedirectType Permanent -TargetListener $listener01
+$AppGw = Get-AzApplicationGateway -Name "ApplicationGateway01" -ResourceGroupName "ResourceGroup01"
+$Appgw = Add-AzApplicationGatewayRedirectConfiguration -ApplicationGateway $AppGw -Name "Redirect01" -RedirectType Permanent -TargetListener $listener01
 ```
 
 The first command gets the application gateway and stores it in the $AppGw variable.

src/Network/Network/help/Add-AzApplicationGatewayRequestRoutingRule.md

@@ -38,9 +38,9 @@ The **Add-AzApplicationGatewayRequestRoutingRule** cmdlet adds a request routing
 ## EXAMPLES
 
 ### Example 1: Add a request routing rule to an application gateway
-```
-PS C:\>$AppGw = Get-AzApplicationGateway -Name "ApplicationGateway01" -ResourceGroupName "ResourceGroup01"
-PS C:\> $Appgw = Add-AzApplicationGatewayRequestRoutingRule -ApplicationGateway $AppGw -Name "Rule01" -RuleType Basic -Priority 100 -BackendHttpSettings $Setting -HttpListener $Listener -BackendAddressPool $Pool
+```powershell
+$AppGw = Get-AzApplicationGateway -Name "ApplicationGateway01" -ResourceGroupName "ResourceGroup01"
+$Appgw = Add-AzApplicationGatewayRequestRoutingRule -ApplicationGateway $AppGw -Name "Rule01" -RuleType Basic -Priority 100 -BackendHttpSettings $Setting -HttpListener $Listener -BackendAddressPool $Pool
 ```
 
 The first command gets the application gateway and stores it in the $AppGw variable.

src/Network/Network/help/Add-AzApplicationGatewayRewriteRuleSet.md

@@ -24,9 +24,9 @@ The **Add-AzApplicationGatewayRewriteRuleSet** cmdlet adds a rewrite rule set to
 ## EXAMPLES
 
 ### Example 1
-```
-PS C:\> $AppGw = Get-AzApplicationGateway -Name "ApplicationGateway01" -ResourceGroupName "ResourceGroup01"
-PS C:\> $AppGw = Add-AzApplicationGatewayRewriteRuleSet -ApplicationGateway $AppGw -Name "ruleset1" -RewriteRule $rule
+```powershell
+$AppGw = Get-AzApplicationGateway -Name "ApplicationGateway01" -ResourceGroupName "ResourceGroup01"
+$AppGw = Add-AzApplicationGatewayRewriteRuleSet -ApplicationGateway $AppGw -Name "ruleset1" -RewriteRule $rule
 ```
 
 The first command gets the application gateway and stores it in the $AppGw variable.