Translations update from Weblate

.github/workflows/build.yml

@@ -43,6 +43,32 @@ jobs:
       run: |
         gcc --version
         python3 --version
+    - name: Translations
+      run: make check-translate
+    - name: New boards check
+      run: python3 -u ci_new_boards_check.py
+      working-directory: tools
+    - name: Duplicate USB VID/PID Check
+      run: python3 -u -m tools.ci_check_duplicate_usb_vid_pid
+    - name: Build and Validate Stubs
+      run: make check-stubs -j2
+    - uses: actions/upload-artifact@v2
+      with:
+        name: stubs
+        path: circuitpython-stubs*
+    - name: Test Documentation Build (HTML)
+      run: sphinx-build -E -W -b html -D version=${{ env.CP_VERSION }} -D release=${{ env.CP_VERSION }} . _build/html
+    - uses: actions/upload-artifact@v2
+      with:
+        name: docs
+        path: _build/html
+    - name: Test Documentation Build (LaTeX/PDF)
+      run: |
+        make latexpdf
+    - uses: actions/upload-artifact@v2
+      with:
+        name: docs
+        path: _build/latex
     - name: Build mpy-cross
       run: make -C mpy-cross -j2
     - name: Build unix port
@@ -68,32 +94,6 @@ jobs:
     - name: mpy Tests
       run: MICROPY_CPYTHON3=python3.8 MICROPY_MICROPYTHON=../ports/unix/micropython_coverage ./run-tests -j1 --via-mpy -d basics float
       working-directory: tests
-    - name: Build and Validate Stubs
-      run: make check-stubs -j2
-    - uses: actions/upload-artifact@v2
-      with:
-        name: stubs
-        path: circuitpython-stubs*
-    - name: Test Documentation Build (HTML)
-      run: sphinx-build -E -W -b html -D version=${{ env.CP_VERSION }} -D release=${{ env.CP_VERSION }} . _build/html
-    - uses: actions/upload-artifact@v2
-      with:
-        name: docs
-        path: _build/html
-    - name: Test Documentation Build (LaTeX/PDF)
-      run: |
-        make latexpdf
-    - uses: actions/upload-artifact@v2
-      with:
-        name: docs
-        path: _build/latex
-    - name: Translations
-      run: make check-translate
-    - name: New boards check
-      run: python3 -u ci_new_boards_check.py
-      working-directory: tools
-    - name: Duplicate USB VID/PID Check
-      run: python3 -u -m tools.ci_check_duplicate_usb_vid_pid
     - name: Build mpy-cross.static-raspbian
       run: make -C mpy-cross -j2 -f Makefile.static-raspbian
     - uses: actions/upload-artifact@v2

.gitmodules

@@ -152,7 +152,7 @@
 	url = https://github.com/adafruit/Adafruit_CircuitPython_RFM69.git
 [submodule "ports/esp32s2/esp-idf"]
 	path = ports/esp32s2/esp-idf
-	url = https://github.com/jepler/esp-idf.git
+	url = https://github.com/adafruit/esp-idf.git
 [submodule "ports/esp32s2/certificates/nina-fw"]
 	path = ports/esp32s2/certificates/nina-fw
 	url = https://github.com/adafruit/nina-fw.git

locale/ID.po

@@ -5,7 +5,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2020-12-14 12:59-0500\n"
+"POT-Creation-Date: 2020-12-23 23:04-0500\n"
 "PO-Revision-Date: 2020-10-10 23:51+0000\n"
 "Last-Translator: oon arfiandwi <[email protected]>\n"
 "Language-Team: LANGUAGE <[email protected]>\n"
@@ -19,10 +19,14 @@ msgstr ""
 #: main.c
 msgid ""
 "\n"
-"Code done running. Waiting for reload.\n"
+"Code done running.\n"
 msgstr ""
+
+#: main.c
+msgid ""
 "\n"
-"Kode selesai berjalan. Menunggu memuat ulang.\n"
+"Code stopped by auto-reload.\n"
+msgstr ""
 
 #: supervisor/shared/safe_mode.c
 msgid ""
@@ -540,6 +544,18 @@ msgstr "Blok CBC harus merupakan kelipatan 16 byte"
 msgid "Call super().__init__() before accessing native object."
 msgstr "Panggil super().__init__() sebelum mengakses objek asli."
 
+#: ports/esp32s2/common-hal/alarm/pin/PinAlarm.c
+msgid "Can only alarm on RTC IO from deep sleep."
+msgstr ""
+
+#: ports/esp32s2/common-hal/alarm/pin/PinAlarm.c
+msgid "Can only alarm on one low pin while others alarm high from deep sleep."
+msgstr ""
+
+#: ports/esp32s2/common-hal/alarm/pin/PinAlarm.c
+msgid "Can only alarm on two low pins from deep sleep."
+msgstr ""
+
 #: ports/nrf/common-hal/_bleio/Characteristic.c
 msgid "Can't set CCCD on local Characteristic"
 msgstr "Tidak dapat mengatur CCCD pada Karakteristik lokal"
@@ -576,6 +592,10 @@ msgstr ""
 "Tidak dapat menggunakan output di kedua channel dengan menggunakan pin yang "
 "sama"
 
+#: ports/esp32s2/common-hal/alarm/pin/PinAlarm.c
+msgid "Cannot pull on input-only pin."
+msgstr ""
+
 #: shared-module/bitbangio/SPI.c
 msgid "Cannot read without MISO pin."
 msgstr "Tidak dapat membaca tanpa pin MISO."
@@ -623,6 +643,10 @@ msgstr ""
 "Tidak dapat membuat variasi frekuensi pada penghitung waktu yang sudah "
 "digunakan"
 
+#: ports/esp32s2/common-hal/alarm/pin/PinAlarm.c
+msgid "Cannot wake on pin edge. Only level."
+msgstr ""
+
 #: shared-module/bitbangio/SPI.c
 msgid "Cannot write without MOSI pin."
 msgstr "Tidak dapat menulis tanpa pin MOSI."
@@ -954,6 +978,10 @@ msgstr "File sudah ada"
 msgid "Filters too complex"
 msgstr ""
 
+#: ports/esp32s2/common-hal/dualbank/__init__.c
+msgid "Firmware image is invalid"
+msgstr ""
+
 #: ports/cxd56/common-hal/camera/Camera.c
 msgid "Format not supported"
 msgstr ""
@@ -963,11 +991,6 @@ msgstr ""
 msgid "Framebuffer requires %d bytes"
 msgstr ""
 
-#: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
-msgid "Frequency captured is above capability. Capture Paused."
-msgstr ""
-"Frekuensi yang ditangkap berada di atas kemampuan. Penangkapan Ditunda."
-
 #: ports/stm/common-hal/pwmio/PWMOut.c
 msgid "Frequency must match existing PWMOut using this timer"
 msgstr "Frekuensi harus cocok dengan PWMOut yang ada menggunakan timer ini"
@@ -1485,7 +1508,7 @@ msgstr ""
 "Hanya monokrom, 4bpp atau 8bpp yang diindeks, dan 16bpp atau lebih yang "
 "didukung: %d bpp diberikan"
 
-#: ports/esp32s2/common-hal/alarm/__init__.c
+#: ports/esp32s2/common-hal/alarm/time/TimeAlarm.c
 msgid "Only one alarm.time alarm can be set."
 msgstr ""
 
@@ -1549,10 +1572,6 @@ msgstr "Pin harus mendukung interupsi perangkat keras"
 msgid "Pin number already reserved by EXTI"
 msgstr "Nomor pin sudah dipesan oleh EXTI"
 
-#: ports/esp32s2/common-hal/alarm/__init__.c
-msgid "PinAlarm not yet implemented"
-msgstr ""
-
 #: shared-bindings/rgbmatrix/RGBMatrix.c
 #, c-format
 msgid ""
@@ -1596,7 +1615,7 @@ msgid "Press any key to enter the REPL. Use CTRL-D to reload.\n"
 msgstr ""
 
 #: main.c
-msgid "Pretending to deep sleep until alarm, any key or file write.\n"
+msgid "Pretending to deep sleep until alarm, CTRL-C or file write.\n"
 msgstr ""
 
 #: shared-bindings/digitalio/DigitalInOut.c
@@ -2021,6 +2040,10 @@ msgstr ""
 msgid "Unsupported pull value."
 msgstr ""
 
+#: ports/esp32s2/common-hal/dualbank/__init__.c
+msgid "Update Failed"
+msgstr ""
+
 #: ports/nrf/common-hal/_bleio/Characteristic.c
 #: ports/nrf/common-hal/_bleio/Descriptor.c
 msgid "Value length != required fixed length"
@@ -3046,7 +3069,7 @@ msgid "max_length must be 0-%d when fixed_length is %s"
 msgstr ""
 
 #: shared-bindings/_bleio/Characteristic.c shared-bindings/_bleio/Descriptor.c
-msgid "max_length must be > 0"
+msgid "max_length must be >= 0"
 msgstr ""
 
 #: extmod/ulab/code/ndarray.c
@@ -3184,6 +3207,14 @@ msgstr "non-keyword arg setelah */**"
 msgid "non-keyword arg after keyword arg"
 msgstr "non-keyword arg setelah keyword arg"
 
+#: ports/nrf/common-hal/_bleio/Adapter.c
+msgid "non-zero timeout must be > 0.01"
+msgstr ""
+
+#: shared-bindings/_bleio/Adapter.c
+msgid "non-zero timeout must be >= interval"
+msgstr ""
+
 #: extmod/ulab/code/linalg/linalg.c
 msgid "norm is defined for 1D and 2D arrays"
 msgstr ""
@@ -3256,6 +3287,10 @@ msgstr "panjang data string memiliki keganjilan (odd-length)"
 msgid "offset is too large"
 msgstr ""
 
+#: shared-bindings/dualbank/__init__.c
+msgid "offset must be >= 0"
+msgstr ""
+
 #: py/objstr.c py/objstrunicode.c
 #, fuzzy
 msgid "offset out of bounds"
@@ -3602,6 +3637,10 @@ msgstr ""
 msgid "timeout must be 0.0-100.0 seconds"
 msgstr ""
 
+#: ports/nrf/common-hal/_bleio/Adapter.c
+msgid "timeout must be < 655.35 secs"
+msgstr ""
+
 #: shared-bindings/_bleio/CharacteristicBuffer.c
 #, fuzzy
 msgid "timeout must be >= 0.0"
@@ -3862,6 +3901,17 @@ msgstr ""
 msgid "zi must be of shape (n_section, 2)"
 msgstr ""
 
+#~ msgid ""
+#~ "\n"
+#~ "Code done running. Waiting for reload.\n"
+#~ msgstr ""
+#~ "\n"
+#~ "Kode selesai berjalan. Menunggu memuat ulang.\n"
+
+#~ msgid "Frequency captured is above capability. Capture Paused."
+#~ msgstr ""
+#~ "Frekuensi yang ditangkap berada di atas kemampuan. Penangkapan Ditunda."
+
 #~ msgid "Press any key to enter the REPL. Use CTRL-D to reload."
 #~ msgstr ""
 #~ "Tekan tombol apa saja untuk masuk ke dalam REPL. Gunakan CTRL+D untuk "