[libc][math] Implement double precision acos correctly rounded for all rounding modes.

libc/config/darwin/arm/entrypoints.txt

@@ -135,6 +135,7 @@ set(TARGET_LIBM_ENTRYPOINTS
     libc.src.fenv.feupdateenv
 
     # math.h entrypoints
+    libc.src.math.acos
     libc.src.math.acosf
     libc.src.math.acoshf
     libc.src.math.asin

libc/config/linux/aarch64/entrypoints.txt

@@ -410,6 +410,7 @@ set(TARGET_LIBM_ENTRYPOINTS
     libc.src.fenv.feupdateenv
 
     # math.h entrypoints
+    libc.src.math.acos
     libc.src.math.acosf
     libc.src.math.acoshf
     libc.src.math.asin

libc/config/linux/arm/entrypoints.txt

@@ -242,6 +242,7 @@ set(TARGET_LIBM_ENTRYPOINTS
     libc.src.fenv.feupdateenv
 
     # math.h entrypoints
+    libc.src.math.acos
     libc.src.math.acosf
     libc.src.math.acoshf
     libc.src.math.asin

libc/config/linux/riscv/entrypoints.txt

@@ -396,6 +396,7 @@ set(TARGET_LIBM_ENTRYPOINTS
     libc.src.fenv.feupdateenv
 
     # math.h entrypoints
+    libc.src.math.acos
     libc.src.math.acosf
     libc.src.math.acoshf
     libc.src.math.asin

libc/config/linux/x86_64/entrypoints.txt

@@ -415,6 +415,7 @@ set(TARGET_LIBM_ENTRYPOINTS
     libc.src.fenv.feupdateenv
 
     # math.h entrypoints
+    libc.src.math.acos
     libc.src.math.acosf
     libc.src.math.acoshf
     libc.src.math.asin

libc/config/windows/entrypoints.txt

@@ -127,6 +127,7 @@ set(TARGET_LIBM_ENTRYPOINTS
     libc.src.fenv.feupdateenv
 
     # math.h entrypoints
+    libc.src.math.acos
     libc.src.math.acosf
     libc.src.math.acoshf
     libc.src.math.asin

libc/docs/headers/math/index.rst

@@ -249,7 +249,7 @@ Higher Math Functions
 +-----------+------------------+-----------------+------------------------+----------------------+------------------------+------------------------+----------------------------+
 | <Func>    | <Func_f> (float) | <Func> (double) | <Func_l> (long double) | <Func_f16> (float16) | <Func_f128> (float128) | C23 Definition Section | C23 Error Handling Section |
 +===========+==================+=================+========================+======================+========================+========================+============================+
-| acos      | |check|          |                 |                        | |check|              |                        | 7.12.4.1               | F.10.1.1                   |
+| acos      | |check|          | |check|         |                        | |check|              |                        | 7.12.4.1               | F.10.1.1                   |
 +-----------+------------------+-----------------+------------------------+----------------------+------------------------+------------------------+----------------------------+
 | acosh     | |check|          |                 |                        | |check|              |                        | 7.12.5.1               | F.10.2.1                   |
 +-----------+------------------+-----------------+------------------------+----------------------+------------------------+------------------------+----------------------------+

libc/include/math.yaml

@@ -8,6 +8,12 @@ types:
 enums: []
 objects: []
 functions:
+  - name: acos
+    standards:
+      - stdc
+    return_type: double
+    arguments:
+      - type: double
   - name: acosf
     standards:
       - stdc

libc/src/math/generic/CMakeLists.txt

@@ -4117,6 +4117,7 @@ add_entrypoint_object(
   HDRS
     ../asin.h
   DEPENDS
+    .asin_utils
     libc.src.__support.FPUtil.double_double
     libc.src.__support.FPUtil.dyadic_float
     libc.src.__support.FPUtil.fenv_impl
@@ -4164,6 +4165,26 @@ add_entrypoint_object(
     libc.src.__support.macros.properties.types  
 )
 
+add_entrypoint_object(
+  acos
+  SRCS
+    acos.cpp
+  HDRS
+    ../acos.h
+  DEPENDS
+    .asin_utils
+    libc.src.__support.FPUtil.double_double
+    libc.src.__support.FPUtil.dyadic_float
+    libc.src.__support.FPUtil.fenv_impl
+    libc.src.__support.FPUtil.fp_bits
+    libc.src.__support.FPUtil.multiply_add
+    libc.src.__support.FPUtil.polyeval
+    libc.src.__support.FPUtil.sqrt
+    libc.src.__support.macros.optimization
+    libc.src.__support.macros.properties.types  
+    libc.src.__support.macros.properties.cpu_features
+)
+
 add_entrypoint_object(
   acospif16
   SRCS

libc/src/math/generic/acos.cpp

@@ -0,0 +1,278 @@
+//===-- Double-precision acos function ------------------------------------===//
+//
+// Part of the LLVM Project, under the Apache License v2.0 with LLVM Exceptions.
+// See https://llvm.org/LICENSE.txt for license information.
+// SPDX-License-Identifier: Apache-2.0 WITH LLVM-exception
+//
+//===----------------------------------------------------------------------===//
+
+#include "src/math/acos.h"
+#include "asin_utils.h"
+#include "src/__support/FPUtil/FEnvImpl.h"
+#include "src/__support/FPUtil/FPBits.h"
+#include "src/__support/FPUtil/PolyEval.h"
+#include "src/__support/FPUtil/double_double.h"
+#include "src/__support/FPUtil/dyadic_float.h"
+#include "src/__support/FPUtil/multiply_add.h"
+#include "src/__support/FPUtil/sqrt.h"
+#include "src/__support/macros/config.h"
+#include "src/__support/macros/optimization.h"            // LIBC_UNLIKELY
+#include "src/__support/macros/properties/cpu_features.h" // LIBC_TARGET_CPU_HAS_FMA
+
+namespace LIBC_NAMESPACE_DECL {
+
+using DoubleDouble = fputil::DoubleDouble;
+using Float128 = fputil::DyadicFloat<128>;
+
+LLVM_LIBC_FUNCTION(double, acos, (double x)) {
+  using FPBits = fputil::FPBits<double>;
+
+  FPBits xbits(x);
+  int x_exp = xbits.get_biased_exponent();
+
+  // |x| < 0.5.
+  if (x_exp < FPBits::EXP_BIAS - 1) {
+    // |x| < 2^-55.
+    if (LIBC_UNLIKELY(x_exp < FPBits::EXP_BIAS - 55)) {
+      // When |x| < 2^-55, acos(x) = pi/2
+#if defined(LIBC_MATH_HAS_SKIP_ACCURATE_PASS)
+      return PI_OVER_TWO.hi;
+#else
+      // Force the evaluation and prevent constant propagation so that it
+      // is rounded correctly for FE_UPWARD rounding mode.
+      return (xbits.abs().get_val() + 0x1.0p-160) + PI_OVER_TWO.hi;
+#endif // LIBC_MATH_HAS_SKIP_ACCURATE_PASS
+    }
+
+#ifdef LIBC_MATH_HAS_SKIP_ACCURATE_PASS
+    // acos(x) = pi/2 - asin(x)
+    //         = pi/2 - x * P(x^2)
+    double p = asin_eval(x * x);
+    return PI_OVER_TWO.hi + fputil::multiply_add(-x, p, PI_OVER_TWO.lo);
+#else
+    unsigned idx;
+    DoubleDouble x_sq = fputil::exact_mult(x, x);
+    double err = xbits.abs().get_val() * 0x1.0p-51;
+    // Polynomial approximation:
+    //   p ~ asin(x)/x
+    DoubleDouble p = asin_eval(x_sq, idx, err);
+    // asin(x) ~ x * p
+    DoubleDouble r0 = fputil::exact_mult(x, p.hi);
+    // acos(x) = pi/2 - asin(x)
+    //         ~ pi/2 - x * p
+    //         = pi/2 - x * (p.hi + p.lo)
+    double r_hi = fputil::multiply_add(-x, p.hi, PI_OVER_TWO.hi);
+    // Use Dekker's 2SUM algorithm to compute the lower part.
+    double r_lo = ((PI_OVER_TWO.hi - r_hi) - r0.hi) - r0.lo;
+    r_lo = fputil::multiply_add(-x, p.lo, r_lo + PI_OVER_TWO.lo);
+
+    // Ziv's accuracy test.
+
+    double r_upper = r_hi + (r_lo + err);
+    double r_lower = r_hi + (r_lo - err);
+
+    if (LIBC_LIKELY(r_upper == r_lower))
+      return r_upper;
+
+    // Ziv's accuracy test failed, perform 128-bit calculation.
+
+    // Recalculate mod 1/64.
+    idx = static_cast<unsigned>(fputil::nearest_integer(x_sq.hi * 0x1.0p6));
+
+    // Get x^2 - idx/64 exactly.  When FMA is available, double-double
+    // multiplication will be correct for all rounding modes.  Otherwise we use
+    // Float128 directly.
+    Float128 x_f128(x);
+
+#ifdef LIBC_TARGET_CPU_HAS_FMA_DOUBLE
+    // u = x^2 - idx/64
+    Float128 u_hi(
+        fputil::multiply_add(static_cast<double>(idx), -0x1.0p-6, x_sq.hi));
+    Float128 u = fputil::quick_add(u_hi, Float128(x_sq.lo));
+#else
+    Float128 x_sq_f128 = fputil::quick_mul(x_f128, x_f128);
+    Float128 u = fputil::quick_add(
+        x_sq_f128, Float128(static_cast<double>(idx) * (-0x1.0p-6)));
+#endif // LIBC_TARGET_CPU_HAS_FMA_DOUBLE
+
+    Float128 p_f128 = asin_eval(u, idx);
+    // Flip the sign of x_f128 to perform subtraction.
+    x_f128.sign = x_f128.sign.negate();
+    Float128 r =
+        fputil::quick_add(PI_OVER_TWO_F128, fputil::quick_mul(x_f128, p_f128));
+
+    return static_cast<double>(r);
+#endif // LIBC_MATH_HAS_SKIP_ACCURATE_PASS
+  }
+  // |x| >= 0.5
+
+  double x_abs = xbits.abs().get_val();
+
+  // Maintaining the sign:
+  constexpr double SIGN[2] = {1.0, -1.0};
+  double x_sign = SIGN[xbits.is_neg()];
+  // |x| >= 1
+  if (LIBC_UNLIKELY(x_exp >= FPBits::EXP_BIAS)) {
+    // x = +-1, asin(x) = +- pi/2
+    if (x_abs == 1.0) {
+      // x = 1, acos(x) = 0,
+      // x = -1, acos(x) = pi
+      return x == 1.0 ? 0.0 : fputil::multiply_add(-x_sign, PI.hi, PI.lo);
+    }
+    // |x| > 1, return NaN.
+    if (xbits.is_quiet_nan())
+      return x;
+
+    // Set domain error for non-NaN input.
+    if (!xbits.is_nan())
+      fputil::set_errno_if_required(EDOM);
+
+    fputil::raise_except_if_required(FE_INVALID);
+    return FPBits::quiet_nan().get_val();
+  }
+
+  // When |x| >= 0.5, we perform range reduction as follow:
+  //
+  // When 0.5 <= x < 1, let:
+  //   y = acos(x)
+  // We will use the double angle formula:
+  //   cos(2y) = 1 - 2 sin^2(y)
+  // and the complement angle identity:
+  //   x = cos(y) = 1 - 2 sin^2 (y/2)
+  // So:
+  //   sin(y/2) = sqrt( (1 - x)/2 )
+  // And hence:
+  //   y/2 = asin( sqrt( (1 - x)/2 ) )
+  // Equivalently:
+  //   acos(x) = y = 2 * asin( sqrt( (1 - x)/2 ) )
+  // Let u = (1 - x)/2, then:
+  //   acos(x) = 2 * asin( sqrt(u) )
+  // Moreover, since 0.5 <= x < 1:
+  //   0 < u <= 1/4, and 0 < sqrt(u) <= 0.5,
+  // And hence we can reuse the same polynomial approximation of asin(x) when
+  // |x| <= 0.5:
+  //   acos(x) ~ 2 * sqrt(u) * P(u).
+  //
+  // When -1 < x <= -0.5, we reduce to the previous case using the formula:
+  //   acos(x) = pi - acos(-x)
+  //           = pi - 2 * asin ( sqrt( (1 + x)/2 ) )
+  //           ~ pi - 2 * sqrt(u) * P(u),
+  // where u = (1 - |x|)/2.
+
+  // u = (1 - |x|)/2
+  double u = fputil::multiply_add(x_abs, -0.5, 0.5);
+  // v_hi + v_lo ~ sqrt(u).
+  // Let:
+  //   h = u - v_hi^2 = (sqrt(u) - v_hi) * (sqrt(u) + v_hi)
+  // Then:
+  //   sqrt(u) = v_hi + h / (sqrt(u) + v_hi)
+  //            ~ v_hi + h / (2 * v_hi)
+  // So we can use:
+  //   v_lo = h / (2 * v_hi).
+  double v_hi = fputil::sqrt<double>(u);
+
+#ifdef LIBC_MATH_HAS_SKIP_ACCURATE_PASS
+  constexpr DoubleDouble CONST_TERM[2] = {{0.0, 0.0}, PI};
+  DoubleDouble const_term = CONST_TERM[xbits.is_neg()];
+
+  double p = asin_eval(u);
+  double scale = x_sign * 2.0 * v_hi;
+  double r = const_term.hi + fputil::multiply_add(scale, p, const_term.lo);
+  return r;
+#else
+
+#ifdef LIBC_TARGET_CPU_HAS_FMA_DOUBLE
+  double h = fputil::multiply_add(v_hi, -v_hi, u);
+#else
+  DoubleDouble v_hi_sq = fputil::exact_mult(v_hi, v_hi);
+  double h = (u - v_hi_sq.hi) - v_hi_sq.lo;
+#endif // LIBC_TARGET_CPU_HAS_FMA_DOUBLE
+
+  // Scale v_lo and v_hi by 2 from the formula:
+  //   vh = v_hi * 2
+  //   vl = 2*v_lo = h / v_hi.
+  double vh = v_hi * 2.0;
+  double vl = h / v_hi;
+
+  // Polynomial approximation:
+  //   p ~ asin(sqrt(u))/sqrt(u)
+  unsigned idx;
+  double err = vh * 0x1.0p-51;
+
+  DoubleDouble p = asin_eval(DoubleDouble{0.0, u}, idx, err);
+
+  // Perform computations in double-double arithmetic:
+  //   asin(x) = pi/2 - (v_hi + v_lo) * (ASIN_COEFFS[idx][0] + p)
+  DoubleDouble r0 = fputil::quick_mult(DoubleDouble{vl, vh}, p);
+
+  double r_hi, r_lo;
+  if (xbits.is_pos()) {
+    r_hi = r0.hi;
+    r_lo = r0.lo;
+  } else {
+    DoubleDouble r = fputil::exact_add(PI.hi, -r0.hi);
+    r_hi = r.hi;
+    r_lo = (PI.lo - r0.lo) + r.lo;
+  }
+
+  // Ziv's accuracy test.
+
+  double r_upper = r_hi + (r_lo + err);
+  double r_lower = r_hi + (r_lo - err);
+
+  if (LIBC_LIKELY(r_upper == r_lower))
+    return r_upper;
+
+  // Ziv's accuracy test failed, we redo the computations in Float128.
+  // Recalculate mod 1/64.
+  idx = static_cast<unsigned>(fputil::nearest_integer(u * 0x1.0p6));
+
+  // After the first step of Newton-Raphson approximating v = sqrt(u), we have
+  // that:
+  //   sqrt(u) = v_hi + h / (sqrt(u) + v_hi)
+  //      v_lo = h / (2 * v_hi)
+  // With error:
+  //   sqrt(u) - (v_hi + v_lo) = h * ( 1/(sqrt(u) + v_hi) - 1/(2*v_hi) )
+  //                           = -h^2 / (2*v * (sqrt(u) + v)^2).
+  // Since:
+  //   (sqrt(u) + v_hi)^2 ~ (2sqrt(u))^2 = 4u,
+  // we can add another correction term to (v_hi + v_lo) that is:
+  //   v_ll = -h^2 / (2*v_hi * 4u)
+  //        = -v_lo * (h / 4u)
+  //        = -vl * (h / 8u),
+  // making the errors:
+  //   sqrt(u) - (v_hi + v_lo + v_ll) = O(h^3)
+  // well beyond 128-bit precision needed.
+
+  // Get the rounding error of vl = 2 * v_lo ~ h / vh
+  // Get full product of vh * vl
+#ifdef LIBC_TARGET_CPU_HAS_FMA_DOUBLE
+  double vl_lo = fputil::multiply_add(-v_hi, vl, h) / v_hi;
+#else
+  DoubleDouble vh_vl = fputil::exact_mult(v_hi, vl);
+  double vl_lo = ((h - vh_vl.hi) - vh_vl.lo) / v_hi;
+#endif // LIBC_TARGET_CPU_HAS_FMA_DOUBLE
+  // vll = 2*v_ll = -vl * (h / (4u)).
+  double t = h * (-0.25) / u;
+  double vll = fputil::multiply_add(vl, t, vl_lo);
+  // m_v = -(v_hi + v_lo + v_ll).
+  Float128 m_v = fputil::quick_add(
+      Float128(vh), fputil::quick_add(Float128(vl), Float128(vll)));
+  m_v.sign = xbits.sign();
+
+  // Perform computations in Float128:
+  //   acos(x) = (v_hi + v_lo + vll) * P(u)         , when 0.5 <= x < 1,
+  //           = pi - (v_hi + v_lo + vll) * P(u)    , when -1 < x <= -0.5.
+  Float128 y_f128(fputil::multiply_add(static_cast<double>(idx), -0x1.0p-6, u));
+
+  Float128 p_f128 = asin_eval(y_f128, idx);
+  Float128 r_f128 = fputil::quick_mul(m_v, p_f128);
+
+  if (xbits.is_neg())
+    r_f128 = fputil::quick_add(PI_F128, r_f128);
+
+  return static_cast<double>(r_f128);
+#endif // LIBC_MATH_HAS_SKIP_ACCURATE_PASS
+}
+
+} // namespace LIBC_NAMESPACE_DECL