Create tests/_manual, add Socket tests

tests/circuitpython-manual/socketpool/client/cpy-client.py

@@ -0,0 +1,26 @@
+import wifi
+import socketpool
+import ssl
+import time
+
+TIMEOUT = None
+HOST = '192.168.10.179'
+PORT = 5000
+
+# Connect to wifi
+print("Connecting to wifi")
+wifi.radio.connect("mySSID", "myPASS")
+pool = socketpool.SocketPool(wifi.radio)
+
+print("Creating Socket")
+with pool.socket(pool.AF_INET, pool.SOCK_STREAM) as s:
+    s.settimeout(TIMEOUT)
+
+    print("Connecting")
+    s.connect((HOST, PORT))
+    print("Sending")
+    sent = s.send(b'Hello, world')
+    print("Receiving")
+    buff = bytearray(128)
+    numbytes = s.recv_into(buff)
+print(repr(buff))

tests/circuitpython-manual/socketpool/client/host-server.py

@@ -0,0 +1,27 @@
+#!/usr/bin/env python3
+import socket
+
+TIMEOUT = 10
+HOST = "192.168.10.179"
+PORT = 5000
+
+print("Create Socket")
+with socket.socket(socket.AF_INET, socket.SOCK_STREAM) as s:
+    s.settimeout(TIMEOUT)
+    s.bind((HOST, PORT))
+    s.listen()
+    print("Accepting connections")
+    while True:
+        try:
+            conn, addr = s.accept()
+            break
+        except BlockingIOError:
+            pass
+
+    with conn:
+        s.settimeout(TIMEOUT)
+        print('Connected by', addr)
+        data = conn.recv(128)
+        print("got: " + str(data))
+        conn.sendall(data)
+        print("sent: " + str(data))

tests/circuitpython-manual/socketpool/client/readme.md

@@ -0,0 +1,46 @@
+# Circuitpython as Client
+
+This example demonstrates the use of Socket as a client, accessing a server on a host development machine. This Circuitpython sketch uses the Connect, Send, and Recv_Into methods.
+
+## Prerequisites
+
+Circuitpython V6.2.0 minimum. Neither the host or client sketch has installed module prerequisites.
+
+## Setup
+
+Find a viable IP address for the host machine first and insert it in both sketches as HOST. On mac, this can be done by going to System Preferences/Network and checking the IP address used to connect to the local wireless network. Make sure that both devices are using the same WIFI!
+
+Each sketch can have Timeout values changed. The host sketch usually needs a value above 0, or the recv() will fail. Currently, Circuitpython's Connect function is always blocking, so changing the client timeout will not cause much change in behavior.
+
+Start the Server on the host PC first, within this folder:
+
+```
+python host-server.py
+```
+
+Then, reload the client sketch in Circuitpython.
+
+## Expected Behavior
+
+The example should connect to a server running on the host machine. The client will send a "Hello world" string to the server, which will return it.
+
+Expected client output:
+
+```
+Connecting to wifi
+Creating Socket
+Connecting
+Sending
+Receiving
+bytearray(b'Hello, world')
+```
+
+Expected Server output (IP/port values will vary):
+
+```
+Create Socket
+Accepting connections
+Connected by ('192.168.10.128', 64509)
+got: b'Hello, world'
+sent: b'Hello, world'
+```

tests/circuitpython-manual/socketpool/datagram/ntp.py

@@ -0,0 +1,28 @@
+import wifi
+import socketpool
+import struct
+import time
+
+# connect to wifi
+print("Connecting to Wifi")
+wifi.radio.connect("mySSID", "myPASS")
+pool = socketpool.SocketPool(wifi.radio)
+
+# make socket
+print("Creating socket")
+sock = pool.socket(pool.AF_INET,pool.SOCK_DGRAM)
+
+# Fill packet
+packet = bytearray(48)
+packet[0] = 0b00100011  # Not leap second, NTP version 4, Client mode
+NTP_TO_UNIX_EPOCH = 2208988800  # 1970-01-01 00:00:00
+
+print("Sending packet")
+sock.sendto(packet, ("pool.ntp.org", 123))
+
+size, address = sock.recvfrom_into(packet)
+print("Received packet")
+
+seconds = struct.unpack_from("!I", packet, offset=len(packet) - 8)[0]
+print("Address:", address)
+print("Time:", time.localtime(seconds - NTP_TO_UNIX_EPOCH))

tests/circuitpython-manual/socketpool/datagram/readme.md

@@ -0,0 +1,19 @@
+# Circuitpython Datagrams
+
+This example demonstrates using UDP (datagrams) with the Socket module, accessing the time from an NTP server using `sendto` and `recvfrom_into`.
+
+## Prerequisites
+
+Circuitpython V6.2.0 minimum.
+
+## Expected behavior
+
+The Circuitpython device will attempt to connect to wifi, and send a request for the time to `pool.ntp.org`. It will then convert the seconds returned into a unix time struct.
+
+Expected output:
+```
+Sending packet
+Received packet
+Address: ('82.197.188.130', 31488)
+Time: struct_time(tm_year=2021, tm_mon=2, tm_mday=11, tm_hour=22, tm_min=22, tm_sec=40, tm_wday=3, tm_yday=42, tm_isdst=-1)
+```

tests/circuitpython-manual/socketpool/server/cpy-server.py

@@ -0,0 +1,31 @@
+import wifi
+import socketpool
+
+TIMEOUT = None
+
+print("Connecting to Wifi")
+wifi.radio.connect("mySSID", "myPASS")
+
+pool = socketpool.SocketPool(wifi.radio)
+
+print("Finding IP address")
+print(wifi.radio.ipv4_address)
+HOST = str(wifi.radio.ipv4_address)
+PORT = 80        # Port to listen on
+
+print("Creating socket")
+sock = pool.socket(pool.AF_INET,pool.SOCK_STREAM)
+
+sock.bind((HOST, PORT))
+sock.listen(1)
+print("Accepting connections")
+conn, addr = sock.accept()
+with conn:
+    print('Connected by', addr)
+    buff = bytearray(128)
+    print("Receiving")
+    numbytes = conn.recvfrom_into(buff)
+    print(buff[:numbytes[0]])
+    if numbytes:
+        print("Sending")
+        conn.send(buff[:numbytes[0]])

tests/circuitpython-manual/socketpool/server/host-client.py

@@ -0,0 +1,17 @@
+import socket
+
+HOST = '192.168.10.128'  # The server's hostname or IP address
+PORT = 80        # The port used by the server
+
+with socket.socket(socket.AF_INET, socket.SOCK_STREAM) as s:
+    s.settimeout(None)
+
+    print("Connecting")
+    s.connect((HOST, PORT))
+
+    print("Sending")
+    s.send(b'Hello, world')
+
+    print("Receiving")
+    data = s.recv(1024)
+    print('Received', repr(data))

tests/circuitpython-manual/socketpool/server/readme.md

@@ -0,0 +1,43 @@
+# Circuitpython as Client
+
+This example demonstrates the use of Socket as a server, accessed by a client program on a host development machine. This Circuitpython sketch uses the Bind, Listen, Accept, and recvfrom_into calls.
+
+## Prerequisites
+
+Circuitpython V6.2.0 minimum. Neither the host or client sketch has installed module prerequisites.
+
+## Setup
+
+Make sure that both devices are using the same WIFI! The Circuitpython Server will automatically pick an IP and print it over the CDC monitor. Copy this value into the host client sketch. Start the Server on Circuitpython first, then run the client sketch in this folder:
+
+```
+python host-client.py
+```
+
+Each sketch can have Timeout values changed.
+
+## Expected behavior
+
+The host machine will connect to the server running on the Circuitpython device, and send a "Hello, world" string which is then returned.
+
+Expected client output:
+
+```
+Connecting
+Sending
+Receiving
+Received b'Hello, world'
+```
+
+Expected server output:
+```
+Connecting to Wifi
+Finding IP address
+192.168.10.128
+Creating socket
+Accepting connections
+Connected by ('192.168.10.179', 33274)
+Receiving
+bytearray(b'Hello, world')
+Sending
+```