phy: allow drivers to flag a PHY device as internal

libphy currently always reports a PHY as an external transceiver from
the ethtool output. This is inaccurate, because some drivers should be
able to tell that a PHY device is an internal transceiver of an Ethernet
MAC. Add a new flag (PHY_IS_INTERNAL) which can be set by PHY drivers
just like other flags, and a corresponding helper: phy_is_internal()
which can be used by networking drivers to query if a given
PHY device is internal.

Signed-off-by: Florian Fainelli <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

Author: ffainelli

drivers/net/phy/phy.c

@@ -294,7 +294,8 @@ int phy_ethtool_gset(struct phy_device *phydev, struct ethtool_cmd *cmd)
 	cmd->duplex = phydev->duplex;
 	cmd->port = PORT_MII;
 	cmd->phy_address = phydev->addr;
-	cmd->transceiver = XCVR_EXTERNAL;
+	cmd->transceiver = phy_is_internal(phydev) ?
+		XCVR_INTERNAL : XCVR_EXTERNAL;
 	cmd->autoneg = phydev->autoneg;
 
 	return 0;

drivers/net/phy/phy_device.c

@@ -1017,6 +1017,9 @@ static int phy_probe(struct device *dev)
 			phy_interrupt_is_valid(phydev))
 		phydev->irq = PHY_POLL;
 
+	if (phydrv->flags & PHY_IS_INTERNAL)
+		phydev->is_internal = true;
+
 	mutex_lock(&phydev->lock);
 
 	/* Start out supporting everything. Eventually,

include/linux/phy.h

@@ -49,6 +49,7 @@
 
 #define PHY_HAS_INTERRUPT	0x00000001
 #define PHY_HAS_MAGICANEG	0x00000002
+#define PHY_IS_INTERNAL		0x00000004
 
 /* Interface Mode definitions */
 typedef enum {
@@ -261,6 +262,7 @@ struct phy_c45_device_ids {
  * phy_id: UID for this device found during discovery
  * c45_ids: 802.3-c45 Device Identifers if is_c45.
  * is_c45:  Set to true if this phy uses clause 45 addressing.
+ * is_internal: Set to true if this phy is internal to a MAC.
  * state: state of the PHY for management purposes
  * dev_flags: Device-specific flags used by the PHY driver.
  * addr: Bus address of PHY
@@ -298,6 +300,7 @@ struct phy_device {
 
 	struct phy_c45_device_ids c45_ids;
 	bool is_c45;
+	bool is_internal;
 
 	enum phy_state state;
 
@@ -520,6 +523,15 @@ static inline bool phy_interrupt_is_valid(struct phy_device *phydev)
 	return phydev->irq != PHY_POLL && phydev->irq != PHY_IGNORE_INTERRUPT;
 }
 
+/**
+ * phy_is_internal - Convenience function for testing if a PHY is internal
+ * @phydev: the phy_device struct
+ */
+static inline bool phy_is_internal(struct phy_device *phydev)
+{
+	return phydev->is_internal;
+}
+
 struct phy_device *phy_device_create(struct mii_bus *bus, int addr, int phy_id,
 		bool is_c45, struct phy_c45_device_ids *c45_ids);
 struct phy_device *get_phy_device(struct mii_bus *bus, int addr, bool is_c45);