[lldb-dap][docs] Improve documentation for contributors

lldb/docs/resources/lldbdap.md

@@ -1,16 +1,95 @@
-# LLDB-DAP
-
-The `lldb-dap` tool (formerly `lldb-vscode`) is a command line tool that
-implements the [Debug Adapter
-Protocol](https://microsoft.github.io/debug-adapter-protocol/). It can be
-installed as an extension for Visual Studio Code and other IDEs supporting DAP.
-The protocol is easy to run remotely and also can allow other tools and IDEs to
-get a full featured debugger with a well defined protocol.
-
-## Local Installation for Visual Studio Code
+# Contributing to LLDB-DAP
+
+This guide describes how to extend and contribute to lldb-dap.
+For documentation on how to use lldb-dap, see [lldb-dap's README](https://github.com/llvm/llvm-project/blob/main/lldb/tools/lldb-dap/README.md).
+
+lldb-dap and LLDB are developed under the umbrella of the
+[LLVM project](https://llvm.org/). As such, the
+"[Getting Started with the LLVM System](https://llvm.org/docs/GettingStarted.html)",
+"[Contributing to LLVM](https://llvm.org/docs/Contributing.html)" and
+"[LLVM coding standard](https://llvm.org/docs/CodingStandards.html)"
+guides might also be relevant, if you are a first-time contributor to the LLVM
+project.
+
+lldb-dap's source code is [part of the LLVM
+repository](https://github.com/llvm/llvm-project/tree/main/lldb/tools/lldb-dap)
+on Github. We use Github's [issue
+tracker](https://github.com/llvm/llvm-project/tree/main/lldb/tools/lldb-dap)
+and patches can be submitted via [pull
+requests](https://github.com/llvm/llvm-project/pulls).
+
+## Building `lldb-dap` from soruce
+
+To build lldb-dap from source, first need to [setup a LLDB build](https://lldb.llvm.org/resources/build.html).
+After doing so, run `ninja lldb-dap`. To use your freshly built `lldb-dap`
+binary, install the VS Code extension and point it to lldb-dap by setting the
+`lldb-dap.executable-path` setting.
+
+## Responsibilities of LLDB, lldb-dap and the Visual Studio Code Extension
+
+Under the hood, the UI-based debugging experience is fueled by three separate
+components:
+
+* LLDB provides general, IDE-indepedent debugging features, such as:
+  loading binaries / core dumps, interpreting debug info, setting breakpoints,
+  pretty-printing variables, etc. The `lldb` binary exposes this functionality
+  via a command line interface.
+* `lldb-dap` exposes LLDB's functionality via the
+  "[Debug Adapter Protocol](https://microsoft.github.io/debug-adapter-protocol/)",
+  i.e. a protocol through which various IDEs (VS Code, Emacs, vim, neovim, ...)
+  can interact with a wide range of debuggers (`lldb-dap` and many others).
+* The VS Code extension exposes the lldb-dap binary within VS Code. It acts
+  as a thin wrapper around the lldb-dap binary, and adds VS-Code-specific UI
+  integration on top of lldb-dap, such as autocompletion for `launch.json`
+  configuration files.
+
+Since lldb-dap builds on top of LLDB, all of LLDB's extensibility mechanisms
+such as [Variable Pretty-Printing](https://lldb.llvm.org/use/variable.html),
+[Frame recognizers](https://lldb.llvm.org/use/python-reference.html#writing-lldb-frame-recognizers-in-python)
+and [Python Scripting](https://lldb.llvm.org/use/python.html) are available
+also in lldb-dap.
+
+When adding new functionality, you generally want to add it on the lowest
+applicable level. I.e., quite frequently you actually want to add functionality
+to LLDB's core in order to improve your debugging experience in VS Code.
+
+### The Debug Adapter Protocol
+
+The most relevant resources for the Debug Adapter Protocol are:
+* [The overview](https://microsoft.github.io/debug-adapter-protocol/overview)
+  which provides a high-level introduction,
+* the [human-readable specification](https://microsoft.github.io/debug-adapter-protocol/specification), and
+* the [JSON-schema specification](https://github.com/microsoft/debug-adapter-protocol/blob/main/debugAdapterProtocol.json).
+
+lldb-dap adds some additional non-standard extensions to the protocol. To take
+advantage of those extensions, IDE-specific support code is needed, usually
+inside the VS Code extension. When adding a new extension, please first look
+through the [issue tracker of the Debug Adapter
+Protocol](https://github.com/microsoft/debug-adapter-protocol/issues) to check
+if there already is a proposal serving your use case. If so, try to take
+inspiration from it. If not, consider opening an upstream issue.
+
+To avoid naming collisions with potential future extensions of the Debug
+Adapter protocol, all non-standard extensions should use the prefix
+`$__lldb_extension` in their JSON property names.
+
+### Debugging the Debug Adapter Protocol
+
+To debug the Debug Adapter Protocol, point the `LLDBDAP_LOG` environment
+variable to a file on your disk. lldb-dap will log all communication received
+from / sent to the IDE to the provided path. In the VS Code extension, you
+can also set the log path through the `lldb-dap.log-path` VS Code setting.
+
+## Building the VS Code extension from source
 
 Installing the plug-in is very straightforward and involves just a few steps.
 
+In most cases, installing the VS Code extension from the [VS Code
+Marketplace](https://marketplace.visualstudio.com/items?itemName=llvm-vs-code-extensions.lldb-dap)
+and pointing it to a locally built lldb-dap binary is sufficient. Building
+the VS Code extension from source is only necessary if the TypeScript code is
+changed.
+
 ### Pre-requisites
 
 - Install a modern version of node (e.g. `v20.0.0`).
@@ -33,10 +112,6 @@ And then you are ready!
 
 ### Updating the extension
 
-*Note: It's not necessary to update the extension if there has been changes
-to  `lldb-dap`. The extension needs to be updated only if the TypesScript code
-has changed.*
-
 Updating the extension is pretty much the same process as installing it from
 scratch. However, VS Code expects the version number of the upgraded extension
 to be greater than the previous one, otherwise the installation step might have

lldb/tools/lldb-dap/README.md

@@ -286,3 +286,12 @@ is evaluated as a command.
 The initial repl-mode can be configured with the cli flag `--repl-mode=<mode>`
 and may also be adjusted at runtime using the lldb command
 `lldb-dap repl-mode <mode>`.
+
+## Contributing
+
+`lldb-dap` and `lldb` are developed under the umbrella of the [LLVM project](https://llvm.org/).
+The source code is [part of the LLVM repository](https://github.com/llvm/llvm-project/tree/main/lldb/tools/lldb-dap) on Github.
+We use Github's [issue tracker](https://github.com/llvm/llvm-project/tree/main/lldb/tools/lldb-dap) and patches can be submitted via [pull requests](https://github.com/llvm/llvm-project/pulls).
+Furthermore, there is a [LLDB category](https://discourse.llvm.org/c/subprojects/lldb/8) on the LLVM discourse forum.
+
+For instructions on how to get started with development on lldb-dap, see the "[Contributing to lldb-dap](https://lldb.llvm.org/resources/lldbdap.html)"

lldb/tools/lldb-dap/package.json

@@ -8,7 +8,8 @@
   "license": "Apache 2.0 License with LLVM exceptions",
   "repository": {
     "type": "git",
-    "url": "https://github.com/llvm/vscode-lldb.git"
+    "url": "https://github.com/llvm/llvm-project.git",
+    "directory": "lldb/tools/lldb-dap/"
   },
   "bugs": {
     "url": "https://github.com/llvm/llvm-project/issues"