PCB files for RPI Streamer Board
This is a main board to hold a Raspberry Pi (4) and the Hifyberry Digi2 Pro expansion board. This puts the connections I need (for me) on one side to be able to build my own streamer.
- Part 1
The internal "power supply" (Pololu S13V30F5) delivers at 5V@3A, sensor and RGB are control by part 2.
There is a temperature sensor (Sensirion SHT45) under the SoC and an additional unregulated fan connector (e.g. Noctua NF-A4x20 5V). In addition there is the possibility to connect a lighting (RGB). Furthermore, the following connections are available... USB-C (power supply), USB-A 3.0 (data, e.g. USB stick with music on it), main switch, QWIIC/StemmaQT (sensor) and an external 5V connector (for part 2).
The board can be produced here (AISLER) with the files (.brd and .sch) or by any other PCB manufacturer. -> https://aisler.net/
Vin: 2.8 - 22V
Vout: 5V (typ., min.4,85V, max.5,15V)
Iout: 3A
- .pro
Top
Bottom
Routing/Dimensions(mm)
Schematic
Schematic as .pdf at the top of the page.
Open hardware, use it, mod it, whatever you want, feel free...
Own design and layout.
v1.4 - 06.11.2023