ARMmbed · cmonr · Nov 15, 2018 · Jun 25, 2018
diff --git a/platform/mbed_lib.json b/platform/mbed_lib.json
@@ -110,6 +110,9 @@
         },
         "EFR32": {
             "stdio-baud-rate": 115200
+        },
+        "UNO_91H": {
+            "stdio-baud-rate": 115200
         }
     }
 }
diff --git a/targets/TARGET_RDA/TARGET_UNO_91H/PeripheralNames.h b/targets/TARGET_RDA/TARGET_UNO_91H/PeripheralNames.h
@@ -0,0 +1,87 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2018 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_PERIPHERALNAMES_H
+#define MBED_PERIPHERALNAMES_H
+
+#include "cmsis.h"
+#include "PinNames.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+    UART_0 = (int)RDA_UART0_BASE,
+    UART_1 = (int)RDA_UART1_BASE
+} UARTName;
+
+typedef enum {
+    // Make sure GPIO_BASE & 0x1F == 0, store GPIO index at this field when mapping pins
+    GPIO_0 = (int)RDA_GPIO_BASE
+} GPIOName;
+
+typedef enum {
+    I2C_0  = (int)RDA_I2C0_BASE
+} I2CName;
+
+typedef enum {
+    SPI_0  = (int)RDA_SPI0_BASE
+} SPIName;
+
+typedef enum {
+    I2S_0  = (int)RDA_I2S_BASE
+} I2SName;
+
+typedef enum {
+    WDT_0  = (int)RDA_WDT_BASE
+} WDTName;
+
+typedef enum {
+    PWM_0 = 0,
+    PWM_1,
+    PWM_2,
+    PWM_3,
+    PWM_4,
+    PWM_5,
+    PWM_6,
+    PWM_7
+} PWMName;
+
+typedef enum {
+    ADC0_0 = 0,
+    ADC0_1,
+    ADC0_2
+} ADCName;
+
+typedef enum {
+    GPADC0_0 = 0,
+    GPADC0_1
+} GPADCName;
+
+#define STDIO_UART_TX     UART0_TX
+#define STDIO_UART_RX     UART0_RX
+#define STDIO_UART        UART_0
+
+// Default peripherals
+#define MBED_UART0        PA_0, PA_1
+#define MBED_UART1        PB_1, PB_2
+#define MBED_UARTUSB      USBTX, USBRX
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
diff --git a/targets/TARGET_RDA/TARGET_UNO_91H/PinNames.h b/targets/TARGET_RDA/TARGET_UNO_91H/PinNames.h
@@ -0,0 +1,180 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2018 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_PINNAMES_H
+#define MBED_PINNAMES_H
+
+#include "cmsis.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+    PIN_INPUT,
+    PIN_OUTPUT
+} PinDirection;
+
+#define PORT_SHIFT  8
+
+typedef enum {
+    PA_0  = (0 << PORT_SHIFT | 0 ),
+    PA_1  = (0 << PORT_SHIFT | 1 ),
+    PA_2  = (0 << PORT_SHIFT | 2 ),
+    PA_3  = (0 << PORT_SHIFT | 3 ),
+    PA_4  = (0 << PORT_SHIFT | 4 ),
+    PA_5  = (0 << PORT_SHIFT | 5 ),
+    PA_6  = (0 << PORT_SHIFT | 6 ),
+    PA_7  = (0 << PORT_SHIFT | 7 ),
+    PA_8  = (0 << PORT_SHIFT | 8 ),
+    PA_9  = (0 << PORT_SHIFT | 9 ),
+    PB_0  = (1 << PORT_SHIFT | 0 ),
+    PB_1  = (1 << PORT_SHIFT | 1 ),
+    PB_2  = (1 << PORT_SHIFT | 2 ),
+    PB_3  = (1 << PORT_SHIFT | 3 ),
+    PB_4  = (1 << PORT_SHIFT | 4 ),
+    PB_5  = (1 << PORT_SHIFT | 5 ),
+    PB_6  = (1 << PORT_SHIFT | 6 ),
+    PB_7  = (1 << PORT_SHIFT | 7 ),
+    PB_8  = (1 << PORT_SHIFT | 8 ),
+    PB_9  = (1 << PORT_SHIFT | 9 ),
+    PC_0  = (4 << PORT_SHIFT | 0 ),
+    PC_1  = (4 << PORT_SHIFT | 1 ),
+    PC_2  = (4 << PORT_SHIFT | 2 ),
+    PC_3  = (4 << PORT_SHIFT | 3 ),
+    PC_4  = (4 << PORT_SHIFT | 4 ),
+    PC_5  = (4 << PORT_SHIFT | 5 ),
+    PC_6  = (4 << PORT_SHIFT | 6 ),
+    PC_7  = (4 << PORT_SHIFT | 7 ),
+    PC_8  = (4 << PORT_SHIFT | 8 ),
+    PC_9  = (4 << PORT_SHIFT | 9 ),
+    PD_0  = (5 << PORT_SHIFT | 0 ),
+    PD_1  = (5 << PORT_SHIFT | 1 ),
+    PD_2  = (5 << PORT_SHIFT | 2 ),
+    PD_3  = (5 << PORT_SHIFT | 3 ),
+    PD_9  = (5 << PORT_SHIFT | 9 ), // Fake pin for GPADC_VBAT
+
+    UART0_RX = PA_0,
+    UART0_TX = PA_1,
+    UART1_RX = PB_1,
+    UART1_TX = PB_2,
+
+    USBRX   = UART0_RX,
+    USBTX   = UART0_TX,
+
+    I2C_SCL = PC_0,
+    I2C_SDA = PC_1,
+
+    I2S_TX_SD   = PB_1,
+    I2S_TX_WS   = PB_2,
+    I2S_TX_BCLK = PB_3,
+    I2S_RX_SD   = PB_4,
+    I2S_RX_WS   = PB_5,
+    I2S_RX_BCLK = PB_8,
+
+    GPIO_PIN0  = PB_0,
+    GPIO_PIN1  = PB_1,
+    GPIO_PIN2  = PB_2,
+    GPIO_PIN3  = PB_3,
+    GPIO_PIN4  = PB_4,
+    GPIO_PIN5  = PB_5,
+    GPIO_PIN6  = PB_6,
+    GPIO_PIN7  = PB_7,
+    GPIO_PIN8  = PB_8,
+    GPIO_PIN9  = PB_9,
+    GPIO_PIN10 = PA_8,
+    GPIO_PIN11 = PA_9,
+    GPIO_PIN12 = PC_0,
+    GPIO_PIN13 = PC_1,
+    GPIO_PIN14 = PC_2,
+    GPIO_PIN15 = PC_3,
+    GPIO_PIN16 = PC_4,
+    GPIO_PIN17 = PC_5,
+    GPIO_PIN18 = PC_6,
+    GPIO_PIN19 = PC_7,
+    GPIO_PIN20 = PC_8,
+    GPIO_PIN21 = PC_9,
+    GPIO_PIN22 = PD_0,
+    GPIO_PIN23 = PD_1,
+    GPIO_PIN24 = PD_2,
+    GPIO_PIN25 = PD_3,
+    GPIO_PIN26 = PA_0,
+    GPIO_PIN27 = PA_1,
+
+    // Another pin names for GPIO 14 - 19
+    GPIO_PIN14A = PA_2,
+    GPIO_PIN15A = PA_3,
+    GPIO_PIN16A = PA_4,
+    GPIO_PIN17A = PA_5,
+    GPIO_PIN18A = PA_6,
+    GPIO_PIN19A = PA_7,
+
+    ADC_PIN0  = PB_6,
+    ADC_PIN1  = PB_7,
+    ADC_PIN1A = PB_8, // Another pin name for ADC 1
+    ADC_PIN2  = PD_9,
+
+    LED1    = GPIO_PIN21,
+    LED2    = GPIO_PIN1,
+
+    // Arduino Pin Names
+    // Analog Ports (A0-A1)
+    A0 = PB_6,
+    A1 = PB_8,
+    // A2
+    // A3
+    // Digital Pins with "An" name
+    A4 = PB_2,
+    A5 = PB_3,
+    // Digital Port (D0-D7)
+    D0 = PB_1,
+    D1 = PB_2,
+    D2 = PB_3,
+    D3 = PB_4,
+    D4 = PB_5,
+    D5 = PB_7,
+    D6 = PB_9,
+    D7 = PC_9,
+    // Digital Port (D8-D13)
+    D8 = PB_0,
+    // D9
+    D10 = PD_1, // CS0
+    D11 = PD_2, // MOSI
+    D12 = PD_3, // MISO
+    D13 = PD_0, // CLK
+    // GND
+    // AREF
+    SDA = PC_1,
+    D14 = SDA,
+    SCL = PC_0,
+    D15 = SCL,
+
+    // Not connected
+    NC = (int)0xFFFFFFFF
+} PinName;
+
+typedef enum {
+    PullNone = 0,
+    PullDown = 1,
+    PullUp   = 2,
+    Repeater = 3,
+    PullDefault = Repeater,
+} PinMode;
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
diff --git a/targets/TARGET_RDA/TARGET_UNO_91H/PortNames.h b/targets/TARGET_RDA/TARGET_UNO_91H/PortNames.h
@@ -0,0 +1,33 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2018 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_PORTNAMES_H
+#define MBED_PORTNAMES_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+    PortA = 0,
+    PortB = 1,
+    PortC = 4,
+    PortD = 5
+} PortName;
+
+#ifdef __cplusplus
+}
+#endif
+#endif