Type changes round4

_build/redirection_map

@@ -336,3 +336,5 @@
 /components/dependency_injection/autowiring /service_container/autowiring
 /event_dispatcher/class_extension /event_dispatcher
 /security/target_path /security
+/service_container/third_party /service_container
+/templating/templating_service /templates

bundles/best_practices.rst

@@ -384,7 +384,14 @@ If the bundle defines services, they must be prefixed with the bundle alias.
 For example, AcmeBlogBundle services must be prefixed with ``acme_blog``.
 
 In addition, services not meant to be used by the application directly, should
-be :ref:`defined as private <container-private-services>`.
+be :ref:`defined as private <container-private-services>`. For public services,
+:ref:`aliases should be created <service-autowiring-alias>` from the interface/class
+to the service id. For example, in MonlogBundle, an alias is created from
+``Psr\Log\LoggerInterface`` to ``logger`` so that the ``LoggerInterface`` type-hint
+can be used for autowiring.
+
+Services should not use autowiring or autoconfiguration. Instead, all services should
+be defined explicitly.
 
 .. seealso::
 

bundles/extension.rst

@@ -129,6 +129,12 @@ read more about it, see the ":doc:`/bundles/configuration`" article.
 Adding Classes to Compile
 -------------------------
 
+.. note::
+
+    The ``addClassesToCompile()`` method was deprecated in Symfony 3.3, and will
+    be removed in Symfony 4.0. If you want to use this method and be compatible
+    with Symfony 4.0, check to see if the method exists before calling it.
+
 Symfony creates a big ``classes.php`` file in the cache directory to aggregate
 the contents of the PHP classes that are used in every request. This reduces the
 I/O operations and increases the application performance.

console/command_in_controller.rst

@@ -32,12 +32,12 @@ Run this command from inside your controller via::
     use Symfony\Component\Console\Input\ArrayInput;
     use Symfony\Component\Console\Output\BufferedOutput;
     use Symfony\Component\HttpFoundation\Response;
+    use Symfony\Component\HttpKernel\KernelInterface;
 
     class SpoolController extends Controller
     {
-        public function sendSpoolAction($messages = 10)
+        public function sendSpoolAction($messages = 10, KernelInterface $kernel)
         {
-            $kernel = $this->get('kernel');
             $application = new Application($kernel);
             $application->setAutoExit(false);
 

console/commands_as_services.rst

@@ -4,173 +4,64 @@
 How to Define Commands as Services
 ==================================
 
-By default, Symfony will take a look in the ``Command`` directory of each
-bundle and automatically register your commands. If a command extends the
-:class:`Symfony\\Bundle\\FrameworkBundle\\Command\\ContainerAwareCommand`,
-Symfony will even inject the container.
-While making life easier, this has some limitations:
+If you're using the :ref:`default services.yml configuration <service-container-services-load-example>`,
+your command classes are already registered as services. Great! This is the recommended
+setup, but it's not required. Symfony also looks in the ``Command`` directory of
+each bundle and automatically registers those classes as commands.
 
-* Your command must live in the ``Command`` directory;
-* There's no way to conditionally register your command based on the environment
-  or availability of some dependencies;
-* You can't access the container in the ``configure()`` method (because
-  ``setContainer()`` hasn't been called yet);
-* You can't use the same class to create many commands (i.e. each with
-  different configuration).
+.. note::
 
-To solve these problems, you can register your command as a service and tag it
-with ``console.command``:
+    You can also manually register your command as a service by configure the service
+    and :doc:`tagging it </service_container/tags>` with ``console.command``.
 
-.. configuration-block::
+In either case, if your class extends :class:`Symfony\\Bundle\\FrameworkBundle\\Command\\ContainerAwareCommand`,
+you can access public services via ``$this->getContainer()->get('SERVICE_ID')``.
 
-    .. code-block:: yaml
+But if your class is registered as a service, you can instead access services by
+using normal :ref:`dependency injection <services-constructor-injection>`.
 
-        # app/config/config.yml
-        services:
-            AppBundle\Command\MyCommand: [console.command]
+For example, suppose you want to log something from within your command::
 
-    .. code-block:: xml
-
-        <!-- app/config/config.xml -->
-        <?xml version="1.0" encoding="UTF-8" ?>
-        <container xmlns="http://symfony.com/schema/dic/services"
-            xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
-            xsi:schemaLocation="http://symfony.com/schema/dic/services
-                http://symfony.com/schema/dic/services/services-1.0.xsd">
-
-            <services>
-                <service id="AppBundle\Command\MyCommand">
-                    <tag name="console.command" />
-                </service>
-            </services>
-
-        </container>
-
-    .. code-block:: php
-
-        // app/config/config.php
-        use AppBundle\Command\MyCommand;
-
-        $container->register(MyCommand::class)
-            ->addTag('console.command')
-        ;
-
-Using Dependencies and Parameters to Set Default Values for Options
--------------------------------------------------------------------
-
-Imagine you want to provide a default value for the ``name`` option. You could
-pass one of the following as the 5th argument of ``addOption()``:
-
-* a hardcoded string;
-* a container parameter (e.g. something from ``parameters.yml``);
-* a value computed by a service (e.g. a repository).
-
-By extending ``ContainerAwareCommand``, only the first is possible, because you
-can't access the container inside the ``configure()`` method. Instead, inject
-any parameter or service you need into the constructor. For example, suppose you
-store the default value in some ``%command.default_name%`` parameter::
-
-    // src/AppBundle/Command/GreetCommand.php
     namespace AppBundle\Command;
 
+    use Psr\Log\LoggerInterface;
     use Symfony\Component\Console\Command\Command;
     use Symfony\Component\Console\Input\InputInterface;
-    use Symfony\Component\Console\Input\InputOption;
     use Symfony\Component\Console\Output\OutputInterface;
 
-    class GreetCommand extends Command
+    class SunshineCommand extends Command
     {
-        protected $defaultName;
+        private $logger;
 
-        public function __construct($defaultName)
+        public function __construct(LoggerInterface $logger)
         {
-            $this->defaultName = $defaultName;
+            $this->logger = $logger;
 
+            // you *must* call the parent constructor
             parent::__construct();
         }
 
         protected function configure()
         {
-            // try to avoid work here (e.g. database query)
-            // this method is *always* called - see warning below
-            $defaultName = $this->defaultName;
-
             $this
-                ->setName('demo:greet')
-                ->setDescription('Greet someone')
-                ->addOption(
-                    'name',
-                    '-n',
-                    InputOption::VALUE_REQUIRED,
-                    'Who do you want to greet?',
-                    $defaultName
-                )
-            ;
+                ->setName('app:sunshine')
+                ->setDescription('Hello PhpStorm');
         }
 
         protected function execute(InputInterface $input, OutputInterface $output)
         {
-            $name = $input->getOption('name');
-
-            $output->writeln($name);
+            $this->logger->info('Waking up the sun');
+            // ...
         }
     }
 
-Now, just update the arguments of your service configuration like normal to
-inject the ``command.default_name`` parameter:
-
-.. configuration-block::
-
-    .. code-block:: yaml
-
-        # app/config/config.yml
-        parameters:
-            command.default_name: Javier
-
-        services:
-            AppBundle\Command\MyCommand:
-                arguments: ["%command.default_name%"]
-                tags: [console.command]
-
-    .. code-block:: xml
-
-        <!-- app/config/config.xml -->
-        <?xml version="1.0" encoding="UTF-8" ?>
-        <container xmlns="http://symfony.com/schema/dic/services"
-            xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
-            xsi:schemaLocation="http://symfony.com/schema/dic/services
-                http://symfony.com/schema/dic/services/services-1.0.xsd">
-
-            <parameters>
-                <parameter key="command.default_name">Javier</parameter>
-            </parameters>
-
-            <services>
-                <service class="AppBundle\Command\MyCommand">
-                    <argument>%command.default_name%</argument>
-                    <tag name="console.command" />
-                </service>
-            </services>
-
-        </container>
-
-    .. code-block:: php
-
-        // app/config/config.php
-        use AppBundle\Command\MyCommand;
-
-        $container->setParameter('command.default_name', 'Javier');
-
-        $container
-            ->register(MyCommand::class)
-            ->setArguments(array('%command.default_name%'))
-            ->addTag('console.command')
-        ;
-
-Great, you now have a dynamic default value!
+If you're using the :ref:`default services.yml configuration <service-container-services-load-example>`,
+the command class will automatically be registered as a service and passed the ``$logger``
+argument (thanks to autowiring). In other words, *just* by creating this class, everything
+works! You can call the ``app:sunshine`` command and start logging.
 
 .. caution::
 
-    Be careful not to actually do any work in ``configure`` (e.g. make database
-    queries), as your code will be run, even if you're using the console to
-    execute a different command.
+    You *do* have access to services in ``configure()``. However, try to avoid doing
+    any work (e.g. making database queries), as that code will be run, even if you're
+    using the console to execute a different command.

console/logging.rst

@@ -10,3 +10,6 @@ listener for the console.
 
 Starting from Symfony 3.3, the Console component provides automatic error and
 exception logging.
+
+You can of course also access and use the :doc:`logger </logging>` service to
+log messages.