Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal

Pull thermal management updates from Eduardo Valentin:

 - rework tsens driver to add support for tsens-v2 (Amit Kucheria)

 - rework armada thermal driver to use syscon and multichannel support
   (Miquel Raynal)

 - fixes to TI SoC, IMX, Exynos, RCar, and hwmon drivers

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal: (34 commits)
  thermal: armada: fix copy-paste error in armada_thermal_probe()
  thermal: rcar_thermal: avoid NULL dereference in absence of IRQ resources
  thermal: samsung: Remove Exynos5440 clock handling left-overs
  thermal: tsens: Fix negative temperature reporting
  thermal: tsens: switch from of_iomap() to devm_ioremap_resource()
  thermal: tsens: Rename variable
  thermal: tsens: Add generic support for TSENS v2 IP
  thermal: tsens: Rename tsens-8996 to tsens-v2 for reuse
  thermal: tsens: Add support to split up register address space into two
  dt: thermal: tsens: Document the fallback DT property for v2 of TSENS IP
  thermal: tsens: Get rid of unused fields in structure
  thermal_hwmon: Pass the originating device down to hwmon_device_register_with_info
  thermal_hwmon: Sanitize attribute name passed to hwmon
  dt-bindings: thermal: armada: add reference to new bindings
  dt-bindings: cp110: add the thermal node in the syscon file
  dt-bindings: cp110: update documentation since DT de-duplication
  dt-bindings: ap806: add the thermal node in the syscon file
  dt-bindings: cp110: prepare the syscon file to list other syscons nodes
  dt-bindings: ap806: prepare the syscon file to list other syscons nodes
  dt-bindings: cp110: rename cp110 syscon file
  ...

Author: torvalds

Documentation/devicetree/bindings/arm/marvell/ap806-system-controller.txt

@@ -2,14 +2,17 @@ Marvell Armada AP806 System Controller
 ======================================
 
 The AP806 is one of the two core HW blocks of the Marvell Armada 7K/8K
-SoCs. It contains a system controller, which provides a number
-registers giving access to numerous features: clocks, pin-muxing and
-many other SoC configuration items. This DT binding allows to describe
-this system controller.
+SoCs. It contains system controllers, which provide several registers
+giving access to numerous features: clocks, pin-muxing and many other
+SoC configuration items. This DT binding allows to describe these
+system controllers.
 
 For the top level node:
  - compatible: must be: "syscon", "simple-mfd";
-  - reg: register area of the AP806 system controller
+ - reg: register area of the AP806 system controller
+
+SYSTEM CONTROLLER 0
+===================
 
 Clocks:
 -------
@@ -98,3 +101,38 @@ ap_syscon: system-controller@6f4000 {
 		gpio-ranges = <&ap_pinctrl 0 0 19>;
 	};
 };
+
+SYSTEM CONTROLLER 1
+===================
+
+Thermal:
+--------
+
+For common binding part and usage, refer to
+Documentation/devicetree/bindings/thermal/thermal.txt
+
+The thermal IP can probe the temperature all around the processor. It
+may feature several channels, each of them wired to one sensor.
+
+Required properties:
+- compatible: must be one of:
+  * marvell,armada-ap806-thermal
+- reg: register range associated with the thermal functions.
+
+Optional properties:
+- #thermal-sensor-cells: shall be <1> when thermal-zones subnodes refer
+  to this IP and represents the channel ID. There is one sensor per
+  channel. O refers to the thermal IP internal channel, while positive
+  IDs refer to each CPU.
+
+Example:
+ap_syscon1: system-controller@6f8000 {
+	compatible = "syscon", "simple-mfd";
+	reg = <0x6f8000 0x1000>;
+
+	ap_thermal: thermal-sensor@80 {
+		compatible = "marvell,armada-ap806-thermal";
+		reg = <0x80 0x10>;
+		#thermal-sensor-cells = <1>;
+	};
+};

Documentation/devicetree/bindings/arm/marvell/cp110-system-controller0.txt renamed to Documentation/devicetree/bindings/arm/marvell/cp110-system-controller.txt

@@ -1,15 +1,18 @@
-Marvell Armada CP110 System Controller 0
-========================================
+Marvell Armada CP110 System Controller
+======================================
 
 The CP110 is one of the two core HW blocks of the Marvell Armada 7K/8K
-SoCs. It contains two sets of system control registers, System
-Controller 0 and System Controller 1. This Device Tree binding allows
-to describe the first system controller, which provides registers to
-configure various aspects of the SoC.
+SoCs. It contains system controllers, which provide several registers
+giving access to numerous features: clocks, pin-muxing and many other
+SoC configuration items. This DT binding allows to describe these
+system controllers.
 
 For the top level node:
  - compatible: must be: "syscon", "simple-mfd";
- - reg: register area of the CP110 system controller 0
+ - reg: register area of the CP110 system controller
+
+SYSTEM CONTROLLER 0
+===================
 
 Clocks:
 -------
@@ -163,26 +166,60 @@ Required properties:
 
 Example:
 
-cpm_syscon0: system-controller@440000 {
+CP110_LABEL(syscon0): system-controller@440000 {
 	compatible = "syscon", "simple-mfd";
 	reg = <0x440000 0x1000>;
 
-	cpm_clk: clock {
+	CP110_LABEL(clk): clock {
 		compatible = "marvell,cp110-clock";
 		#clock-cells = <2>;
 	};
 
-	cpm_pinctrl: pinctrl {
+	CP110_LABEL(pinctrl): pinctrl {
 		compatible = "marvell,armada-8k-cpm-pinctrl";
 	};
 
-	cpm_gpio1: gpio@100 {
+	CP110_LABEL(gpio1): gpio@100 {
 		compatible = "marvell,armada-8k-gpio";
 		offset = <0x100>;
 		ngpios = <32>;
 		gpio-controller;
 		#gpio-cells = <2>;
-		gpio-ranges = <&cpm_pinctrl 0 0 32>;
+		gpio-ranges = <&CP110_LABEL(pinctrl) 0 0 32>;
 	};
 
 };
+
+SYSTEM CONTROLLER 1
+===================
+
+Thermal:
+--------
+
+The thermal IP can probe the temperature all around the processor. It
+may feature several channels, each of them wired to one sensor.
+
+For common binding part and usage, refer to
+Documentation/devicetree/bindings/thermal/thermal.txt
+
+Required properties:
+- compatible: must be one of:
+  * marvell,armada-cp110-thermal
+- reg: register range associated with the thermal functions.
+
+Optional properties:
+- #thermal-sensor-cells: shall be <1> when thermal-zones subnodes refer
+  to this IP and represents the channel ID. There is one sensor per
+  channel. O refers to the thermal IP internal channel.
+
+Example:
+CP110_LABEL(syscon1): system-controller@6f8000 {
+	compatible = "syscon", "simple-mfd";
+	reg = <0x6f8000 0x1000>;
+
+	CP110_LABEL(thermal): thermal-sensor@70 {
+		compatible = "marvell,armada-cp110-thermal";
+		reg = <0x70 0x10>;
+		#thermal-sensor-cells = <1>;
+	};
+};

Documentation/devicetree/bindings/thermal/armada-thermal.txt

@@ -10,6 +10,11 @@ Required properties:
     * marvell,armada-ap806-thermal
     * marvell,armada-cp110-thermal
 
+Note: these bindings are deprecated for AP806/CP110 and should instead
+follow the rules described in:
+Documentation/devicetree/bindings/arm/marvell/ap806-system-controller.txt
+Documentation/devicetree/bindings/arm/marvell/cp110-system-controller.txt
+
 - reg: Device's register space.
   Two entries are expected, see the examples below. The first one points
   to the status register (4B). The second one points to the control

Documentation/devicetree/bindings/thermal/qcom-tsens.txt

@@ -1,22 +1,41 @@
 * QCOM SoC Temperature Sensor (TSENS)
 
 Required properties:
-- compatible :
- - "qcom,msm8916-tsens" : For 8916 Family of SoCs
- - "qcom,msm8974-tsens" : For 8974 Family of SoCs
- - "qcom,msm8996-tsens" : For 8996 Family of SoCs
+- compatible:
+  Must be one of the following:
+    - "qcom,msm8916-tsens" (MSM8916)
+    - "qcom,msm8974-tsens" (MSM8974)
+    - "qcom,msm8996-tsens" (MSM8996)
+    - "qcom,msm8998-tsens", "qcom,tsens-v2" (MSM8998)
+    - "qcom,sdm845-tsens", "qcom,tsens-v2" (SDM845)
+  The generic "qcom,tsens-v2" property must be used as a fallback for any SoC
+  with version 2 of the TSENS IP. MSM8996 is the only exception because the
+  generic property did not exist when support was added.
+
+- reg: Address range of the thermal registers.
+  New platforms containing v2.x.y of the TSENS IP must specify the SROT and TM
+  register spaces separately, with order being TM before SROT.
+  See Example 2, below.
 
-- reg: Address range of the thermal registers
 - #thermal-sensor-cells : Should be 1. See ./thermal.txt for a description.
 - #qcom,sensors: Number of sensors in tsens block
 - Refer to Documentation/devicetree/bindings/nvmem/nvmem.txt to know how to specify
 nvmem cells
 
-Example:
+Example 1 (legacy support before a fallback tsens-v2 property was introduced):
 tsens: thermal-sensor@900000 {
 		compatible = "qcom,msm8916-tsens";
 		reg = <0x4a8000 0x2000>;
 		nvmem-cells = <&tsens_caldata>, <&tsens_calsel>;
 		nvmem-cell-names = "caldata", "calsel";
 		#thermal-sensor-cells = <1>;
 	};
+
+Example 2 (for any platform containing v2 of the TSENS IP):
+tsens0: thermal-sensor@c263000 {
+		compatible = "qcom,sdm845-tsens", "qcom,tsens-v2";
+		reg = <0xc263000 0x1ff>, /* TM */
+			<0xc222000 0x1ff>; /* SROT */
+		#qcom,sensors = <13>;
+		#thermal-sensor-cells = <1>;
+	};