Add two Esp32s3 bringing the total to 256.

_board/espressif_esp32s3_box.md

@@ -0,0 +1,46 @@
+---
+layout: download
+board_id: "espressif_esp32s3_devkitc_1"
+title: "ESP32-S3 Box - 16MB Flash, 8MB PSRAM"
+name: "ESP32-S3 Box"
+manufacturer: "Espressif"
+board_url: "https://www.adafruit.com/product/5290"
+board_image: "espressif_esp32s3_box.jpg"
+date_added: 2020-05-15
+family: esp32s3
+features:
+  - Wi-Fi
+  - Breadboard-Friendly
+  - Display
+  - Speaker
+---
+
+The **ESP-BOX** is a new generation AIoT development platform released by Espressif Systems. The ESP32-S3-BOX is an AIoT development board that is based on Espressif’s ESP32-S3 Wi-Fi + Bluetooth 5 (LE) SoC. The ESP32-S3-BOX provides a platform for developing the control of home appliances using Voice Assistance + touch screen controller, sensor, infrared controller, and intelligent Wi-Fi gateway.
+
+The ESP32-S3-BOX comes with pre-built firmware that supports offline voice interaction, with the SDKs and examples provided by Espressif, you will be able to develop a wide variety of AIoT applications based on the ESP32-S3-BOX such as online and offline voice assistants, voice-enabled devices, HMI touch-screen devices, control panels, multi-protocol gateways easily.
+
+**ESP-BOX features:**
+
+*   Supports far-field voice interaction with 2 mics
+*   Offline voice wake-up with high wake-up rate
+*   Offline speech commands recognition in Chinese and English languages with high recognition rate
+*   Reconfigurable voice commands in Chinese and English languages
+*   Flexible and reusable GUI framework
+*   End-to-end IoT development framework ESP-RainMaker
+*   Pmod™ compatible headers support expand peripheral modules
+
+*   For getting started with ESP32-S3-BOX, [Please refer to the Getting Started](https://github.com/espressif/esp-box/blob/master/docs/getting_started.md)
+*   For voice control and customization, [please refer to the Voice Assistance Control and Customization](https://github.com/espressif/esp-box/blob/master/docs/getting_started.md#voice-assistance-control-and-customization)
+*   For controlling the device by graphical user interface, [please refer to the GUI Guide](https://github.com/espressif/esp-box/blob/master/docs/getting_started.md#esp32-s3-box-graphical-user-interface)
+*   For more details of ESP32-S3-BOX hardware, [Please refer to ESP32-S3-BOX hardware overview](https://github.com/espressif/esp-box/blob/master/docs/hardware_overview.md)
+*   For the latest version firmware, [Please refer to the ESP32-S3-BOX firmware update](https://github.com/espressif/esp-box/blob/master/docs/firmware_update.md)
+
+**Important Note: We recommend [updating the ESP32-S3-BOX firmware](https://github.com/espressif/esp-box/blob/master/docs/firmware_update.md) when you first receive the kit to have the latest features and bugfix. Current firmware support is though ESP-IDF (not Arduino or CircuitPython/MicroPython yet)**
+
+## Purchase
+
+* [Adafruit](https://www.adafruit.com/product/5290)
+
+## Contribute
+
+Have some info to add for this board? Edit the source for this page [here](https://github.com/adafruit/circuitpython-org/edit/master/_board/{{ page.board_id }}.md).

_board/espressif_esp32s3_devkitc_1.md

@@ -0,0 +1,51 @@
+---
+layout: download
+board_id: "espressif_esp32s3_devkitc_1"
+title: "ESP32-S3-DevKitC-1 - 8MB Flash 2MB PSRAM"
+name: "ESP32-S3-DevKitC-1"
+manufacturer: "Espressif"
+board_url: "https://www.adafruit.com/product/5310"
+board_image: "espressif_devkitc.jpg"
+date_added: 2020-05-15
+family: esp32s3
+features:
+  - Wi-Fi
+  - Breadboard-Friendly
+---
+
+The ESP32-S3-DevKitC-1 is an entry-level development board equipped with ESP32-S3-WROOM-1, a general-purpose Wi-Fi + Bluetooth LE MCU module that integrates complete Wi-Fi and Bluetooth LE functions. **This version is equipped with the ESP32-S3-WROOM-1 (PCB antenna) with 8MB Flash and 2 MB PSRAM.**
+
+**Please note:** The S**3** is _similar_ to the ESP32-S**2** - but adds a dual core and Bluetooth LE (not classic!) However, there is minimal support for this dev board. For example, as of the time of this writing, there is no Arduino or CircuitPython support - only ESP IDF! Please purchase if you're doing development with the S3, and OK with stuff not working 100% out of the box.
+
+Most of the I/O pins on the module are broken out to the pin headers on both sides of this board for easy interfacing. Developers can either connect peripherals with jumper wires or mount ESP32-S3-DevKitC-1 on a breadboard. We particularly like that there's a debug UART/USB port and a separate native USB port, so you can upload/debug/USB all at once.
+
+At the core of the module is an ESP32-S3FN8, an Xtensa® 32-bit LX7 CPU that operates at up to 240 MHz. You can power off the CPU and make use of the low-power co-processor to constantly monitor the peripherals for changes or crossing of thresholds.
+
+ESP32-S3FN8 integrates a rich set of peripherals including SPI, LCD, Camera interface, UART, I2C, I2S, remote control, pulse counter, LED PWM, USB Serial/Jtag, MCPWM, SDIO host, GDMA, TWAI® controller (compatible with ISO 11898-1, i.e. CAN Specification 2.0), ADC, touch sensor, temperature sensor, timers, and watchdogs, as well as up to 45 GPIOs. It also includes a full-speed USB 1.1 On-The-Go (OTG) interface to enable USB communication
+
+There are three mutually exclusive ways to provide power to the board:
+
+*   USB-to-UART Port and ESP32-S3 USB Port (either one or both), default power supply (recommended)
+*   5V and G (GND) pins
+*   3v3 and G (GND) pins
+
+**Components:**
+
+*   **ESP32-S3-WROOM-1**: ESP32-S3-WROOM-1 is a powerful, generic Wi-Fi + Bluetooth LE MCU module that has a rich set of peripherals. It provides acceleration for neural network computing and signal processing workloads. ESP32-S3-WROOM-1 comes with a PCB antenna.
+*   **5V to 3.3V LDO**: Power regulator that converts a 5V supply into a 3.3V output.
+*   **Pin Headers**: All available GPIO pins (except for the SPI bus for flash) are broken out to the pin headers on the board for easy interfacing and programming. For details, please see [Header Block](https://docs.espressif.com/projects/esp-idf/en/latest/esp32s3/hw-reference/esp32s3/user-guide-devkitc-1.html#user-guide-s3-devkitc-1-v1-header-blocks).
+*   **USB-to-UART Port**: A Micro-USB port used for power supply to the board, for flashing applications to the chip, as well as for communication with the chip via the on-board USB-to-UART bridge.
+*   **Native ESP32-S3 USB Port**: ESP32-S3 full-speed USB OTG interface, compliant with the USB 1.1 specification. The interface is used for power supply to the board, for flashing applications to the chip, for communication with the chip using USB 1.1 protocols, as well as for JTAG debugging.
+*   **Boot Button**: Download button. Holding down **Boot** and then pressing **Reset** initiates Firmware Download mode for downloading firmware through the serial port.
+*   **Reset Button**
+*   **USB-to-UART Bridge:** Single USB-to-UART bridge chip provides transfer rates up to 3 Mbps.
+*   **RGB LED**: Addressable RGB LED, driven by GPIO48.
+*   **3.3V Power On LED**: Turns on when the USB power is connected to the board.
+
+## Purchase
+
+* [Adafruit](https://www.adafruit.com/product/5310)
+
+## Contribute
+
+Have some info to add for this board? Edit the source for this page [here](https://github.com/adafruit/circuitpython-org/edit/master/_board/{{ page.board_id }}.md).