M487: Support custom board

targets/TARGET_NUVOTON/TARGET_M480/PeripheralNames.h

@@ -18,6 +18,7 @@
 #define MBED_PERIPHERALNAMES_H
 
 #include "cmsis.h"
+#include "PinNames.h"
 
 #ifdef __cplusplus
 extern "C" {
@@ -80,7 +81,16 @@ typedef enum {
     UART_4 = (int) NU_MODNAME(UART4_BASE, 4, 0),
     UART_5 = (int) NU_MODNAME(UART5_BASE, 5, 0),
     // NOTE: board-specific
-    STDIO_UART  = UART_0
+#if defined(MBED_CONF_TARGET_USB_UART)
+    USB_UART    = MBED_CONF_TARGET_USB_UART,
+#else
+    USB_UART    = NC,
+#endif
+#if defined(MBED_CONF_TARGET_STDIO_UART)
+    STDIO_UART  = MBED_CONF_TARGET_STDIO_UART
+#else
+    STDIO_UART  = USB_UART
+#endif
 } UARTName;
 
 typedef enum {

targets/TARGET_NUVOTON/TARGET_M480/PinNames.h → targets/TARGET_NUVOTON/TARGET_M480/PinNamesCommon.h

@@ -1,5 +1,7 @@
-/* mbed Microcontroller Library
- * Copyright (c) 2015-2016 Nuvoton
+/*
+ * Copyright (c) 2020, Nuvoton Technology Corporation
+ *
+ * SPDX-License-Identifier: Apache-2.0
  *
  * Licensed under the Apache License, Version 2.0 (the "License");
  * you may not use this file except in compliance with the License.
@@ -13,8 +15,8 @@
  * See the License for the specific language governing permissions and
  * limitations under the License.
  */
-#ifndef MBED_PINNAMES_H
-#define MBED_PINNAMES_H
+#ifndef __PIN_NAME_COMMON_H__
+#define __PIN_NAME_COMMON_H__
 
 #include "cmsis.h"
 
@@ -59,93 +61,19 @@ typedef enum {
     PullNone = 0,
     PullDown,
     PullUp,
-    
+
     /* I/O mode */
     InputOnly,
     PushPullOutput,
     OpenDrain,
     QuasiBidirectional,
-    
+
     /* Default input pull mode */
     PullDefault = PullUp
 } PinMode;
 
-typedef enum {
-    // Not connected
-    NC = (int)0xFFFFFFFF,
-
-    // Generic naming
-    PA_0    = NU_PORT_N_PIN_TO_PINNAME(0, 0), PA_1, PA_2, PA_3, PA_4, PA_5, PA_6, PA_7, PA_8, PA_9, PA_10, PA_11, PA_12, PA_13, PA_14, PA_15,
-    PB_0    = NU_PORT_N_PIN_TO_PINNAME(1, 0), PB_1, PB_2, PB_3, PB_4, PB_5, PB_6, PB_7, PB_8, PB_9, PB_10, PB_11, PB_12, PB_13, PB_14, PB_15,
-    PC_0    = NU_PORT_N_PIN_TO_PINNAME(2, 0), PC_1, PC_2, PC_3, PC_4, PC_5, PC_6, PC_7, PC_8, PC_9, PC_10, PC_11, PC_12, PC_13, PC_14,
-    PD_0    = NU_PORT_N_PIN_TO_PINNAME(3, 0), PD_1, PD_2, PD_3, PD_4, PD_5, PD_6, PD_7, PD_8, PD_9, PD_10, PD_11, PD_12, PD_13, PD_14,
-    PE_0    = NU_PORT_N_PIN_TO_PINNAME(4, 0), PE_1, PE_2, PE_3, PE_4, PE_5, PE_6, PE_7, PE_8, PE_9, PE_10, PE_11, PE_12, PE_13, PE_14, PE_15,
-    PF_0    = NU_PORT_N_PIN_TO_PINNAME(5, 0), PF_1, PF_2, PF_3, PF_4, PF_5, PF_6, PF_7, PF_8, PF_9, PF_10, PF_11,
-    PG_0    = NU_PORT_N_PIN_TO_PINNAME(6, 0), PG_1, PG_2, PG_3, PG_4, PG_5, PG_6, PG_7, PG_8, PG_9, PG_10, PG_11, PG_12, PG_13, PG_14, PG_15,
-    PH_0    = NU_PORT_N_PIN_TO_PINNAME(7, 0), PH_1, PH_2, PH_3, PH_4, PH_5, PH_6, PH_7, PH_8, PH_9, PH_10, PH_11,
-
-    // Arduino UNO naming
-    A0 = PB_6,
-    A1 = PB_7,
-    A2 = PB_8,
-    A3 = PB_9,
-    A4 = PB_0,
-    A5 = PB_1,
-
-    D0 = PB_2,
-    D1 = PB_3,
-    D2 = PC_9,
-    D3 = PC_10,
-    D4 = PC_11,
-    D5 = PC_12,
-    D6 = PE_4,
-    D7 = PE_5,
-    D8 = PA_5,
-    D9 = PA_4,
-    D10 = PA_3,
-    D11 = PA_0,
-    D12 = PA_1,
-    D13 = PA_2,
-    D14 = PG_1,
-    D15 = PG_0,
-
-    I2C_SCL = D15,
-    I2C_SDA = D14,
-
-    // Note: board-specific
-    // UART naming
-    USBTX = PB_13,
-    USBRX = PB_12,
-    STDIO_UART_TX   = USBTX,
-    STDIO_UART_RX   = USBRX,
-    SERIAL_TX = USBTX,
-    SERIAL_RX = USBRX,    
-    // LED naming
-    LED_RED = PH_0,
-    LED_YELLOW = PH_1,
-    LED_GREEN = PH_2,
-    LED1 = LED_RED,
-    LED2 = LED_YELLOW,
-    LED3 = LED_GREEN,
-    LED4 = LED1,    // No real LED. Just for passing ATS.
-    // Button naming
-#if TARGET_NUMAKER_PFM_M487
-    SW2 = PG_15,
-    SW3 = PF_11,
-#elif TARGET_NUMAKER_IOT_M487
-    SW2 = PF_11,
-    SW3 = PG_5,
-#endif
-    BUTTON1 = SW2,
-    BUTTON2 = SW3,
-
-    // Force PinName to 32-bit required by NU_PINNAME_BIND(...)
-    FORCE_ENUM_PINNAME_32BIT = 0x7FFFFFFF,
-
-} PinName;
-
 #ifdef __cplusplus
 }
 #endif
 
-#endif // MBED_PINNAMES_H
+#endif // __PIN_NAME_COMMON_H__

targets/TARGET_NUVOTON/TARGET_M480/TARGET_NUMAKER_IOT_M487/PinNames.h

@@ -0,0 +1,120 @@
+/*
+ * Copyright (c) 2020, Nuvoton Technology Corporation
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_PINNAMES_H
+#define MBED_PINNAMES_H
+
+#include "cmsis.h"
+#include "PinNamesCommon.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+    // Not connected
+    NC = (int)0xFFFFFFFF,
+
+    // Generic naming
+    PA_0    = NU_PINNAME(0, 0), PA_1, PA_2, PA_3, PA_4, PA_5, PA_6, PA_7, PA_8, PA_9, PA_10, PA_11, PA_12, PA_13, PA_14, PA_15,
+    PB_0    = NU_PINNAME(1, 0), PB_1, PB_2, PB_3, PB_4, PB_5, PB_6, PB_7, PB_8, PB_9, PB_10, PB_11, PB_12, PB_13, PB_14, PB_15,
+    PC_0    = NU_PINNAME(2, 0), PC_1, PC_2, PC_3, PC_4, PC_5, PC_6, PC_7, PC_8, PC_9, PC_10, PC_11, PC_12, PC_13, PC_14,
+    PD_0    = NU_PINNAME(3, 0), PD_1, PD_2, PD_3, PD_4, PD_5, PD_6, PD_7, PD_8, PD_9, PD_10, PD_11, PD_12, PD_13, PD_14,
+    PE_0    = NU_PINNAME(4, 0), PE_1, PE_2, PE_3, PE_4, PE_5, PE_6, PE_7, PE_8, PE_9, PE_10, PE_11, PE_12, PE_13, PE_14, PE_15,
+    PF_0    = NU_PINNAME(5, 0), PF_1, PF_2, PF_3, PF_4, PF_5, PF_6, PF_7, PF_8, PF_9, PF_10, PF_11,
+    PG_0    = NU_PINNAME(6, 0), PG_1, PG_2, PG_3, PG_4, PG_5, PG_6, PG_7, PG_8, PG_9, PG_10, PG_11, PG_12, PG_13, PG_14, PG_15,
+    PH_0    = NU_PINNAME(7, 0), PH_1, PH_2, PH_3, PH_4, PH_5, PH_6, PH_7, PH_8, PH_9, PH_10, PH_11,
+
+    // Arduino UNO naming
+    A0 = PB_6,
+    A1 = PB_7,
+    A2 = PB_8,
+    A3 = PB_9,
+    A4 = PB_0,
+    A5 = PB_1,
+
+    D0 = PB_2,
+    D1 = PB_3,
+    D2 = PC_9,
+    D3 = PC_10,
+    D4 = PC_11,
+    D5 = PC_12,
+    D6 = PE_4,
+    D7 = PE_5,
+    D8 = PA_5,
+    D9 = PA_4,
+    D10 = PA_3,
+    D11 = PA_0,
+    D12 = PA_1,
+    D13 = PA_2,
+    D14 = PG_1,
+    D15 = PG_0,
+
+    // Note: board-specific
+    // UART naming
+#if defined(MBED_CONF_TARGET_USB_UART_TX)
+    USBTX           = MBED_CONF_TARGET_USB_UART_TX,
+#else
+    USBTX           = NC,
+#endif
+#if defined(MBED_CONF_TARGET_USB_UART_RX)
+    USBRX           = MBED_CONF_TARGET_USB_UART_RX,
+#else
+    USBRX           = NC,
+#endif
+#if defined(MBED_CONF_TARGET_STDIO_UART_TX)
+    STDIO_UART_TX   = MBED_CONF_TARGET_STDIO_UART_TX,
+#else
+    STDIO_UART_TX   = USBTX,
+#endif
+#if defined(MBED_CONF_TARGET_STDIO_UART_RX)
+    STDIO_UART_RX   = MBED_CONF_TARGET_STDIO_UART_RX,
+#else
+    STDIO_UART_RX   = USBRX,
+#endif
+    SERIAL_TX = D10,
+    SERIAL_RX = D13,
+
+    // I2C naming
+    I2C_SCL = D15,
+    I2C_SDA = D14,
+
+    // LED naming
+    LED_RED = PH_0,
+    LED_YELLOW = PH_1,
+    LED_GREEN = PH_2,
+    LED1 = LED_RED,
+    LED2 = LED_YELLOW,
+    LED3 = LED_GREEN,
+    LED4 = LED1,    // No real LED. Just for passing ATS.
+
+    // Button naming
+    SW2 = PF_11,
+    SW3 = PG_5,
+    BUTTON1 = SW2,
+    BUTTON2 = SW3,
+
+    // Force PinName to 32-bit required by NU_PINNAME_BIND(...)
+    FORCE_ENUM_PINNAME_32BIT = 0x7FFFFFFF,
+
+} PinName;
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif // MBED_PINNAMES_H

targets/TARGET_NUVOTON/TARGET_M480/TARGET_NUMAKER_PFM_M487/PinNames.h

@@ -0,0 +1,120 @@
+/*
+ * Copyright (c) 2020, Nuvoton Technology Corporation
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_PINNAMES_H
+#define MBED_PINNAMES_H
+
+#include "cmsis.h"
+#include "PinNamesCommon.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+    // Not connected
+    NC = (int)0xFFFFFFFF,
+
+    // Generic naming
+    PA_0    = NU_PINNAME(0, 0), PA_1, PA_2, PA_3, PA_4, PA_5, PA_6, PA_7, PA_8, PA_9, PA_10, PA_11, PA_12, PA_13, PA_14, PA_15,
+    PB_0    = NU_PINNAME(1, 0), PB_1, PB_2, PB_3, PB_4, PB_5, PB_6, PB_7, PB_8, PB_9, PB_10, PB_11, PB_12, PB_13, PB_14, PB_15,
+    PC_0    = NU_PINNAME(2, 0), PC_1, PC_2, PC_3, PC_4, PC_5, PC_6, PC_7, PC_8, PC_9, PC_10, PC_11, PC_12, PC_13, PC_14,
+    PD_0    = NU_PINNAME(3, 0), PD_1, PD_2, PD_3, PD_4, PD_5, PD_6, PD_7, PD_8, PD_9, PD_10, PD_11, PD_12, PD_13, PD_14,
+    PE_0    = NU_PINNAME(4, 0), PE_1, PE_2, PE_3, PE_4, PE_5, PE_6, PE_7, PE_8, PE_9, PE_10, PE_11, PE_12, PE_13, PE_14, PE_15,
+    PF_0    = NU_PINNAME(5, 0), PF_1, PF_2, PF_3, PF_4, PF_5, PF_6, PF_7, PF_8, PF_9, PF_10, PF_11,
+    PG_0    = NU_PINNAME(6, 0), PG_1, PG_2, PG_3, PG_4, PG_5, PG_6, PG_7, PG_8, PG_9, PG_10, PG_11, PG_12, PG_13, PG_14, PG_15,
+    PH_0    = NU_PINNAME(7, 0), PH_1, PH_2, PH_3, PH_4, PH_5, PH_6, PH_7, PH_8, PH_9, PH_10, PH_11,
+
+    // Arduino UNO naming
+    A0 = PB_6,
+    A1 = PB_7,
+    A2 = PB_8,
+    A3 = PB_9,
+    A4 = PB_0,
+    A5 = PB_1,
+
+    D0 = PB_2,
+    D1 = PB_3,
+    D2 = PC_9,
+    D3 = PC_10,
+    D4 = PC_11,
+    D5 = PC_12,
+    D6 = PE_4,
+    D7 = PE_5,
+    D8 = PA_5,
+    D9 = PA_4,
+    D10 = PA_3,
+    D11 = PA_0,
+    D12 = PA_1,
+    D13 = PA_2,
+    D14 = PG_1,
+    D15 = PG_0,
+
+    // Note: board-specific
+    // UART naming
+#if defined(MBED_CONF_TARGET_USB_UART_TX)
+    USBTX           = MBED_CONF_TARGET_USB_UART_TX,
+#else
+    USBTX           = NC,
+#endif
+#if defined(MBED_CONF_TARGET_USB_UART_RX)
+    USBRX           = MBED_CONF_TARGET_USB_UART_RX,
+#else
+    USBRX           = NC,
+#endif
+#if defined(MBED_CONF_TARGET_STDIO_UART_TX)
+    STDIO_UART_TX   = MBED_CONF_TARGET_STDIO_UART_TX,
+#else
+    STDIO_UART_TX   = USBTX,
+#endif
+#if defined(MBED_CONF_TARGET_STDIO_UART_RX)
+    STDIO_UART_RX   = MBED_CONF_TARGET_STDIO_UART_RX,
+#else
+    STDIO_UART_RX   = USBRX,
+#endif
+    SERIAL_TX = D10,
+    SERIAL_RX = D13,
+
+    // I2C naming
+    I2C_SCL = D15,
+    I2C_SDA = D14,
+
+    // LED naming
+    LED_RED = PH_0,
+    LED_YELLOW = PH_1,
+    LED_GREEN = PH_2,
+    LED1 = LED_RED,
+    LED2 = LED_YELLOW,
+    LED3 = LED_GREEN,
+    LED4 = LED1,    // No real LED. Just for passing ATS.
+
+    // Button naming
+    SW2 = PG_15,
+    SW3 = PF_11,
+    BUTTON1 = SW2,
+    BUTTON2 = SW3,
+
+    // Force PinName to 32-bit required by NU_PINNAME_BIND(...)
+    FORCE_ENUM_PINNAME_32BIT = 0x7FFFFFFF,
+
+} PinName;
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif // MBED_PINNAMES_H