ADI: compatible code for iar, gcc_arm, armc6

targets/TARGET_Analog_Devices/TARGET_ADUCM302X/TARGET_ADUCM3029/TARGET_EV_COG_AD3029LZ/PinNames.h

@@ -0,0 +1,206 @@
+/*******************************************************************************
+ * Copyright (c) 2010-2017 Analog Devices, Inc.
+ *
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ *   - Redistributions of source code must retain the above copyright notice,
+ *     this list of conditions and the following disclaimer.
+ *   - Redistributions in binary form must reproduce the above copyright notice,
+ *     this list of conditions and the following disclaimer in the documentation
+ *     and/or other materials provided with the distribution.
+ *   - Modified versions of the software must be conspicuously marked as such.
+ *   - This software is licensed solely and exclusively for use with processors
+ *     manufactured by or for Analog Devices, Inc.
+ *   - This software may not be combined or merged with other code in any manner
+ *     that would cause the software to become subject to terms and conditions
+ *     which differ from those listed here.
+ *   - Neither the name of Analog Devices, Inc. nor the names of its
+ *     contributors may be used to endorse or promote products derived
+ *     from this software without specific prior written permission.
+ *   - The use of this software may or may not infringe the patent rights of one
+ *     or more patent holders.  This license does not release you from the
+ *     requirement that you obtain separate licenses from these patent holders
+ *     to use this software.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ANALOG DEVICES, INC. AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, NON-
+ * INFRINGEMENT, TITLE, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ANALOG DEVICES, INC. OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, PUNITIVE OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, DAMAGES ARISING OUT OF
+ * CLAIMS OF INTELLECTUAL PROPERTY RIGHTS INFRINGEMENT; PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ ******************************************************************************/
+
+#ifndef MBED_PINNAMES_H
+#define MBED_PINNAMES_H
+
+#include "cmsis.h"
+
+#include "adi_gpio.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+    PIN_INPUT,
+    PIN_OUTPUT
+} PinDirection;
+
+//update
+
+#define GPIO_PORT_SHIFT 12
+
+
+typedef enum {
+    P0_00  = (0 << GPIO_PORT_SHIFT | 0 ),
+    P0_01  = (0 << GPIO_PORT_SHIFT | 1 ),
+    P0_02  = (0 << GPIO_PORT_SHIFT | 2 ),
+    P0_03  = (0 << GPIO_PORT_SHIFT | 3 ),
+    P0_04  = (0 << GPIO_PORT_SHIFT | 4 ),
+    P0_05  = (0 << GPIO_PORT_SHIFT | 5 ),
+    P0_06  = (0 << GPIO_PORT_SHIFT | 6 ),
+    P0_07  = (0 << GPIO_PORT_SHIFT | 7 ),
+    P0_08  = (0 << GPIO_PORT_SHIFT | 8 ),
+    P0_09  = (0 << GPIO_PORT_SHIFT | 9 ),
+    P0_10 = (0 << GPIO_PORT_SHIFT | 10),
+    P0_11 = (0 << GPIO_PORT_SHIFT | 11),
+    P0_12 = (0 << GPIO_PORT_SHIFT | 12),
+    P0_13 = (0 << GPIO_PORT_SHIFT | 13),
+    P0_14 = (0 << GPIO_PORT_SHIFT | 14),
+    P0_15 = (0 << GPIO_PORT_SHIFT | 15),
+    P1_00  = (1 << GPIO_PORT_SHIFT | 0 ),
+    P1_01  = (1 << GPIO_PORT_SHIFT | 1 ),
+    P1_02  = (1 << GPIO_PORT_SHIFT | 2 ),
+    P1_03  = (1 << GPIO_PORT_SHIFT | 3 ),
+    P1_04  = (1 << GPIO_PORT_SHIFT | 4 ),
+    P1_05  = (1 << GPIO_PORT_SHIFT | 5 ),
+    P1_06  = (1 << GPIO_PORT_SHIFT | 6 ),
+    P1_07  = (1 << GPIO_PORT_SHIFT | 7 ),
+    P1_08  = (1 << GPIO_PORT_SHIFT | 8 ),
+    P1_09  = (1 << GPIO_PORT_SHIFT | 9 ),
+    P1_10 = (1 << GPIO_PORT_SHIFT | 10),
+    P1_11 = (1 << GPIO_PORT_SHIFT | 11),
+    P1_12 = (1 << GPIO_PORT_SHIFT | 12),
+    P1_13 = (1 << GPIO_PORT_SHIFT | 13),
+    P1_14 = (1 << GPIO_PORT_SHIFT | 14),
+    P1_15 = (1 << GPIO_PORT_SHIFT | 15),
+    P2_00  = (2 << GPIO_PORT_SHIFT | 0 ),
+    P2_01  = (2 << GPIO_PORT_SHIFT | 1 ),
+    P2_02  = (2 << GPIO_PORT_SHIFT | 2 ),
+    P2_03  = (2 << GPIO_PORT_SHIFT | 3 ),
+    P2_04  = (2 << GPIO_PORT_SHIFT | 4 ),
+    P2_05  = (2 << GPIO_PORT_SHIFT | 5 ),
+    P2_06  = (2 << GPIO_PORT_SHIFT | 6 ),
+    P2_07  = (2 << GPIO_PORT_SHIFT | 7 ),
+    P2_08  = (2 << GPIO_PORT_SHIFT | 8 ),
+    P2_09  = (2 << GPIO_PORT_SHIFT | 9 ),
+    P2_10 = (2 << GPIO_PORT_SHIFT | 10),
+    P2_11 = (2 << GPIO_PORT_SHIFT | 11),
+
+    // USB Pins
+    USBTX = P0_10,
+    USBRX = P0_11,
+    USBTX1 = P1_15,
+    USBRX1 = P2_00,
+
+    // mbed original LED naming
+    LED1 = P2_02,
+    LED2 = P2_10,
+    LED3 = LED2,
+    LED4 = LED1,
+
+    //Push buttons
+    PB0 = P1_00,        // BTN1
+    PB1 = P0_09,        // BTN2
+    BOOT = P1_01,
+    WAKE0 = P0_15,      // JP15 to select
+    WAKE1 = P1_00,      // JP8 (BTN1 jumper) to select
+    WAKE2 = P0_13,      // JP4 to select
+    WAKE3 = P2_01,      // JP15 to select
+
+    // SPI Pins
+    SPI0_SCLK = P0_00,
+    SPI0_MOSI = P0_01,
+    SPI0_MISO = P0_02,
+    SPI0_CS0 = P0_03,
+    SPI0_CS1 = P1_10,
+    SPI0_CS2 = P2_08,
+    SPI0_CS3 = P2_09,
+
+    SPI1_SCLK = P1_06,
+    SPI1_MOSI = P1_07,
+    SPI1_MISO = P1_08,
+    SPI1_CS0 = P1_09,
+    SPI1_CS1 = P2_11,
+    SPI1_CS2 = P2_02,
+    SPI1_CS3 = P1_10,
+
+    SPI2_SCLK = P1_02,
+    SPI2_MOSI = P1_03,
+    SPI2_MISO = P1_04,
+    SPI2_CS0 = P1_05,
+    SPI2_CS1 = P0_09,
+    SPI2_CS2 = P2_10,
+    SPI2_CS3 = P2_07,
+
+    // ADC Pins
+    ADC_VIN0 = P2_03,
+    ADC_VIN1 = P2_04,
+    ADC_VIN2 = P2_05,
+    ADC_VIN3 = P2_06,
+    ADC_VIN4 = P2_07,
+    ADC_VIN5 = P2_08,
+    ADC_VIN6 = P2_09,
+    ADC_VIN7 = P2_10,
+
+    // Arduino Headers
+    D0 = P0_10,        // UART0_TXD
+    D1 = P0_11,        // UART0_RXD
+    D2 = P0_15,        // INT_WAKE0
+    D3 = P0_13,        // EXT_INT_WAKE2
+    D4 = P0_09,        // EXT_SPI2_CS1
+    D5 = P2_01,        // INT_WAKE3 or EXT_RTC1_SS1 via JP8
+    D6 = P1_11,        // GPIO_27
+    D7 = P0_12,        // GPIO_08 or GPIO_12 via JP7
+
+    D8 = P1_12,         // GPIO_28
+    D9 = P1_14,         // GPIO_30
+    D10 = SPI0_CS2,     // P2_08
+    D11 = SPI0_MOSI,    // P0_01
+    D12 = SPI0_MISO,    // P0_02
+    D13 = SPI0_SCLK,    // P0_00
+    I2C_SCL = P0_04,    // I2C_SCL
+    I2C_SDA = P0_05,    // I2C_SDA
+
+    A0 = P2_03,         // ADC0
+    A1 = P2_04,         // EXT_ADC1
+    A2 = P2_05,         // EXT_ADC2
+    A3 = P2_06,         // ADC3
+    A4 = P2_07,         // SPI2_CS3/ADC_VIN4
+    A5 = P2_10,         // EXT_GPIO42/ADC_VIN7
+
+    // Not connected
+    NC = (int)0xFFFFFFFF
+} PinName;
+
+
+typedef enum {
+    PullNone = 0,
+    PullDown = 1,
+    PullUp   = 2,
+    PullDefault = PullNone
+} PinMode;
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif