UARTService: allow setting of buffer sizes, timeouts, and UUID

[dhalbert]

Add optional args to constructor to allow setting buffer sizes and timeouts for StreamOut and StreamIn objects.

[kevinjwalters]

Would be useful if the default value of the timeout(s) could be specifically mentioned in the documentation too.

[dhalbert]

@tannewt: I started to work on this, but encountered a problem. The StreamIn and StreamOut are initialized as class variables:

class UARTService(Service):
    # ...
    uuid = VendorUUID("6E400001-B5A3-F393-E0A9-E50E24DCCA9E")
    _server_tx = StreamOut(uuid=VendorUUID("6E400003-B5A3-F393-E0A9-E50E24DCCA9E"),
                           timeout=1.0, buffer_size=64)
    _server_rx = StreamIn(uuid=VendorUUID("6E400002-B5A3-F393-E0A9-E50E24DCCA9E"),
                          timeout=1.0, buffer_size=64)

I initially made them instance variables, without thinking much, but then the binding doesn't happen. How can we set up customized versions for an instance so the users can set the timeouts and buffer sizes?

[tannewt]

I think the easiest way would be to make them mutable after the init of CharacteristicBuffer. Once you have that, then you can set them in the init after calling super().init() which will do the binding.

[dhalbert]

But since there's a single instance of each, if there's more than one UARTService, wouldn't they step on each other if they want different values for timeout or buffer_size?

[dhalbert]

Or, do you mean change the properties of the CharacteristicBuffer objects? The buffer is allocated on instantiation, though, so we'd have to throw away the old buffer.

Is this inherent due to the descriptor protocol? Could the binding be restructured to use instances instead?

I'm worried there might be future cases where we can't make some aspect of a service mutable later.

[tannewt]

There is a single instance of each StreamIn and StreamOut but they shadow themselves with either CharacteristicBuffer or BoundWriteStream for each service that is instantiated.

The timeout and buffer sizes could be removed from StreamIn/Out completely. They could be set on the service instance before calling super().__init__() and the binding could read them.

I thought about using instances for attribute objects but opted for binding descriptors so that the service definition was consistent for all attributes.

[kevinjwalters]

Any rough ETA on this? I was using a longer timeout in a simple "protocol" and need to know whether to recode this or wait. I don't mind either way, btw.

It's ultimately for an Adafruit Learn Guide which I was hoping to finish up by 20th.

[dhalbert]

@tannewt Is this part of your addition of other kinds of buffers, or should it be done independently?

[tannewt]

I don't have a pending change for this. PacketBuffer is independent at the moment.

[dglaude]

Would it be possible to do the same thing for the uuid?
For one of my BLE device I had to duplicated your code, only changing the uuid.
Do you want this in an other issue?

[dhalbert]

@dglaude I just changed the title. Is this for the so-called "Transparent UART" service, with service UUID 49535343-FE7D-4AE5-8FA9-9FAFD205E455? I am using that here: https://github.com/adafruit/Adafruit_CircuitPython_BLE_BerryMed_Pulse_Oximeter/blob/master/adafruit_ble_berrymed_pulse_oximeter/adafruit_ble_transparent_uart.py, with just copied code, which I would like to fix eventually.

[dglaude]

The UUID of the gadget I use is 53300001-0023-4BD4-BBD5-A6920E4C5653 and the 001 is replaced by 002 for TX and 003 for RX. That vendor has various set of UUID for different model and hardware revision. But there is always that 2=TX / 3=RX change in the UUID.

Apparently it is very common for old protocol that used to be build on Bluetooth SPP (Serial Port Profile) and have evolved to BTLE where there is no real standard way to do serial communication.

I did exactly as you did for the Oximeter, but I would be happy to deduplicate the code.

The rest of the protocol are messages terminated by a semicolon, so I'll try to make a readline that do end on that rather than newline character.