Ran black, updated to pylint 2.x

.github/workflows/build.yml

@@ -40,7 +40,7 @@ jobs:
         source actions-ci/install.sh
     - name: Pip install pylint, black, & Sphinx
       run: |
-        pip install --force-reinstall pylint==1.9.2 black==19.10b0 Sphinx sphinx-rtd-theme
+        pip install --force-reinstall pylint black==19.10b0 Sphinx sphinx-rtd-theme
     - name: Library version
       run: git describe --dirty --always --tags
     - name: PyLint

.pylintrc

@@ -119,7 +119,8 @@ spelling-store-unknown-words=no
 [MISCELLANEOUS]
 
 # List of note tags to take in consideration, separated by a comma.
-notes=FIXME,XXX,TODO
+# notes=FIXME,XXX,TODO
+notes=FIXME,XXX
 
 
 [TYPECHECK]

adafruit_lis3dh.py

@@ -43,38 +43,38 @@
 
 # Register addresses:
 # pylint: disable=bad-whitespace
-_REG_OUTADC1_L   = const(0x08)
-_REG_WHOAMI      = const(0x0F)
-_REG_TEMPCFG     = const(0x1F)
-_REG_CTRL1       = const(0x20)
-_REG_CTRL3       = const(0x22)
-_REG_CTRL4       = const(0x23)
-_REG_CTRL5       = const(0x24)
-_REG_OUT_X_L     = const(0x28)
-_REG_INT1SRC     = const(0x31)
-_REG_CLICKCFG    = const(0x38)
-_REG_CLICKSRC    = const(0x39)
-_REG_CLICKTHS    = const(0x3A)
-_REG_TIMELIMIT   = const(0x3B)
+_REG_OUTADC1_L = const(0x08)
+_REG_WHOAMI = const(0x0F)
+_REG_TEMPCFG = const(0x1F)
+_REG_CTRL1 = const(0x20)
+_REG_CTRL3 = const(0x22)
+_REG_CTRL4 = const(0x23)
+_REG_CTRL5 = const(0x24)
+_REG_OUT_X_L = const(0x28)
+_REG_INT1SRC = const(0x31)
+_REG_CLICKCFG = const(0x38)
+_REG_CLICKSRC = const(0x39)
+_REG_CLICKTHS = const(0x3A)
+_REG_TIMELIMIT = const(0x3B)
 _REG_TIMELATENCY = const(0x3C)
-_REG_TIMEWINDOW  = const(0x3D)
+_REG_TIMEWINDOW = const(0x3D)
 
 # Register value constants:
-RANGE_16_G               = const(0b11)    # +/- 16g
-RANGE_8_G                = const(0b10)    # +/- 8g
-RANGE_4_G                = const(0b01)    # +/- 4g
-RANGE_2_G                = const(0b00)    # +/- 2g (default value)
-DATARATE_1344_HZ         = const(0b1001)  # 1.344 KHz
-DATARATE_400_HZ          = const(0b0111)  # 400Hz
-DATARATE_200_HZ          = const(0b0110)  # 200Hz
-DATARATE_100_HZ          = const(0b0101)  # 100Hz
-DATARATE_50_HZ           = const(0b0100)  # 50Hz
-DATARATE_25_HZ           = const(0b0011)  # 25Hz
-DATARATE_10_HZ           = const(0b0010)  # 10 Hz
-DATARATE_1_HZ            = const(0b0001)  # 1 Hz
-DATARATE_POWERDOWN       = const(0)
-DATARATE_LOWPOWER_1K6HZ  = const(0b1000)
-DATARATE_LOWPOWER_5KHZ   = const(0b1001)
+RANGE_16_G = const(0b11)  # +/- 16g
+RANGE_8_G = const(0b10)  # +/- 8g
+RANGE_4_G = const(0b01)  # +/- 4g
+RANGE_2_G = const(0b00)  # +/- 2g (default value)
+DATARATE_1344_HZ = const(0b1001)  # 1.344 KHz
+DATARATE_400_HZ = const(0b0111)  # 400Hz
+DATARATE_200_HZ = const(0b0110)  # 200Hz
+DATARATE_100_HZ = const(0b0101)  # 100Hz
+DATARATE_50_HZ = const(0b0100)  # 50Hz
+DATARATE_25_HZ = const(0b0011)  # 25Hz
+DATARATE_10_HZ = const(0b0010)  # 10 Hz
+DATARATE_1_HZ = const(0b0001)  # 1 Hz
+DATARATE_POWERDOWN = const(0)
+DATARATE_LOWPOWER_1K6HZ = const(0b1000)
+DATARATE_LOWPOWER_5KHZ = const(0b1001)
 
 # Other constants
 STANDARD_GRAVITY = 9.806
@@ -86,11 +86,12 @@
 
 class LIS3DH:
     """Driver base for the LIS3DH accelerometer."""
+
     def __init__(self, int1=None, int2=None):
         # Check device ID.
         device_id = self._read_register_byte(_REG_WHOAMI)
         if device_id != 0x33:
-            raise RuntimeError('Failed to find LIS3DH!')
+            raise RuntimeError("Failed to find LIS3DH!")
         # Reboot
         self._write_register_byte(_REG_CTRL5, 0x80)
         time.sleep(0.01)  # takes 5ms
@@ -156,7 +157,7 @@ def acceleration(self):
         elif accel_range == RANGE_2_G:
             divider = 16380
 
-        x, y, z = struct.unpack('<hhh', self._read_register(_REG_OUT_X_L | 0x80, 6))
+        x, y, z = struct.unpack("<hhh", self._read_register(_REG_OUT_X_L | 0x80, 6))
 
         # convert from Gs to m / s ^ 2 and adjust for the range
         x = (x / divider) * STANDARD_GRAVITY
@@ -201,12 +202,13 @@ def read_adc_raw(self, adc):
         value 1, 2, or 3.
         """
         if adc < 1 or adc > 3:
-            raise ValueError('ADC must be a value 1 to 3!')
+            raise ValueError("ADC must be a value 1 to 3!")
 
-        return struct.unpack('<h',
-                             self._read_register((_REG_OUTADC1_L+((adc-1)*2)) | 0x80, 2)[0:2])[0]
+        return struct.unpack(
+            "<h", self._read_register((_REG_OUTADC1_L + ((adc - 1) * 2)) | 0x80, 2)[0:2]
+        )[0]
 
-    def read_adc_mV(self, adc): # pylint: disable=invalid-name
+    def read_adc_mV(self, adc):  # pylint: disable=invalid-name
         """Read the specified analog to digital converter value in millivolts.
         ADC must be a value 1, 2, or 3.  NOTE the ADC can only measure voltages
         in the range of ~900-1200mV!
@@ -222,7 +224,7 @@ def read_adc_mV(self, adc): # pylint: disable=invalid-name
         #   x1 = 32512
         #   y0 = 1800
         #   y1 = 900
-        return 1800+(raw+32512)*(-900/65024)
+        return 1800 + (raw + 32512) * (-900 / 65024)
 
     @property
     def tapped(self):
@@ -250,8 +252,16 @@ def tapped(self):
         raw = self._read_register_byte(_REG_CLICKSRC)
         return raw & 0x40 > 0
 
-    def set_tap(self, tap, threshold, *,
-                time_limit=10, time_latency=20, time_window=255, click_cfg=None):
+    def set_tap(
+        self,
+        tap,
+        threshold,
+        *,
+        time_limit=10,
+        time_latency=20,
+        time_window=255,
+        click_cfg=None
+    ):
         """
         The tap detection parameters.
 
@@ -271,9 +281,11 @@ def set_tap(self, tap, threshold, *,
         :param int click_cfg: CLICK_CFG register value.
         """
         if (tap < 0 or tap > 2) and click_cfg is None:
-            raise ValueError('Tap must be 0 (disabled), 1 (single tap), or 2 (double tap)!')
+            raise ValueError(
+                "Tap must be 0 (disabled), 1 (single tap), or 2 (double tap)!"
+            )
         if threshold > 127 or threshold < 0:
-            raise ValueError('Threshold out of range (0-127)')
+            raise ValueError("Threshold out of range (0-127)")
 
         ctrl3 = self._read_register_byte(_REG_CTRL3)
         if tap == 0 and click_cfg is None:
@@ -315,7 +327,8 @@ class LIS3DH_I2C(LIS3DH):
     """Driver for the LIS3DH accelerometer connected over I2C."""
 
     def __init__(self, i2c, *, address=0x18, int1=None, int2=None):
-        import adafruit_bus_device.i2c_device as i2c_device
+        import adafruit_bus_device.i2c_device as i2c_device  # pylint: disable=import-outside-toplevel
+
         self._i2c = i2c_device.I2CDevice(i2c, address)
         self._buffer = bytearray(6)
         super().__init__(int1=int1, int2=int2)
@@ -338,7 +351,8 @@ class LIS3DH_SPI(LIS3DH):
     """Driver for the LIS3DH accelerometer connected over SPI."""
 
     def __init__(self, spi, cs, *, baudrate=100000, int1=None, int2=None):
-        import adafruit_bus_device.spi_device as spi_device
+        import adafruit_bus_device.spi_device as spi_device  # pylint: disable=import-outside-toplevel
+
         self._spi = spi_device.SPIDevice(spi, cs, baudrate=baudrate)
         self._buffer = bytearray(6)
         super().__init__(int1=int1, int2=int2)
@@ -349,12 +363,12 @@ def _read_register(self, register, length):
         else:
             self._buffer[0] = (register | 0xC0) & 0xFF  # Read multiple, bit 6&7 high.
         with self._spi as spi:
-            spi.write(self._buffer, start=0, end=1) # pylint: disable=no-member
-            spi.readinto(self._buffer, start=0, end=length) # pylint: disable=no-member
+            spi.write(self._buffer, start=0, end=1)  # pylint: disable=no-member
+            spi.readinto(self._buffer, start=0, end=length)  # pylint: disable=no-member
             return self._buffer
 
     def _write_register_byte(self, register, value):
         self._buffer[0] = register & 0x7F  # Write, bit 7 low.
         self._buffer[1] = value & 0xFF
         with self._spi as spi:
-            spi.write(self._buffer, start=0, end=2) # pylint: disable=no-member
+            spi.write(self._buffer, start=0, end=2)  # pylint: disable=no-member