Add MixGo CE board

.gitmodules

@@ -289,3 +289,6 @@
 [submodule "frozen/pew-pewpew-lcd"]
 	path = frozen/pew-pewpew-lcd
 	url = https://github.com/pypewpew/pew-pewpew-lcd.git
+[submodule "ports/espressif/boards/mixgo_ce_udisk/cp_lib"]
+	path = ports/espressif/boards/mixgo_ce_udisk/cp_lib
+	url = https://github.com/dahanzimin/circuitpython_lib.git

ports/espressif/boards/mixgo_ce_serial/board.c

@@ -0,0 +1,70 @@
+/*
+ * This file is part of the MicroPython project, http://micropython.org/
+ *
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2020 Scott Shawcroft for Adafruit Industries
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include "supervisor/board.h"
+#include "mpconfigboard.h"
+#include "shared-bindings/microcontroller/Pin.h"
+
+#include "lib/oofatfs/ff.h"
+#include "extmod/vfs_fat.h"
+#include "py/mpstate.h"
+
+void board_init(void) {
+    // Debug UART
+    #ifdef DEBUG
+    common_hal_never_reset_pin(&pin_GPIO43);
+    common_hal_never_reset_pin(&pin_GPIO44);
+    #endif /* DEBUG */
+
+    mp_import_stat_t stat_b = mp_import_stat("boot.py");
+    if (stat_b != MP_IMPORT_STAT_FILE) {
+        FATFS *fatfs = &((fs_user_mount_t *)MP_STATE_VM(vfs_mount_table)->obj)->fatfs;
+        FIL fs;
+        UINT char_written = 0;
+        const byte buffer[] = "#Serial port upload mode\nimport storage\nstorage.remount(\"/\", False)\nstorage.disable_usb_drive()\n";
+        // Create or modify existing boot.py file
+        f_open(fatfs, &fs, "/boot.py", FA_WRITE | FA_CREATE_ALWAYS);
+        f_write(&fs, buffer, sizeof(buffer) - 1, &char_written);
+        f_close(&fs);
+        // Delete code.Py, use main.py
+        mp_import_stat_t stat_c = mp_import_stat("code.py");
+        if (stat_c == MP_IMPORT_STAT_FILE) {
+            f_unlink(fatfs,"/code.py");
+        }
+    }
+
+}
+
+bool board_requests_safe_mode(void) {
+    return false;
+}
+
+void reset_board(void) {
+
+}
+
+void board_deinit(void) {
+}

ports/espressif/boards/mixgo_ce_serial/mpconfigboard.h

@@ -0,0 +1,32 @@
+/*
+ * This file is part of the MicroPython project, http://micropython.org/
+ *
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2019 Scott Shawcroft for Adafruit Industries
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+// Micropython setup
+
+#define MICROPY_HW_BOARD_NAME       "MixGo CE"
+#define MICROPY_HW_MCU_NAME         "ESP32S2"
+
+#define MICROPY_HW_NEOPIXEL (&pin_GPIO45)

ports/espressif/boards/mixgo_ce_serial/mpconfigboard.mk

@@ -0,0 +1,23 @@
+USB_VID = 0x303A
+USB_PID = 0x80FD
+USB_PRODUCT = "MixGo CE"
+USB_MANUFACTURER = "Espressif"
+
+IDF_TARGET = esp32s2
+
+INTERNAL_FLASH_FILESYSTEM = 1
+LONGINT_IMPL = MPZ
+
+# The default queue depth of 16 overflows on release builds,
+# so increase it to 32.
+CFLAGS += -DCFG_TUD_TASK_QUEUE_SZ=32
+
+CIRCUITPY_ESP_FLASH_MODE=dio
+CIRCUITPY_ESP_FLASH_FREQ=40m
+CIRCUITPY_ESP_FLASH_SIZE=4MB
+
+CIRCUITPY_MODULE=wroom
+
+FROZEN_MPY_DIRS += $(TOP)/frozen/Adafruit_CircuitPython_Requests
+FROZEN_MPY_DIRS += $(TOP)/frozen/Adafruit_CircuitPython_NeoPixel
+FROZEN_MPY_DIRS += boards/mixgo_ce_udisk/cp_lib/mixgoce_lib

ports/espressif/boards/mixgo_ce_serial/pins.c

@@ -0,0 +1,50 @@
+#include "shared-bindings/board/__init__.h"
+
+STATIC const mp_rom_map_elem_t board_module_globals_table[] = {
+    CIRCUITPYTHON_BOARD_DICT_STANDARD_ITEMS
+
+    { MP_ROM_QSTR(MP_QSTR_IO0), MP_ROM_PTR(&pin_GPIO0) },
+    { MP_ROM_QSTR(MP_QSTR_IO1), MP_ROM_PTR(&pin_GPIO1) },
+    { MP_ROM_QSTR(MP_QSTR_IO2), MP_ROM_PTR(&pin_GPIO2) },
+    { MP_ROM_QSTR(MP_QSTR_IO3), MP_ROM_PTR(&pin_GPIO3) },
+    { MP_ROM_QSTR(MP_QSTR_IO4), MP_ROM_PTR(&pin_GPIO4) },
+    { MP_ROM_QSTR(MP_QSTR_IO5), MP_ROM_PTR(&pin_GPIO5) },
+    { MP_ROM_QSTR(MP_QSTR_IO6), MP_ROM_PTR(&pin_GPIO6) },
+    { MP_ROM_QSTR(MP_QSTR_IO7), MP_ROM_PTR(&pin_GPIO7) },
+    { MP_ROM_QSTR(MP_QSTR_IO8), MP_ROM_PTR(&pin_GPIO8) },
+    { MP_ROM_QSTR(MP_QSTR_IO9), MP_ROM_PTR(&pin_GPIO9) },
+    { MP_ROM_QSTR(MP_QSTR_IO10), MP_ROM_PTR(&pin_GPIO10) },
+    { MP_ROM_QSTR(MP_QSTR_IO11), MP_ROM_PTR(&pin_GPIO11) },
+    { MP_ROM_QSTR(MP_QSTR_IO12), MP_ROM_PTR(&pin_GPIO12) },
+    { MP_ROM_QSTR(MP_QSTR_IO13), MP_ROM_PTR(&pin_GPIO13) },
+    { MP_ROM_QSTR(MP_QSTR_IO14), MP_ROM_PTR(&pin_GPIO14) },
+    { MP_ROM_QSTR(MP_QSTR_IO15), MP_ROM_PTR(&pin_GPIO15) },
+    { MP_ROM_QSTR(MP_QSTR_IO16), MP_ROM_PTR(&pin_GPIO16) },
+    { MP_ROM_QSTR(MP_QSTR_IO17), MP_ROM_PTR(&pin_GPIO17) },
+
+
+    { MP_ROM_QSTR(MP_QSTR_IO18), MP_ROM_PTR(&pin_GPIO18) },
+    { MP_ROM_QSTR(MP_QSTR_IO19), MP_ROM_PTR(&pin_GPIO19) },
+    { MP_ROM_QSTR(MP_QSTR_IO20), MP_ROM_PTR(&pin_GPIO20) },
+    { MP_ROM_QSTR(MP_QSTR_IO21), MP_ROM_PTR(&pin_GPIO21) },
+    { MP_ROM_QSTR(MP_QSTR_IO26), MP_ROM_PTR(&pin_GPIO26) },
+    { MP_ROM_QSTR(MP_QSTR_IO33), MP_ROM_PTR(&pin_GPIO33) },
+    { MP_ROM_QSTR(MP_QSTR_IO34), MP_ROM_PTR(&pin_GPIO34) },
+    { MP_ROM_QSTR(MP_QSTR_IO35), MP_ROM_PTR(&pin_GPIO35) },
+    { MP_ROM_QSTR(MP_QSTR_IO36), MP_ROM_PTR(&pin_GPIO36) },
+    { MP_ROM_QSTR(MP_QSTR_IO37), MP_ROM_PTR(&pin_GPIO37) },
+    { MP_ROM_QSTR(MP_QSTR_IO38), MP_ROM_PTR(&pin_GPIO38) },
+    { MP_ROM_QSTR(MP_QSTR_IO39), MP_ROM_PTR(&pin_GPIO39) },
+    { MP_ROM_QSTR(MP_QSTR_IO40), MP_ROM_PTR(&pin_GPIO40) },
+    { MP_ROM_QSTR(MP_QSTR_IO41), MP_ROM_PTR(&pin_GPIO41) },
+    { MP_ROM_QSTR(MP_QSTR_IO42), MP_ROM_PTR(&pin_GPIO42) },
+    { MP_ROM_QSTR(MP_QSTR_TX), MP_ROM_PTR(&pin_GPIO43) },
+    { MP_ROM_QSTR(MP_QSTR_IO43), MP_ROM_PTR(&pin_GPIO43) },
+    { MP_ROM_QSTR(MP_QSTR_RX), MP_ROM_PTR(&pin_GPIO44) },
+    { MP_ROM_QSTR(MP_QSTR_IO44), MP_ROM_PTR(&pin_GPIO44) },
+    { MP_ROM_QSTR(MP_QSTR_IO45), MP_ROM_PTR(&pin_GPIO45) },
+    { MP_ROM_QSTR(MP_QSTR_IO46), MP_ROM_PTR(&pin_GPIO46) },
+
+    { MP_ROM_QSTR(MP_QSTR_NEOPIXEL), MP_ROM_PTR(&pin_GPIO45) },
+};
+MP_DEFINE_CONST_DICT(board_module_globals, board_module_globals_table);

ports/espressif/boards/mixgo_ce_serial/sdkconfig

@@ -0,0 +1,6 @@
+# CONFIG_ESP32S2_SPIRAM_SUPPORT is not set
+#
+# LWIP
+#
+CONFIG_LWIP_LOCAL_HOSTNAME="espressif"
+# end of LWIP

ports/espressif/boards/mixgo_ce_udisk/board.c

@@ -0,0 +1,48 @@
+/*
+ * This file is part of the MicroPython project, http://micropython.org/
+ *
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2020 Scott Shawcroft for Adafruit Industries
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include "supervisor/board.h"
+#include "mpconfigboard.h"
+#include "shared-bindings/microcontroller/Pin.h"
+
+void board_init(void) {
+    // Debug UART
+    #ifdef DEBUG
+    common_hal_never_reset_pin(&pin_GPIO43);
+    common_hal_never_reset_pin(&pin_GPIO44);
+    #endif /* DEBUG */
+}
+
+bool board_requests_safe_mode(void) {
+    return false;
+}
+
+void reset_board(void) {
+
+}
+
+void board_deinit(void) {
+}

ports/espressif/boards/mixgo_ce_udisk/mpconfigboard.h

@@ -0,0 +1,32 @@
+/*
+ * This file is part of the MicroPython project, http://micropython.org/
+ *
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2019 Scott Shawcroft for Adafruit Industries
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+// Micropython setup
+
+#define MICROPY_HW_BOARD_NAME       "MixGo CE"
+#define MICROPY_HW_MCU_NAME         "ESP32S2"
+
+#define MICROPY_HW_NEOPIXEL (&pin_GPIO45)

ports/espressif/boards/mixgo_ce_udisk/mpconfigboard.mk

@@ -0,0 +1,23 @@
+USB_VID = 0x303A
+USB_PID = 0x80FC
+USB_PRODUCT = "MixGo CE"
+USB_MANUFACTURER = "Espressif"
+
+IDF_TARGET = esp32s2
+
+INTERNAL_FLASH_FILESYSTEM = 1
+LONGINT_IMPL = MPZ
+
+# The default queue depth of 16 overflows on release builds,
+# so increase it to 32.
+CFLAGS += -DCFG_TUD_TASK_QUEUE_SZ=32
+
+CIRCUITPY_ESP_FLASH_MODE=dio
+CIRCUITPY_ESP_FLASH_FREQ=40m
+CIRCUITPY_ESP_FLASH_SIZE=4MB
+
+CIRCUITPY_MODULE=wroom
+
+FROZEN_MPY_DIRS += $(TOP)/frozen/Adafruit_CircuitPython_Requests
+FROZEN_MPY_DIRS += $(TOP)/frozen/Adafruit_CircuitPython_NeoPixel
+FROZEN_MPY_DIRS += boards/$(BOARD)/cp_lib/mixgoce_lib

ports/espressif/boards/mixgo_ce_udisk/pins.c

@@ -0,0 +1,50 @@
+#include "shared-bindings/board/__init__.h"
+
+STATIC const mp_rom_map_elem_t board_module_globals_table[] = {
+    CIRCUITPYTHON_BOARD_DICT_STANDARD_ITEMS
+
+    { MP_ROM_QSTR(MP_QSTR_IO0), MP_ROM_PTR(&pin_GPIO0) },
+    { MP_ROM_QSTR(MP_QSTR_IO1), MP_ROM_PTR(&pin_GPIO1) },
+    { MP_ROM_QSTR(MP_QSTR_IO2), MP_ROM_PTR(&pin_GPIO2) },
+    { MP_ROM_QSTR(MP_QSTR_IO3), MP_ROM_PTR(&pin_GPIO3) },
+    { MP_ROM_QSTR(MP_QSTR_IO4), MP_ROM_PTR(&pin_GPIO4) },
+    { MP_ROM_QSTR(MP_QSTR_IO5), MP_ROM_PTR(&pin_GPIO5) },
+    { MP_ROM_QSTR(MP_QSTR_IO6), MP_ROM_PTR(&pin_GPIO6) },
+    { MP_ROM_QSTR(MP_QSTR_IO7), MP_ROM_PTR(&pin_GPIO7) },
+    { MP_ROM_QSTR(MP_QSTR_IO8), MP_ROM_PTR(&pin_GPIO8) },
+    { MP_ROM_QSTR(MP_QSTR_IO9), MP_ROM_PTR(&pin_GPIO9) },
+    { MP_ROM_QSTR(MP_QSTR_IO10), MP_ROM_PTR(&pin_GPIO10) },
+    { MP_ROM_QSTR(MP_QSTR_IO11), MP_ROM_PTR(&pin_GPIO11) },
+    { MP_ROM_QSTR(MP_QSTR_IO12), MP_ROM_PTR(&pin_GPIO12) },
+    { MP_ROM_QSTR(MP_QSTR_IO13), MP_ROM_PTR(&pin_GPIO13) },
+    { MP_ROM_QSTR(MP_QSTR_IO14), MP_ROM_PTR(&pin_GPIO14) },
+    { MP_ROM_QSTR(MP_QSTR_IO15), MP_ROM_PTR(&pin_GPIO15) },
+    { MP_ROM_QSTR(MP_QSTR_IO16), MP_ROM_PTR(&pin_GPIO16) },
+    { MP_ROM_QSTR(MP_QSTR_IO17), MP_ROM_PTR(&pin_GPIO17) },
+
+
+    { MP_ROM_QSTR(MP_QSTR_IO18), MP_ROM_PTR(&pin_GPIO18) },
+    { MP_ROM_QSTR(MP_QSTR_IO19), MP_ROM_PTR(&pin_GPIO19) },
+    { MP_ROM_QSTR(MP_QSTR_IO20), MP_ROM_PTR(&pin_GPIO20) },
+    { MP_ROM_QSTR(MP_QSTR_IO21), MP_ROM_PTR(&pin_GPIO21) },
+    { MP_ROM_QSTR(MP_QSTR_IO26), MP_ROM_PTR(&pin_GPIO26) },
+    { MP_ROM_QSTR(MP_QSTR_IO33), MP_ROM_PTR(&pin_GPIO33) },
+    { MP_ROM_QSTR(MP_QSTR_IO34), MP_ROM_PTR(&pin_GPIO34) },
+    { MP_ROM_QSTR(MP_QSTR_IO35), MP_ROM_PTR(&pin_GPIO35) },
+    { MP_ROM_QSTR(MP_QSTR_IO36), MP_ROM_PTR(&pin_GPIO36) },
+    { MP_ROM_QSTR(MP_QSTR_IO37), MP_ROM_PTR(&pin_GPIO37) },
+    { MP_ROM_QSTR(MP_QSTR_IO38), MP_ROM_PTR(&pin_GPIO38) },
+    { MP_ROM_QSTR(MP_QSTR_IO39), MP_ROM_PTR(&pin_GPIO39) },
+    { MP_ROM_QSTR(MP_QSTR_IO40), MP_ROM_PTR(&pin_GPIO40) },
+    { MP_ROM_QSTR(MP_QSTR_IO41), MP_ROM_PTR(&pin_GPIO41) },
+    { MP_ROM_QSTR(MP_QSTR_IO42), MP_ROM_PTR(&pin_GPIO42) },
+    { MP_ROM_QSTR(MP_QSTR_TX), MP_ROM_PTR(&pin_GPIO43) },
+    { MP_ROM_QSTR(MP_QSTR_IO43), MP_ROM_PTR(&pin_GPIO43) },
+    { MP_ROM_QSTR(MP_QSTR_RX), MP_ROM_PTR(&pin_GPIO44) },
+    { MP_ROM_QSTR(MP_QSTR_IO44), MP_ROM_PTR(&pin_GPIO44) },
+    { MP_ROM_QSTR(MP_QSTR_IO45), MP_ROM_PTR(&pin_GPIO45) },
+    { MP_ROM_QSTR(MP_QSTR_IO46), MP_ROM_PTR(&pin_GPIO46) },
+
+    { MP_ROM_QSTR(MP_QSTR_NEOPIXEL), MP_ROM_PTR(&pin_GPIO45) },
+};
+MP_DEFINE_CONST_DICT(board_module_globals, board_module_globals_table);

ports/espressif/boards/mixgo_ce_udisk/sdkconfig

@@ -0,0 +1,6 @@
+# CONFIG_ESP32S2_SPIRAM_SUPPORT is not set
+#
+# LWIP
+#
+CONFIG_LWIP_LOCAL_HOSTNAME="espressif"
+# end of LWIP