Fix unknown boards for latest CP 7.2

_blinka/piunora.md → _blinka/diodes_delight_piunora.md

@@ -1,11 +1,11 @@
 ---
 layout: download
-board_id: "piunora"
+board_id: "diodes_delight_piunora"
 title: "Piunora Download"
 name: "Piunora"
 manufacturer: "Diodes Delight"
 board_url: "https://www.crowdsupply.com/diodes-delight/piunora"
-board_image: "piunora.jpg"
+board_image: "diodes_delight_piunora.jpg"
 download_instructions: 
 downloads_display: true
 blinka: true

_board/adafruit_esp32s2_camera.md

@@ -0,0 +1,22 @@
+---
+layout: download
+board_id: "adafruit_esp32s2_camera"
+title: "Adafruit ESP32-S2 Camera Download"
+name: "Adafruit ESP32-S2 Camera"
+manufacturer: "Adafruit"
+board_url: ""
+board_image: "adafruit_esp32s2_camera.jpg"
+date_added: 2022-2-14
+family: esp32s2
+bootloader_id: adafruit_esp32s2_camera
+downloads_display: true
+features:
+  - Wi-Fi
+---
+
+Coming Soon!
+
+## Learn More
+
+* [YouTube](https://www.youtube.com/watch?v=vQdIaJH_Trw)
+* [YouTube](https://www.youtube.com/watch?v=3qTod5rLvnw)

_board/adafruit_qtpy_esp32s3_nopsram.md

@@ -0,0 +1,25 @@
+---
+layout: download
+board_id: "adafruit_qtpy_esp32s3_nopsram"
+title: "Adafruit QT Py ESP32-S2 No PSRAM Download"
+name: "Adafruit QT Py ESP32-S2 No PSRAM"
+manufacturer: "Adafruit"
+board_url: ""
+board_image: "adafruit_qtpy_esp32s3_nopsram.jpg"
+date_added: 2022-2-14
+family: esp32s3
+bootloader_id: adafruit_qtpy_esp32s3_nopsram
+downloads_display: true
+features:
+  - STEMMA QT/QWIIC
+  - USB-C
+  - Breadboard-Friendly
+  - Wi-Fi
+---
+
+Coming Soon!
+
+## Learn More
+
+* [YouTube](https://www.youtube.com/watch?v=Hq5BsjkMBo0)
+* [YouTube](https://www.youtube.com/watch?v=py_uFAtV__s)

_board/diodes_delight_piunora.md

@@ -0,0 +1,25 @@
+---
+layout: download
+board_id: "diodes_delight_piunora"
+title: "Piunora Download"
+name: "Piunora"
+manufacturer: "Diodes Delight"
+board_url: "https://www.crowdsupply.com/diodes-delight/piunora"
+board_image: "diodes_delight_piunora.jpg"
+download_instructions: 
+date_added: 2021-2-14
+features:
+  - Wi-Fi
+  - Bluetooth/BLE
+  - STEMMA QT/QWIIC
+  - Arduino Shield Compatible
+---
+
+Piunora is a compact, easy-to-use development board for electronics prototyping with Linux. It has a familiar form factor, legible pin labels, and a design that’s well suited to space-constrained applications.
+
+As a carrier board for the [Raspberry Pi Compute Module 4](https://www.raspberrypi.org/products/compute-module-4/?variant=raspberry-pi-cm4001000) (CM4), Piunora is essentially a tiny version of the Raspberry Pi 4 Single Board Computer (SBC) with added flexibility to accommodate custom form factors. CM4-based devices like Piunora are fully compatible with software that was written for the Raspberry Pi 4, as long as that software accounts for the hardware peripherals in use. There are also versions of the CM4 that include eMMC memory, which is more reliable than a traditional SD card.
+
+It may be small, but Piunora is packed with powerful peripherals that will come in handy for rapid prototyping and embedded machine-learning applications. Examples include an HDMI port, camera-input connectors, and PCI-e support, which is not present on a standard Raspberry Pi 4. Finally, the M.2 B-Key port on the rear of the board is not only useful for SSD storage, it can also host a diverse range of PCI-e expansion boards.
+
+## Purchase
+* [Crowd Supply](https://www.crowdsupply.com/diodes-delight/piunora)

_board/espressif_esp32c3_devkitm_1_n4.md

@@ -0,0 +1,46 @@
+---
+layout: download
+board_id: "espressif_esp32c3_devkitm_1_n4"
+title: "ESP32-C3-DevKitC-1-N4 Download"
+name: "ESP32-C3-DevKitC-1-N4"
+manufacturer: "Espressif"
+board_url: "https://www.adafruit.com/product/5337"
+board_image: "espressif_esp32c3_devkitm_1_n4.jpg"
+date_added: 2022-2-14
+family: esp32c3
+features:
+  - Wi-Fi
+  - Breadboard-Friendly
+---
+
+The ESP32-C3-DevKitC-02 is an entry-level **RISC V** development board equipped with the ESP32-C3-WROOM-02, a powerful, generic Wi-Fi + Bluetooth LE MCU module that features a rich set of peripherals, yet an optimized size. It's an ideal choice for a wide variety of application scenarios related to the Internet of Things (IoT), such as embedded systems, smart homes, wearable electronics, etc. ESP32-C3-DevKitC-02 comes with a PCB antenna. **This version is equipped with the ESP32-C3-WROOM-02 with 4MB SPI Flash and no PSRAM.**
+
+**Please note:** The C**3** is *similar* to the ESP32 - but uses **RISC V** as a core, not Tensilica, and has Bluetooth LE (not classic!) However, there is minimal support for this dev board. For example, as of the time of this writing, there is no CircuitPython support - only Arduino and ESP IDF! Please purchase if you're doing development with the C3, and recognize that it's a different core than the classic ESP32s most folks have used.
+
+Most of the I/O pins on the module are broken out to the pin headers on both sides of this board for easy interfacing. Developers can either connect peripherals with jumper wires or mount ESP32-C3-DevKitC-02 on a breadboard.
+
+At the core of the module is ESP32-C3, which has a 32-bit RISC-V single-core processor. The ESP32-C3 integrates a rich set of peripherals, ranging from UART, I2C, I2S, remote control peripheral, LED PWM controller, general DMA controller, TWAI controller, USB Serial/JTAG controller, temperature sensor, and ADC. It also includes SPI, Dual SPI, and Quad SPI interfaces.
+
+There are three mutually exclusive ways to provide power to the board:
+
+- Micro-USB Port, default power supply
+- 5V and GND pin headers
+- 3V3 and GND pin headers
+
+It is recommended to use the first option: Micro-USB Port.
+
+**Components:**
+
+- **ESP32-C3-WROOM-02**: ESP32-C3-WROOM-02 from Espressif is a powerful and general-purpose RISC V module that offers Wi-Fi and Bluetooth LE coexistence. It has a PCB antenna and 4 MB SPI flash.
+- **5V to 3.3V LDO**: Power regulator that converts a 5V supply into a 3.3V output.
+- **5V Power On LED**: Turns on when the USB power is connected to the board.
+- **Pin Headers**: All available GPIO pins (except for the SPI bus for flash) are broken out to the pin headers on the board for easy interfacing and programming. For details, please see [Header Block](https://docs.espressif.com/projects/esp-idf/en/latest/esp32s3/hw-reference/esp32s3/user-guide-devkitc-1.html#user-guide-s3-devkitc-1-v1-header-blocks).
+- **Micro-USB Port**: USB interface. Power supply for the board as well as the communication interface between a computer and the ESP32-C3 chip.
+- **Boot Button**: Download button. Holding down **Boot** and then pressing **Reset** initiates Firmware Download mode for downloading firmware through the serial port.
+- **Reset Button:** Press this button to restart the system.
+- **USB-to-UART Bridge:** Single USB-to-UART bridge chip provides transfer rates up to 3 Mbps.
+- **RGB LED**: Addressable RGB LED, driven by GPIO8.
+
+## Purchase
+
+* [Adafruit](https://www.adafruit.com/product/5337)

_board/espressif_esp32s2_devkitc_1_n4r2.md

@@ -0,0 +1,47 @@
+---
+layout: download
+board_id: "espressif_esp32s2_devkitc_1_n4r2"
+title: "ESP32-S2-DevKitC-1-N4R2 Download"
+name: "ESP32-S2-DevKitC-1-N4R2"
+manufacturer: "Espressif"
+board_url: ""
+board_image: "espressif_esp32s2-devkitc-1.jpg"
+date_added: 2022-2-14
+family: esp32s2
+features:
+  - Wi-Fi
+  - Breadboard-Friendly
+---
+
+The ESP32-S3-DevKitC-1 is an entry-level development board equipped with ESP32-S3-WROOM-1, a general-purpose Wi-Fi + Bluetooth LE MCU module that integrates complete Wi-Fi and Bluetooth LE functions. **This version is equipped with the ESP32-S3-WROOM-1 (PCB antenna) with 8MB Flash and no PSRAM.**
+
+**Please note:** The S**3** is *similar* to the ESP32-S**2** - but adds a dual core and Bluetooth LE (not classic!) However, there is minimal support for this dev board. For example, as of the time of this writing, there is no Arduino or CircuitPython support - only ESP IDF! Please purchase if you're doing development with the S3, and OK with stuff not working 100% out of the box.
+
+Most of the I/O pins on the module are broken out to the pin headers on both sides of this board for easy interfacing. Developers can either connect peripherals with jumper wires or mount ESP32-S3-DevKitC-1 on a breadboard. We particularly like that there's a debug UART/USB port and a separate native USB port, so you can upload/debug/USB all at once.
+
+At the core of the module is an ESP32-S3FN8, an Xtensa® 32-bit LX7 CPU that operates at up to 240 MHz. You can power off the CPU and make use of the low-power co-processor to constantly monitor the peripherals for changes or crossing of thresholds.
+
+ESP32-S3FN8 integrates a rich set of peripherals including SPI, LCD, Camera interface, UART, I2C, I2S, remote control, pulse counter, LED PWM, USB Serial/Jtag, MCPWM, SDIO host, GDMA, TWAI® controller (compatible with ISO 11898-1, i.e. CAN Specification 2.0), ADC, touch sensor, temperature sensor, timers, and watchdogs, as well as up to 45 GPIOs. It also includes a full-speed USB 1.1 On-The-Go (OTG) interface to enable USB communication
+
+There are three mutually exclusive ways to provide power to the board:
+
+- USB-to-UART Port and ESP32-S3 USB Port (either one or both), default power supply (recommended)
+- 5V and G (GND) pins
+- 3v3 and G (GND) pins
+
+**Components:**
+
+- **ESP32-S3-WROOM-1**: ESP32-S3-WROOM-1 is a powerful, generic Wi-Fi + Bluetooth LE MCU module that has a rich set of peripherals. It provides acceleration for neural network computing and signal processing workloads. ESP32-S3-WROOM-1 comes with a PCB antenna.
+- **5V to 3.3V LDO**: Power regulator that converts a 5V supply into a 3.3V output.
+- **Pin Headers**: All available GPIO pins (except for the SPI bus for flash) are broken out to the pin headers on the board for easy interfacing and programming. For details, please see [Header Block](https://docs.espressif.com/projects/esp-idf/en/latest/esp32s3/hw-reference/esp32s3/user-guide-devkitc-1.html#user-guide-s3-devkitc-1-v1-header-blocks).
+- **USB-to-UART Port**: A Micro-USB port used for power supply to the board, for flashing applications to the chip, as well as for communication with the chip via the on-board USB-to-UART bridge.
+- **Native ESP32-S3 USB Port**: ESP32-S3 full-speed USB OTG interface, compliant with the USB 1.1 specification. The interface is used for power supply to the board, for flashing applications to the chip, for communication with the chip using USB 1.1 protocols, as well as for JTAG debugging.
+- **Boot Button**: Download button. Holding down **Boot** and then pressing **Reset** initiates Firmware Download mode for downloading firmware through the serial port.
+- **Reset Button**
+- **USB-to-UART Bridge:** Single USB-to-UART bridge chip provides transfer rates up to 3 Mbps.
+- **RGB LED**: Addressable RGB LED, driven by GPIO48.
+- **3.3V Power On LED**: Turns on when the USB power is connected to the board.
+
+## Purchase
+
+* [Adafruit](https://www.adafruit.com/product/5364)

_board/raspberrypi_zero.md

@@ -0,0 +1,28 @@
+---
+layout: download
+board_id: "raspberrypi_zero"
+title: "Raspberry Pi Zero Download"
+name: "Zero"
+manufacturer: "Raspberry Pi"
+board_url: "https://www.raspberrypi.com/products/raspberry-pi-zero/"
+board_image: "raspberry_pi_zero.jpg"
+date_added: 2022-2-14
+features:
+- 40-pin GPIO
+---
+
+**NOTE**: Not all features are supported in CircuitPython.
+
+At first glance, the Pi Zero isn't much.  It just looks like a slimmed down version of the Raspberry Pi we know and love.  But when we started to think of the possibilities - and what a well-chosen set of accessories could add - we realized the appeal.  And then we saw the price...could it be true? Yes!
+
+This is the slimmest, most pared down Raspberry Pi to date.  It's kind of like the little cousin to the Pi 2 - with just a micro SD card slot, a mini HDMI port, two micro USB ports (one for power, one for USB), and 512MB of RAM. It has a single-core 1 GHz processor chip, similar to the Pi A+ and B+.
+
+## CircuitPython
+
+These downloads are for CircuitPython standalone on the Raspberry Pi (not Blinka). There is no underlying operating system. It is in its early developments.
+
+After installing the disk image on an SD card, the normal CircuitPython USB workflow is available over the micro-B USB connector labeled "USB".
+
+
+## Purchase
+* [Adafruit](https://www.adafruit.com/product/2885)

_data/files.json

@@ -13022,11 +13022,6 @@
    }
   ]
  },
- {
-  "downloads": 39,
-  "id": "espressif_esp32s3_devkitc_1",
-  "versions": []
- },
  {
   "downloads": 0,
   "id": "espressif_esp32s3_devkitc_1_n8",
@@ -13330,11 +13325,6 @@
    }
   ]
  },
- {
-  "downloads": 39,
-  "id": "espressif_esp32s3_devkitc_1_nopsram",
-  "versions": []
- },
  {
   "downloads": 165,
   "id": "espressif_hmi_devkit_1",