Translations update from Hosted Weblate

locale/ID.po

@@ -2082,8 +2082,8 @@ msgid "Too many channels in sample."
 msgstr "Terlalu banyak channel dalam sampel"
 
 #: shared-module/displayio/__init__.c
-msgid "Too many display busses"
-msgstr "Terlalu banyak tampilan bus"
+msgid "Too many display busses; forgot displayio.release_displays() ?"
+msgstr ""
 
 #: shared-module/displayio/__init__.c
 msgid "Too many displays"
@@ -4390,6 +4390,9 @@ msgstr "zi harus berjenis float"
 msgid "zi must be of shape (n_section, 2)"
 msgstr "Zi harus berbentuk (n_section, 2)"
 
+#~ msgid "Too many display busses"
+#~ msgstr "Terlalu banyak tampilan bus"
+
 #~ msgid "Hardware busy, try alternative pins"
 #~ msgstr "Perangkat keras sibuk, coba pin alternatif"
 

locale/cs.po

@@ -2071,7 +2071,7 @@ msgid "Too many channels in sample."
 msgstr ""
 
 #: shared-module/displayio/__init__.c
-msgid "Too many display busses"
+msgid "Too many display busses; forgot displayio.release_displays() ?"
 msgstr ""
 
 #: shared-module/displayio/__init__.c

locale/de_DE.po

@@ -2114,8 +2114,8 @@ msgid "Too many channels in sample."
 msgstr "Zu viele Kanäle im sample."
 
 #: shared-module/displayio/__init__.c
-msgid "Too many display busses"
-msgstr "Zu viele Anzeigebusse"
+msgid "Too many display busses; forgot displayio.release_displays() ?"
+msgstr ""
 
 #: shared-module/displayio/__init__.c
 msgid "Too many displays"
@@ -4463,6 +4463,9 @@ msgstr "zi muss eine Gleitkommazahl sein"
 msgid "zi must be of shape (n_section, 2)"
 msgstr "zi muss die Form (n_section, 2) haben"
 
+#~ msgid "Too many display busses"
+#~ msgstr "Zu viele Anzeigebusse"
+
 #~ msgid "Cannot transfer without MOSI and MISO pins"
 #~ msgstr "Kann nicht ohne MISO und MOSI Pins transferieren"
 

locale/el.po

@@ -2085,7 +2085,7 @@ msgid "Too many channels in sample."
 msgstr ""
 
 #: shared-module/displayio/__init__.c
-msgid "Too many display busses"
+msgid "Too many display busses; forgot displayio.release_displays() ?"
 msgstr ""
 
 #: shared-module/displayio/__init__.c

locale/en_GB.po

@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"PO-Revision-Date: 2023-07-28 00:10+0000\n"
+"PO-Revision-Date: 2023-07-30 11:47+0000\n"
 "Last-Translator: Andi Chandler <[email protected]>\n"
 "Language-Team: none\n"
 "Language: en_GB\n"
@@ -1779,7 +1779,7 @@ msgstr "Pins must share PWM slice"
 
 #: shared-module/usb/core/Device.c
 msgid "Pipe error"
-msgstr ""
+msgstr "Pipe error"
 
 #: py/builtinhelp.c
 msgid "Plus any modules on the filesystem\n"
@@ -2087,8 +2087,8 @@ msgid "Too many channels in sample."
 msgstr "Too many channels in sample."
 
 #: shared-module/displayio/__init__.c
-msgid "Too many display busses"
-msgstr "Too many display busses"
+msgid "Too many display busses; forgot displayio.release_displays() ?"
+msgstr "Too many display busses; forgot displayio.release_displays() ?"
 
 #: shared-module/displayio/__init__.c
 msgid "Too many displays"
@@ -4404,6 +4404,9 @@ msgstr "zi must be of float type"
 msgid "zi must be of shape (n_section, 2)"
 msgstr "zi must be of shape (n_section, 2)"
 
+#~ msgid "Too many display busses"
+#~ msgstr "Too many display busses"
+
 #~ msgid "Cannot transfer without MOSI and MISO pins"
 #~ msgstr "Cannot transfer without MOSI and MISO pins"
 

locale/es.po

@@ -8,8 +8,8 @@ msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
 "POT-Creation-Date: 2021-01-04 12:55-0600\n"
-"PO-Revision-Date: 2023-07-16 04:32+0000\n"
-"Last-Translator: Jose David M <[email protected]>\n"
+"PO-Revision-Date: 2023-07-30 11:47+0000\n"
+"Last-Translator: Pablo Martinez Bernal <[email protected]>\n"
 "Language-Team: \n"
 "Language: es\n"
 "MIME-Version: 1.0\n"
@@ -1810,7 +1810,7 @@ msgstr "Los pines deben compartir la división PWM"
 
 #: shared-module/usb/core/Device.c
 msgid "Pipe error"
-msgstr ""
+msgstr "Error de conexión"
 
 #: py/builtinhelp.c
 msgid "Plus any modules on the filesystem\n"
@@ -2126,8 +2126,9 @@ msgid "Too many channels in sample."
 msgstr "Demasiados canales en sample."
 
 #: shared-module/displayio/__init__.c
-msgid "Too many display busses"
-msgstr "Demasiados buses de pantalla"
+msgid "Too many display busses; forgot displayio.release_displays() ?"
+msgstr ""
+"Demasiados buses para displays. Olvidaste displayio.release_displays() ?"
 
 #: shared-module/displayio/__init__.c
 msgid "Too many displays"
@@ -2858,7 +2859,7 @@ msgstr "no se puede crear instancia"
 
 #: extmod/ulab/code/ndarray.c
 msgid "cannot delete array elements"
-msgstr ""
+msgstr "no se pudo eliminar elementos del array"
 
 #: py/runtime.c
 msgid "cannot import name %q"
@@ -3323,11 +3324,11 @@ msgstr "ensamblador en línea debe ser una función"
 
 #: extmod/ulab/code/numpy/vector.c
 msgid "input and output dimensions differ"
-msgstr ""
+msgstr "dimensiones de entrada y salida distintas"
 
 #: extmod/ulab/code/numpy/vector.c
 msgid "input and output shapes differ"
-msgstr ""
+msgstr "formas de entrada y salida distintas"
 
 #: extmod/ulab/code/numpy/create.c
 msgid "input argument must be an integer, a tuple, or a list"
@@ -3663,7 +3664,7 @@ msgstr "yield nativo"
 
 #: extmod/ulab/code/ndarray.c
 msgid "ndarray length overflows"
-msgstr ""
+msgstr "la longitud de ndarray desborda"
 
 #: py/runtime.c
 #, c-format
@@ -3768,7 +3769,7 @@ msgstr "no esta implementado para complex dtype"
 
 #: extmod/ulab/code/numpy/bitwise.c
 msgid "not supported for input types"
-msgstr ""
+msgstr "no soportado para los tipos de entrada"
 
 #: extmod/ulab/code/numpy/create.c
 msgid "number of points must be at least 2"
@@ -3920,23 +3921,23 @@ msgstr "La matriz de salida es demasiado pequeña"
 
 #: extmod/ulab/code/numpy/vector.c
 msgid "out keyword is not supported for complex dtype"
-msgstr ""
+msgstr "out no soportado para el dtype 'complex'"
 
 #: extmod/ulab/code/numpy/vector.c
 msgid "out keyword is not supported for function"
-msgstr ""
+msgstr "out no soportado para funciones"
 
 #: extmod/ulab/code/utils/utils.c
 msgid "out must be a float dense array"
 msgstr "la matriz de salida debe ser densa de números float"
 
 #: extmod/ulab/code/numpy/vector.c
 msgid "out must be an ndarray"
-msgstr ""
+msgstr "out debe ser un ndarray"
 
 #: extmod/ulab/code/numpy/vector.c
 msgid "out must be of float dtype"
-msgstr ""
+msgstr "el dtype de out debe ser float"
 
 #: shared-bindings/bitmaptools/__init__.c
 msgid "out of range of target"
@@ -4459,6 +4460,9 @@ msgstr "zi debe ser de tipo flotante"
 msgid "zi must be of shape (n_section, 2)"
 msgstr "zi debe ser una forma (n_section,2)"
 
+#~ msgid "Too many display busses"
+#~ msgstr "Demasiados buses de pantalla"
+
 #~ msgid "Cannot transfer without MOSI and MISO pins"
 #~ msgstr "No puede ser transferido si los pines MOSI y MISO"
 

locale/fil.po

@@ -2072,7 +2072,7 @@ msgid "Too many channels in sample."
 msgstr "Sobra ang channels sa sample."
 
 #: shared-module/displayio/__init__.c
-msgid "Too many display busses"
+msgid "Too many display busses; forgot displayio.release_displays() ?"
 msgstr ""
 
 #: shared-module/displayio/__init__.c

locale/fr.po

@@ -2133,8 +2133,8 @@ msgid "Too many channels in sample."
 msgstr "Trop de canaux dans l'échantillon."
 
 #: shared-module/displayio/__init__.c
-msgid "Too many display busses"
-msgstr "Trop de bus d'affichage"
+msgid "Too many display busses; forgot displayio.release_displays() ?"
+msgstr ""
 
 #: shared-module/displayio/__init__.c
 msgid "Too many displays"
@@ -4482,6 +4482,9 @@ msgstr "zi doit être de type float"
 msgid "zi must be of shape (n_section, 2)"
 msgstr "zi doit être de forme (n_section, 2)"
 
+#~ msgid "Too many display busses"
+#~ msgstr "Trop de bus d'affichage"
+
 #~ msgid "Cannot transfer without MOSI and MISO pins"
 #~ msgstr "Impossible de transférer sans une broche MOSI ou MISO"
 

locale/hi.po

@@ -2056,7 +2056,7 @@ msgid "Too many channels in sample."
 msgstr ""
 
 #: shared-module/displayio/__init__.c
-msgid "Too many display busses"
+msgid "Too many display busses; forgot displayio.release_displays() ?"
 msgstr ""
 
 #: shared-module/displayio/__init__.c

locale/it_IT.po

@@ -2079,7 +2079,7 @@ msgid "Too many channels in sample."
 msgstr ""
 
 #: shared-module/displayio/__init__.c
-msgid "Too many display busses"
+msgid "Too many display busses; forgot displayio.release_displays() ?"
 msgstr ""
 
 #: shared-module/displayio/__init__.c

locale/ja.po

@@ -2072,7 +2072,7 @@ msgid "Too many channels in sample."
 msgstr "サンプルのチャンネル数が多すぎます"
 
 #: shared-module/displayio/__init__.c
-msgid "Too many display busses"
+msgid "Too many display busses; forgot displayio.release_displays() ?"
 msgstr ""
 
 #: shared-module/displayio/__init__.c

locale/ko.po

@@ -2059,7 +2059,7 @@ msgid "Too many channels in sample."
 msgstr ""
 
 #: shared-module/displayio/__init__.c
-msgid "Too many display busses"
+msgid "Too many display busses; forgot displayio.release_displays() ?"
 msgstr ""
 
 #: shared-module/displayio/__init__.c

locale/nl.po

@@ -2077,8 +2077,8 @@ msgid "Too many channels in sample."
 msgstr "Teveel kanalen in sample."
 
 #: shared-module/displayio/__init__.c
-msgid "Too many display busses"
-msgstr "Teveel beeldscherm bussen"
+msgid "Too many display busses; forgot displayio.release_displays() ?"
+msgstr ""
 
 #: shared-module/displayio/__init__.c
 msgid "Too many displays"
@@ -4395,6 +4395,9 @@ msgstr "zi moet van type float zijn"
 msgid "zi must be of shape (n_section, 2)"
 msgstr "zi moet vorm (n_section, 2) hebben"
 
+#~ msgid "Too many display busses"
+#~ msgstr "Teveel beeldscherm bussen"
+
 #~ msgid "Hardware busy, try alternative pins"
 #~ msgstr "Hardware bezig, probeer alternatieve pinnen"
 

locale/pl.po

@@ -2064,8 +2064,8 @@ msgid "Too many channels in sample."
 msgstr "Zbyt wiele kanałów."
 
 #: shared-module/displayio/__init__.c
-msgid "Too many display busses"
-msgstr "Zbyt wiele magistrali"
+msgid "Too many display busses; forgot displayio.release_displays() ?"
+msgstr ""
 
 #: shared-module/displayio/__init__.c
 msgid "Too many displays"
@@ -4371,6 +4371,9 @@ msgstr ""
 msgid "zi must be of shape (n_section, 2)"
 msgstr ""
 
+#~ msgid "Too many display busses"
+#~ msgstr "Zbyt wiele magistrali"
+
 #~ msgid "Hardware busy, try alternative pins"
 #~ msgstr "Sprzęt zajęty, wypróbuj alternatywne piny"
 

locale/pt_BR.po

@@ -6,7 +6,7 @@ msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
 "POT-Creation-Date: 2021-01-04 12:55-0600\n"
-"PO-Revision-Date: 2023-07-27 17:07+0000\n"
+"PO-Revision-Date: 2023-07-30 11:47+0000\n"
 "Last-Translator: Wellington Terumi Uemura <[email protected]>\n"
 "Language-Team: \n"
 "Language: pt_BR\n"
@@ -1804,7 +1804,7 @@ msgstr "Os pinos devem compartilhar a fatia do PWM"
 
 #: shared-module/usb/core/Device.c
 msgid "Pipe error"
-msgstr ""
+msgstr "Erro de pipe"
 
 #: py/builtinhelp.c
 msgid "Plus any modules on the filesystem\n"
@@ -2121,8 +2121,10 @@ msgid "Too many channels in sample."
 msgstr "Muitos canais na amostra."
 
 #: shared-module/displayio/__init__.c
-msgid "Too many display busses"
-msgstr "Muitos barramentos estão sendo exibidos"
+msgid "Too many display busses; forgot displayio.release_displays() ?"
+msgstr ""
+"Excesso de barramentos de exibição; esqueceu do displayio.release_displays() "
+"?"
 
 #: shared-module/displayio/__init__.c
 msgid "Too many displays"
@@ -4460,6 +4462,9 @@ msgstr "zi deve ser de um tipo float"
 msgid "zi must be of shape (n_section, 2)"
 msgstr "zi deve estar na forma (n_section, 2)"
 
+#~ msgid "Too many display busses"
+#~ msgstr "Muitos barramentos estão sendo exibidos"
+
 #~ msgid "Cannot transfer without MOSI and MISO pins"
 #~ msgstr "Não é possível transferir sem os pinos MOSI e MISO"
 

locale/ru.po

@@ -2119,7 +2119,7 @@ msgid "Too many channels in sample."
 msgstr ""
 
 #: shared-module/displayio/__init__.c
-msgid "Too many display busses"
+msgid "Too many display busses; forgot displayio.release_displays() ?"
 msgstr ""
 
 #: shared-module/displayio/__init__.c