Add support for VBLUno51 board

targets/TARGET_NORDIC/TARGET_MCU_NRF51822/TARGET_VBLUNO51/PinNames.h

@@ -0,0 +1,216 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2013 Nordic Semiconductor
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+ /*
+ * PinNames for VBLUno51 board
+ */
+#ifndef MBED_PINNAMES_H
+#define MBED_PINNAMES_H
+
+#include "cmsis.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+    PIN_INPUT,
+    PIN_OUTPUT
+} PinDirection;
+
+#define PORT_SHIFT  3
+
+typedef enum {
+    p0  = 0,
+    p1  = 1,
+    p2  = 2,
+    p3  = 3,
+    p4  = 4,
+    p5  = 5,
+    p6  = 6,
+    p7  = 7,
+    p8  = 8,
+    p9  = 9,
+    p10 = 10,
+    p11 = 11,
+    p12 = 12,
+    p13 = 13,
+    p14 = 14,
+    p15 = 15,
+    p16 = 16,
+    p17 = 17,
+    p18 = 18,
+    p19 = 19,
+    p20 = 20,
+    p21 = 21,
+    p22 = 22,
+    p23 = 23,
+    p24 = 24,
+    p25 = 25,
+    p26 = 26,
+    p27 = 27,
+    p28 = 28,
+    p29 = 29,
+    p30 = 30,  
+
+    P0_0  = p0,
+    P0_1  = p1,
+    P0_2  = p2,
+    P0_3  = p3,
+    P0_4  = p4,
+    P0_5  = p5,
+    P0_6  = p6,
+    P0_7  = p7,
+
+    P0_8  = p8,
+    P0_9  = p9,
+    P0_10 = p10,
+    P0_11 = p11,
+    P0_12 = p12,
+    P0_13 = p13,
+    P0_14 = p14,
+    P0_15 = p15,
+
+    P0_16 = p16,
+    P0_17 = p17,
+    P0_18 = p18,
+    P0_19 = p19,
+    P0_20 = p20,
+    P0_21 = p21,
+    P0_22 = p22,
+    P0_23 = p23,
+
+    P0_24 = p24,
+    P0_25 = p25,
+    P0_26 = p26,
+    P0_27 = p27,
+    P0_28 = p28,
+    P0_29 = p29,
+    P0_30 = p30,
+
+    //only for mbed test suite
+    LED1    = p7,
+    LED2    = p9,
+    LED3    = p16,
+    LED4    = p17,
+
+    BUTTON1 = p15,
+    BUTTON2 = p21,
+    BUTTON3 = p22,
+    BUTTON4 = p18,
+
+    // mbed-os interface pins
+    TX_PIN_NUMBER = p10,
+    RX_PIN_NUMBER = p11,
+    RTS_PIN_NUMBER = p12,        //not on Jump
+    CTS_PIN_NUMBER = p13,        //not on Jump
+
+    USBTX = TX_PIN_NUMBER,
+    USBRX = RX_PIN_NUMBER,           
+
+    SPIS_PSELMOSI = p24,
+    SPIS_PSELMISO = p25,
+    SPIS_PSELSS = p23,    
+    SPIS_PSELSCK = p28,
+
+    SPIS_PSELMOSI1 = p24,
+    SPIS_PSELMISO1 = p25,
+    SPIS_PSELSS1 = p23,    
+    SPIS_PSELSCK1 = p28,
+
+    SPIS_PSELMOSI0 = p24,
+    SPIS_PSELMISO0 = p25,
+    SPIS_PSELSS0 = p23,    
+    SPIS_PSELSCK0 = p28,
+
+    I2C_SDA = p29,
+    I2C_SCL = p30,
+    I2C_SDA0 = p29,
+    I2C_SCL0 = p30,
+    I2C_SDA1 = p5,
+    I2C_SCL1 = p6,
+
+    //Adruino interface pins
+    D0  = p11,
+    D1  = p10,
+    D2  = p20,
+    D3  = p19,
+    D4  = p18,
+    D5  = p17,
+    D6  = p16,
+    D7  = p9,  
+    D8  = p21,
+    D9  = p22,
+    D10 = p23,
+    D11 = p24,
+    D12 = p25,
+    D13 = p28,
+    D14 = p1,
+    D15 = p2,
+    D16 = p3,
+    D17 = p4,
+    D18 = p5,
+    D19 = p6,    
+    D20 = p29, 
+    D21 = p30,    
+    D22 = p7,
+    D23 = p15,
+    D24 = p12,
+    D25 = p13,
+
+    SS = D10,
+    MOSI = D11,
+    MISO = D12,
+    SCK  = D13,
+
+    A0 = D14,
+    A1 = D15,
+    A2 = D16,
+    A3 = D17,
+    A4 = D18,
+    A5 = D19,
+
+    SDA0 = D20,
+    SCL0 = D21,
+    SDA1 = D18,
+    SCL1 = D19,
+    SDA = SDA0,
+    SCL = SCL0,
+
+    RX = D0,
+    TX = D1,
+    RTS = D24,                    //not on Jump
+    CTS = D25,                    //not on Jump
+
+    LED = D22,                    //not on Jump
+    BUT = D23,                    //not on Jump
+
+    // Not connected
+    NC = (int)0xFFFFFFFF
+} PinName;
+
+typedef enum {
+    PullNone = 0,
+    PullDown = 1,
+    PullUp = 3,
+    PullDefault = PullUp
+} PinMode;
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif

targets/TARGET_NORDIC/TARGET_MCU_NRF51822/TARGET_VBLUNO51/device.h

@@ -0,0 +1,38 @@
+// The 'features' section in 'target.json' is now used to create the device's hardware preprocessor switches.
+// Check the 'features' section of the target description in 'targets.json' for more details.
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_DEVICE_H
+#define MBED_DEVICE_H
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+#include "objects.h"
+
+#endif